F00 标准化、质量管理 标准查询与下载

CFR 30-71.204-2014 矿产资源. 第71部分:强制性卫生标准-表面煤矿和地下煤矿地面工作区. 第71.204节:批准的采样设备;维护和校准.

(a) Approved sampling devices shall be maintained as approved under part 74 (Coal Mine Dust Personal Sampler Units) of this chapter and calibrated in accordance with MSHA Informational Report IR 1240 (1996) "Calibration and Maintenance Procedures for Coal Mine Respirable Dust Samplers (supersedes IR 1121)"by a person certified in accordance with § 71.203 (Certified person; maintenance and calibration).

Mineral Resources. Part71:Mandatory health standards—surface coal mines and surface work areas of underground coal mines. Section71.204:Approved sampling devices; maintenance and calibration.

EJ/T 9001-2005 核工业质量管理体系要求

本标准为有下列需求的组织规定了质量管理体系要求： a）需要证实其有能力稳定地提供满足顾客和适用的法律法规要求的产品； b）通过体系的有效应用，包括体系持续改进的过程以及保证符合顾客与适用的法律法规要求，旨在增强顾客满意。 本标准规定的所有要求是通用的，旨在适用于各种类型、不同规模和提供不同产品的核工业组织，以及向核设施提供产品和服务的组织。 当本标准的任何要求因组织及其产品的特点而不适用时，可以考虑对其进行删减。 除非删减仅限于本标准第 7 章中那些不影响组织提供满足顾客和适用法律法规要求的产品的能力或责任的要求，否则不能声称符合本标准。

Requirements on quality management system for nuclear industry

CFR 10-20.2206-2014 能源. 第20部分:防辐射标准. 第M子部分:报告. 第20.2206节:个人监测报告.

(a) This section applies to each person licensed by the Commission to—

Energy. Part20:Standards for protection against radiation. Subpart M:Reports. Section20.2206:Reports of individual monitoring.

CFR 10-70.50-2014 能源. 第70部分:特殊核材料国内许可. 第G子部分:特殊核材料的控制,记录,报告和检查. 第70:50节:报告要求.

(a) Immediate report. Each licensee shall notify the NRC as soon as possible but not later than 4 hours after the discovery of an event that prevents immediate protective actions necessary to avoid exposures to radiation or radioactive materials that could exceed regulatory limits or releases of licensed material that could exceed regulatory limits (events may include fires, explosions, toxic gas releases, etc.).

Energy. Part70:Domestic licensing of special nuclear material. Subpart G:Special Nuclear Material Control, Records, Reports and Inspections. Section70.50:Reporting requirements.

ASTM C1068-03(2011) 在核工业实验室鉴定测量方法的标准指南

Because of concerns for safety and the protection of nuclear materials from theft, stringent specifications are placed on chemical processes and the chemical and physical properties of nuclear materials. Strict requirements for the control and accountability of nuclear materials are imposed on the users of those materials. Therefore, when analyses are made by a laboratory to support a project such as the fabrication of nuclear fuel materials, various performance requirements may be imposed on the laboratory. One such requirement is often the use of qualified methods. Their use gives greater assurance that the data produced will be satisfactory for the intended use of those data. A qualified method will help assure that the data produced will be comparable to data produced by the same qualified method in other laboratories. This guide provides guidance for qualifying measurement methods and for maintaining qualification. Even though all practices would be used for most qualification programs, there may be situations in which only a selected portion would be required. Care should be taken, however, that the effectiveness of qualification is not reduced when applying these practices selectively. The recommended practices in this guide are generic; based on these practices, specific actions should be developed to establish a qualification program.1.1 This guide provides guidance for selecting, validating, and qualifying measurement methods when qualification is required for a specific program. The recommended practices presented in this guide provide a major part of a quality assurance program for the laboratory data (see Fig. 1). Qualification helps to assure that the data produced will meet established requirements. 1.2 The activities intended to assure the quality of analytical laboratory measurement data are diagrammed in Fig. 1. Discussion and guidance related to some of these activities appear in the following sections:

Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry

ASTM C1068-03 在核工业实验室鉴定测量方法的标准指南

Because of concerns for safety and the protection of nuclear materials from theft, stringent specifications are placed on chemical processes and the chemical and physical properties of nuclear materials. Strict requirements for the control and accountability of nuclear materials are imposed on the users of those materials. Therefore, when analyses are made by a laboratory to support a project such as the fabrication of nuclear fuel materials, various performance requirements may be imposed on the laboratory. One such requirement is often the use of qualified methods. Their use gives greater assurance that the data produced will be satisfactory for the intended use of those data. A qualified method will help assure that the data produced will be comparable to data produced by the same qualified method in other laboratories. This guide provides guidance for qualifying measurement methods and for maintaining qualification. Even though all practices would be used for most qualification programs, there may be situations in which only a selected portion would be required. Care should be taken, however, that the effectiveness of qualification is not reduced when applying these practices selectively. The recommended practices in this guide are generic; based on these practices, specific actions should be developed to establish a qualification program.1.1 This guide provides guidance for selecting, validating, and qualifying measurement methods when qualification is required for a specific program. The recommended practices presented in this guide provide a major part of a quality assurance program for the laboratory data (see ). Qualification helps to assure that the data produced will meet established requirements.1.2 The activities intended to assure the quality of analytical laboratory measurement data are diagrammed in . Discussion and guidance related to some of these activities appear in the following sections:SectionSelection of Measurement Methods5Validation of Measurement Methods6Qualification of Measurement Methods7Control8Personnel Qualification91.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry

CFR 10-20.1703-2014 能源. 第20部分:防辐射标准. 第H子部分:呼吸道保护和控制限制在限制区内照射. 第20.1703节:个人呼吸防护设备的使用.

If the licensee assigns or permits the use of respiratory protection equipment to limit the intake of radioactive material,

Energy. Part20:Standards for protection against radiation. Subpart H:Respiratory Protection and Controls To Restrict Internal Exposure in Restricted Areas. Section20.1703:Use of individual respiratory protection equipment.

EJ/T 1165-2002 核工业产品质量与可靠性信息分类与编码要求

Classifying and coding requirements for quality and reliability data of nuclear industry product

CFR 10-20.1301-2014 能源. 第20部分:防辐射标准. 第D子部分:为公众个体辐射剂量限值. 第20.1301节:公众个人的剂量限制.

(a) Each licensee shall conduct operations so that

Energy. Part20:Standards for protection against radiation. Subpart D:Radiation Dose Limits for Individual Members of the Public. Section20.1301:Dose limits for individual members of the public.

DL/T 600-2001 电力行业标准编写基本规定

General rules for drafting electric power professional standards

DL/T 800-2001 电力企业标准编制规则

本标准规定了编制电力企业技术标准、管理标准和工作标准的基本规则。 本标准适用于电力企业标准的编制。

Rules for drafting company standards of electric power

CFR 10-20.2103-2014 能源. 第20部分:防辐射标准. 第L子部分:记录部分. 第20.2103节:调查记录.

(a) Each licensee shall maintain records showing the results of surveys and calibrations required by §§20.1501 and 20.1906(b). The licensee shall retain these records for 3 years after the record is made.

Energy. Part20:Standards for protection against radiation. Subpart L:Records. Section20.2103:Records of surveys.

ASME N-592-2001 ASNT中心认证程序.第XI节,第1部分

Boiler and Pressure Vessel,ASNT Central Certification Program Section XI, Division 1

ASNT Central Certification Program Section XI, Division 1

DB44/T 107-2000 节电型玻璃纤维增强塑料冷却塔

本标准规定了节电型玻璃纤维料（下称玻璃钢）冷却塔的热力性能和耗电比指标以及检验指标的方法。本标准适用于单塔冷却水量为3500m3/h以下，机力抽风、装有淋水填料、玻璃钢与金属件等的冷却塔。

Energy-saving glass fiber reinforced plastic cooling tower

DB44/T 108-2000 节电型自动投切稳压电源

本标准规定了节电型自动投切稳压电源的直通状态功耗以及检检的方法。适用于标称容量15kVA以下、额定电压220V、额定频率50Hz的自动投切稳压电源。

Energy-saving automatic switching regulated power supply

DB44/T 106-2000 节电型干式变压器

本标准规定了节电型干式变压器的空载损耗功率和负载损耗功率指标以及检验指标的方法。适用于35kV及以下的封闭式、非封闭式和有载调压式千式变压器。

Energy-saving dry-type transformer

CFR 10-20.1702-2014 能源. 第20部分:防辐射标准. 第H子部分:呼吸道保护和控制限制在限制区内照射. 第20.1702节:使用其他控件.

(a) When it is not practical to apply process or other engineering controls to control the concentrations of radioactive material in the air to values below those that define an airborne radioactivity area, the licensee shall, consistent with maintaining the total effective dose equivalent ALARA, increase monitoring and limit intakes by one or more of the following means—

Energy. Part20:Standards for protection against radiation. Subpart H:Respiratory Protection and Controls To Restrict Internal Exposure in Restricted Areas. Section20.1702:Use of other controls.

CFR 10-20.1701-2014 能源. 第20部分:防辐射标准. 第H子部分:呼吸道保护和控制限制在限制区内照射. 第20.1701节:使用过程中或其它工程控制.

The licensee shall use, to the extent practical, process or other engineering controls (e.g., containment, decontamination, or ventilation) to control the concentration of radioactive material in air.

Energy. Part20:Standards for protection against radiation. Subpart H:Respiratory Protection and Controls To Restrict Internal Exposure in Restricted Areas. Section20.1701:Use of process or other engineering controls.

CFR 10-20.1704-2014 能源. 第20部分:防辐射标准. 第H子部分:呼吸道保护和控制限制在限制区内照射. 第20.1704节:进一步限制使用呼吸防护设备.

The Commission may impose restrictions in addition to the provisions of §§20.1702, 20.1703, and Appendix A to Part 20, in order to:

Energy. Part20:Standards for protection against radiation. Subpart H:Respiratory Protection and Controls To Restrict Internal Exposure in Restricted Areas. Section20.1704:Further restrictions on the use of respiratory protection equipment.

CFR 10-20.1705-2014 能源. 第20部分:防辐射标准. 第H子部分:呼吸道保护和控制限制在限制区内照射. 第20.1705节:高分配保护因子的应用.

The licensee shall obtain authorization from the Commission before usingassigned protection factors in excess of those specified in Appendix A to part 20. The Commission may authorize a licensee to use higher assigned protection factors on receipt of an application that—

Energy. Part20:Standards for protection against radiation. Subpart H:Respiratory Protection and Controls To Restrict Internal Exposure in Restricted Areas. Section20.1705:Application for use of higher assigned protection factors.