F00 标准化、质量管理 标准查询与下载

CFR 10-20.2110-2014 能源. 第20部分:防辐射标准. 第L子部分:记录部分. 第20.2110节:记录形式.

Each record required by this part must be legible throughout the specified retention period. The record may be the original or a reproduced copy or a microform provided that the copy or microform is authenticated by authorized personnel and that the microform is capable of producing a clear copy throughout the required retention period. The record may also be stored in electronic media with the capability for producing legible, accurate, and complete records during the required retention period. Records, such as letters, drawings, and specifications, must include all pertinent information, such as stamps, initials, and signatures. The licensee shall maintain adequate safeguards against tampering with and loss of records.

Energy. Part20:Standards for protection against radiation. Subpart L:Records. Section20.2110:Form of records.

EJ/T 1004-1996 核工业质量计划编制指南

本标准规定了核工业企事业质量计划编制内容、程序以及审核、认可与修订要求。 本标准适用于某项具体产品、项目或合同的质量计划编制。 本标准不适用于核电。 在采用本标准时，可根据产品、项目或合同的特点作适当剪裁。

Guidelines for the preparation of quality programs for the nuclear industry

EJ/T 1023-1996 首件鉴定

本标准规定了核工业产品首件鉴定的确定原则、实施首件鉴定的范围、首件鉴定的基本要求、内容、组织管理和鉴定程序等。 本标准适用于核工业产品的试制和批量生产过程中的首件鉴定。流程性材料也可参照使用。

First Article Identification

ASTM C1210-96e1 制定核工业分析化学实验室用测量系统质量控制计划的标准指南

1.1 This standard provides guidance for establishing and maintaining a measurement system quality control program. Guidance is provided for general program considerations, preparation of quality control samples, analysis of quality control samples, quality control data analysis, analyst qualification, measurement system calibration, measurement method qualification, and measurement system maintenance.

Standard Guide for Establishing a Measurement System Quality Control Program for Analytical Chemistry Laboratories Within the Nuclear Industry

ASTM C1068-96e1 由一核工业实验室鉴定测量方法的标准指南

1.1 This guide provides guidance for selecting, validating, and qualifying measurement methods when qualification is required for a specific program. The recommended practices presented in this guide provide a major part of a quality assurance program for the laboratory data (see Fig. 1). Qualification helps to assure that the data produced will meet requirements established for those data. 1.2 The activities intended to assure the quality of analytical laboratory measurement data are diagrammed in Fig. 1. Discussion and guidance related to some of these activities appear in the following sections: Section Selection of Measurement Methods 5 Validation of Measurement Methods 6 Qualification of Measurement Methods 7 Control 8 Personnel Qualification 9 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry

CFR 30-71.209-2014 矿产资源. 第71部分:强制性卫生标准-表面煤矿和地下煤矿地面工作区. 第71.209节:吸性粉尘采样;变速器操作员.

(a) The operator shall transmit within 24 hours after the end of the sampling shift all samples collected to fulfill the requirements of this part in containers provided by the manufacturer of the filter cassette to: Respirable Dust Processing Laboratory, Pittsburgh Safety and Health Technology Center, Cochran Mill Road, Building 38, P.O. Box 18179, Pittsburgh, Pennsylvania 15236–0179, or to any other address designated by the District Manager.

Mineral Resources. Part71:Mandatory health standards—surface coal mines and surface work areas of underground coal mines. Section71.209:Respirable dust samples; transmission by operator.

CFR 30-70.209-2014 矿产资源. 第70部分:强制性卫生标准-地下煤矿. 第70.209节:呼吸性粉尘采样;通过运营商的传输.

(a) The operator shall transmit within 24 hours after the end of the samplingshift all samples collected to fulfill the requirements of this part in containers provided by the manufacturer of the filter cassette to: Respirable Dust Processing Laboratory, Pittsburgh Safety and Health Technology Center, Cochran Mill Road, Building 38, P.O. Box 18179, Pittsburgh, Pennsylvania 15236–0179, or to any other address designated by the District Manager.

Mineral Resources. Part70:Mandatory health standards—underground coal mines. Section70.209:Respirable dust samples; transmission by operator.

CFR 30-90.209-2014 矿产资源. 第90部分:对有尘肺病的煤矿工人的强制性卫生标准. 第90.209节:呼吸性粉尘采样;变速器操作员.

(a) The operator shall transmit within 24 hours after the end of the sampling shift all samples collected to fulfill the requirements of this part in containers provided by the manufacturer of the filter cassette to: Respirable Dust Processing Laboratory, Pittsburgh Safety and Health Technology Center, Cochran Mill Road, Building 38, P.O. Box 18179, Pittsburgh, Pennsylvania 15236–0179, or to any other address designated by the District Manager.

Mineral Resources. Part90:Mandatory health standards—coal miners who have evidence of the development of pneumoconiosis. Section90.209:Respirable dust samples; transmission by operator.

EJ/T 962-1995 核工业外协件质量控制要求

Quality Control Requirements for Outsourcing Documents in the Nuclear Industry

EJ/T 963-1995 核工业专用工装质量控制

本标准规定了核工业机械产品专用工艺装备设计、制造、检验、验证、使用、管理、周期检定全过程的质量控制要求。 本标准适用于核设备、仪器以及其他机械产品的专用工装。采用本标准时，允许根据产品特点进行适当的裁剪。

Quality control of special tooling for nuclear industry

CFR 10-20.1204-2014 能源. 第20部分:防辐射标准. 第C子部分:职业剂量限值. 第20.1204节:内部暴露量的测定.

(a) For purposes of assessing dose used to determine compliance with occupational dose equivalent limits, the licensee shall, when required under §20.1502, take suitable and timely measurements of

Energy. Part20:Standards for protection against radiation. Subpart C:Occupational Dose Limits. Section20.1204:Determination of internal exposure.

CFR 10-20.1902-2014 能源. 第20部分:防辐射标准. 第J子部分:预防程序. 第20.1902节:张贴要求.

(a) Posting of radiation areas. The licensee shall post each radiation area with a conspicuous sign or signs bearing the radiation symbol and the words ‘‘CAUTION, RADIATION AREA.’’

Energy. Part20:Standards for protection against radiation. Subpart J:Precautionary Procedures. Section20.1902:Posting requirements.

CFR 10-20.1302-2014 能源. 第20部分:防辐射标准. 第D子部分:为公众个体辐射剂量限值. 第20.1302节:公众的个人成员的剂量限制.

(a) The licensee shall make or cause to be made, as appropriate, surveys of radiation levels in unrestricted and controlled areas and radioactive materials in effluents released to unrestricted and controlled areas to demonstrate compliance with the dose limits for individual members of the public in §20.1301.

Energy. Part20:Standards for protection against radiation. Subpart D:Radiation Dose Limits for Individual Members of the Public. Section20.1302:Compliance with dose limits for individual members of the public.

CFR 10-20.2204-2014 能源. 第20部分:防辐射标准. 第M子部分:报告. 第20.2204节:计划特别曝光的报告.

The licensee shall submit a written report to the Administrator of the appropriate NRC Regional Office listed in appendix D to part 20 within 30 days following any planned special exposure conducted in accordance with §20.1206, informing the Commission that a planned special exposure was conducted and indicating the date the planned special exposure occurred and the information required by §20.2105.

Energy. Part20:Standards for protection against radiation. Subpart M:Reports. Section20.2204:Reports of planned special exposures.

CFR 10-20.2003-2014 能源. 第20部分:防辐射标准. 第K子部分:垃圾处理. 第20.2003节:释放到卫生污水处理.

(a) A licensee may discharge licensed material into sanitary sewerage if each of the following conditions is satisfied:

Energy. Part20:Standards for protection against radiation. Subpart K:Waste Disposal. Section20.2003:Disposal by release into sanitary sewerage.

CFR 10-20.1008-2014 能源. 第20部分:防辐射标准. 第A子部分:总则. 第20.1008节:实施.

(a) [Reserved]

Energy. Part20:Standards for protection against radiation. Subpart A:General Provisions. Section20.1008:Implementation.

EJ/T 870-1994 核工业建筑安装企业质量手册编写要求

本标准规定了核工业建筑安装企业质量手册的基本内容和构成，批准、发布及管理的要求。 本标准适用于核工业建筑安装企业质量手册的编制。

Requirements for compiling quality manual of construction and installation enterprises in nuclear industry

EJ/T 871-1994 核工业产品定型质量控制要求

本标准规定了核工业装配性产品定型质量控制的基本要求。 本标准适用于核工业研制的装配性产品的定型。流程性产品亦可参照执行。

Nuclear industry product finalization quality control requirements

EJ/T 873-1994 核工业质量管理规范

本标准规定了核工业质量信息管理的基本要求和工作内容。可作为建立质量信息系统和开展质量信息管理工作的基本依据。 本标准适用于核工业企（事）业单位的质量信息管理。

Nuclear Industry Quality Management Practices

EJ/T 869-1994 核工业建筑安装企业质量保证大纲编写要求

本标准规定了核工业建筑安装企业（下称施工企业）质量保证大纲的要求，编制方法步骤，批准和发布，基本内容和构成及管理要求。 本标准适用于施工企业在承接建造核工程的合同条件下，编制《质保大纲》时使用，旨在使业主（或总包单位）确信施工企业能满足项目《质量保证总大纲》的要求。也适用于承接核工程以外工程时编制《质保大纲》使用，根据工程特点和要求可作适当剪裁。

Requirements for compiling quality assurance program of construction and installation enterprises in nuclear industry