F12 太阳能 标准查询与下载

NB/T 32011-2013 光伏发电站功率预测系统技术要求

本标准规定了光伏发电站功率预测系统的预测数据要求、预测系统软件要求、硬件要求和性能指标等技术要求。本标准适用于并网运行的光伏发电站。

Technical requirement of power forecasting system for PV power station

NB/T 32015-2013 分布式电源接入配电网技术规定

本标准规定了分布式电源接入电网运行应遵循的一般原则和技术要求。本标准适用于通过35kV及以下电压等级接入电网的新建、改建和扩建分布式电源。

Technical rule for distributed resources connected to distribution network

NF C57-316*NF EN 62716:2013 光伏(PV)模块.氨腐蚀测试

Photovoltaic (PV) modules - Ammonia corrosion testing

KS C IEC 60904-5:2013 光伏器件.第5部分:开路电压法测定光伏(PV)器件的等效电池温度(ECT)

이 표준은 태양전지 소자(셀, 모듈, 모듈형태의 어레이)의 등가 셀 온도(ECT)를 결정하기 위한 방법에 대해 규정한다. 이 등가 셀 온도(ECT)는 태양전지 소자의 열 특성을 비교하기 위한 목적 및NOCT(공칭 동작 셀 온도)와 측정된 I-V 특성을 다른 온도로 변환하기 위한 목적으로 활용하기 위한것이다.이 표준은 안정화된 조건하에서 조사강도에 따라 VOC 로그 의존성을 갖는 선형 소자에 적용한다. 이방법은 모든 기술에 적용할 수 있지만, 전처리 효과가 측정에 주는 영향이 없는지를 확인해야 한다.

Photovoltaic devices-Part 5:Determination of the equivalent cell temperature(ECT) of photovoltaic(PV) devices by the open-circuit voltage method

IEC 82/809/DTS:2013 IEC/TS 62108-9: 聚光光伏(CPV)模块和总成. 设计质量和型式批准. 第9部分: 重测指南

IEC/TS 62108-9: Concentrator Photovoltaic (CPV) modules and assemblies - Design qualification and type approval - Part 9: Retest guidelines

ISO 9806:2013 太阳能.太阳能集热器.试验方法

This International Standard specifies test methods for assessing the durability, reliability and safety for fluid heating collectors. This International Standard also includes test methods for the thermal performance characterization of fluid heating collectors, namely steady-state and quasi-dynamic thermal performance of glazed and unglazed liquid heating solar collectors and steady-state thermal performance of glazed and unglazed air heating solar collectors (open to ambient as well as closed loop).

Solar energy.Solar thermal collectors.Test methods

BS EN 62716:2013 光伏(PV)组件.氨腐蚀测试

Photovoltaic (PV) modules. Ammonia corrosion testing

JIS A 4111 AMD 1:2013 太阳能热水器(修改件1)

Solar water heater (Amendment 1)

JIS A 4113 AMD 1:2013 太阳能储热箱(修改件1)

Solar storage tanks (Amendment 1)

NF C61-739-11*NF EN 50539-11:2013 低压电涌保护装置. 直流等特殊应用电涌保护装置. 第11部分: 光伏应用中SPD的要求和试验

Low-voltage surge protective devices - Surge protective devices for specific application including d.c. - Part 11: requirements and tests for SPDs in photovoltaic applications

IEC 62670-1:2013 聚光光伏 (CPV)性能测试. 第1部分: 标准条件

This part of IEC 62670 defines standard conditions for assessing the power produced by CPV systems and their photovoltaic subcomponents. The object of this part of IEC 62670 is to define a consistent set of conditions so that power ratings noted on data sheets and nameplates will have a standard basis. Two sets of conditions are included to characterize: a) operating conditions that represent on-sun performance relative to commonly measured meteorological conditions@ and b) test conditions that represent performance when the module is in a readily reproducible environment.

Concentrator photovoltaic (CPV) performance testing - Part 1: Standard conditions

DIN EN 62109-1 Berichtigung 2:2013 光伏电力系统用电力转换器的安全性. 第1部分: 一般要求 (IEC 62109-1-2010); 德文版本EN 62109-1-2010, DIN EN 62109-1 (VDE 0126-14-1)-2011-04技术勘误

Safety of power converters for use in photovoltaic power systems - Part 1: General requirements (IEC 62109-1:2010); German version EN 62109-1:2010, Corrigendum to DIN EN 62109-1 (VDE 0126-14-1):2011-04

JJF 1261.11-2013 家用太阳能热水系统能源效率标识计量检测规则

本规则规定了贮热水箱容积在0.6 m以下的家用太阳能热水系统的能源效率标识计量要求、计量检测程序、计量检测方法、计量检测结果评定准则和检测报告等内容。本规则适用于贮热水箱容积在0.6 m以下的家用太阳能热水系统能源效率标识计量监督检测,委托检测可参考本规则进行。生产和销售家用太阳能热水系统的单位亦可参照本规则进行检测。接受检测的家用太阳能热水系统应是生产者自检合格的产品,或者是销售者进口、销售的商品。

Rules of Metrology Testing for Energy Efficiency Label of Domestic Solar Water Heating Systems

NF C57-111-1/A2:2013 光电(PV)组件安全性鉴定.第1部分:构造要求

Photovoltaic (PV) module safety qualification - Part 1: requirements for construction

NB/T 32004-2013 光伏发电并网逆变器技术规范

Photovoltaic power generation grid-connected inverter technical specification

JIS C 8939:2013 薄膜光伏(PV)组件

Thin film photovoltaic (PV) modules

JIS C 8918:2013 晶体光伏(PV)组件

Crystalline photovoltaic (PV) modules

IEC TS 62548:2013 光伏(PV)阵列设计要求

Design requirements for photovoltaic (PV) arrays

DB37/T 2329-2013 陶瓷中空太阳能集热板

本标准规定了陶瓷中空太阳能集热板的术语和定义、要求、试验方法、检验规则以及标志、包装、运输和贮存。 本标准适用于利用太阳辐射加热、传热工质为液体的陶瓷中空太阳能集热板。其它流体为传热工质时可参照执行。

Ceramic Hollow Solar Collector Plate

IEC 62716:2013 光伏 (PV) 组件. 氨气腐蚀试验

Scope and object Photovoltaic (PV) modules are electrical devices intended for continuous outdoor exposure during their lifetime. Highly corrosive wet atmospheres@ such as in the environment of stables of agricultural companies@ could eventually degrade some of the PV module components (corrosion of metallic parts@ deterioration of the properties of some non-metallic materials ?C such as protective coatings and plastics ?C by assimilation of ammonia) causing permanent damages that could impair their functioning and safe operation. This standard describes test sequences useful to determine the resistance of PV modules to ammonia (NH3). All tests included in the sequences@ except the bypass diode functionality test@ are fully described in IEC 61215@ IEC 61646 and IEC 61730-2. They are combined in this standard to provide means to evaluate possible faults caused in PV modules when operating under wet atmospheres having high concentration of dissolved ammonia (NH3). This standard applies to flat plate PV modules. The structure of this standard follows closely IEC 61701.

Photovoltaic (PV) modules - Ammonia corrosion testing