G13 氧化物、单质 标准查询与下载

KS M 8113-1996 亚硫酸钠(无水合物)(试剂)

이 규격은 시약용 아황산나트륨(무수)에 대하여 규정한다.

Sodium sulfite

KS M 8316-1996 乙酸锌(二水合物)(试剂)

이 규격은 시약용 아세트산아연 (2수화물)에 대하여 규정한다.

Zinc acetate dihydrate

NF T45-112:1996 橡胶配合材料.碳黑.着色强度的测定

Rubber compounding ingredients. Carbon black. Determination of tinting strength.

NF T45-027:1996 橡胶工业用原材料.亚磺酰胺型加速器.试验方法

Raw materials for the rubber industry. Sulfenamide type accelerators. Test methods.

ARMY MIL-S-14929 NOTICE 1-1996 (用于军火的)贸易级硫磺

This notice should be filed in front of MIL-S-l4929(AR), dated 30 August 1968

SULFUR: COMMERCIAL GRADE (FOR USE WITH AMMUNITION)

ARMY MIL-W-215 D NOTICE 1-1996 白磷(WP)

This commercial item description covers brown kraft paper used for general wrapping applications.

WHITE PHOSPHORUS (WP)

JIS K 0042:1996 二氧化碳的高准确度标准

この規格は，大気中などの二酸化炭素濃度を高精度に計測する計測器の目盛定め・目盛校正に用いる高圧ガス容器詰めの空気で希釈した高精度二酸化炭素標準ガスについて規定する。

High accuracy standards for carbon dioxide

HG/T 2765.2-1996 硅胶 粗孔硅胶

本标准规定了粗孔硅胶的要求、采样、试验方法、以及标志、包装、运输和贮存。 本标准适用于以硅胶酸钠和硫酸为原料制得的粗孔球形硅胶和粗孔块状硅有效 。粗孔球形硅胶主要用于气体净化剂、干燥剂及绝缘油的除酸剂等；粗孔块状硅胶主要用于催化剂载体、干燥剂、气体和液体净化剂等。 分子式 SiO|(2)·nH|(2)O

Silicone Coarse Pore Silicone

HG/T 2769-1996 软磁铁氧体用氧化镁

本标准规定了软磁铁氧体用氧化镁的要求、采样、试验方法以及标志、包装、运输和贮存。 本标准适用于由卤水法或含镁矿石法制得的软磁铁氧体用氧化镁。该产品主要用于电子行业制造偏转磁芯及其他镁锌铁氧体磁芯。 分子式：MgO 相对原子质量：40.30(按1991年国际相对原子质量)

Magnesium Oxide for Soft Ferrite

HG/T 2775-1996 工业三氧化二铬

本标准规定了工业三氧化二铬的要求、采样、试验方法以及标志、包装、运输、贮存。 本标准适用于热分解法、还原法制得的工业三氧化二铬（又名氧化铬绿）。该产品主要用于陶瓷、搪瓷、玻璃的着色剂，也用于制抛光膏、油漆、颜料和有机合成的铬催化剂等。

Industrial Chromium Trioxide

HG/T 2765.4-1996 硅胶 蓝胶指示剂和变色硅胶

Silicone Blue Gel Indicator and Color Changing Silicone

HG/T 2765.3-1996 硅胶 微球硅胶

本标准规定了微球硅胶的要求、采样、试验方法、以及标志、包装、运输和贮存。 本标准适用于以硫酸和硫酸钠为原料制得的微球和硅胶。微球硅胶主要用作催化剂载体及催化剂等。 分子式：SiO|(2)·nH|(2) O

Silica Microsphere Silica Gel

ASTM D5919-96(2001) 用ppb浓缩时吸附物的微缩等温线技术测定活性炭吸附能力的标准实施规程

1.1 This practice covers the assessment of activated carbon for the removal of low concentrations of adsorbable constituents from water and wastewater using the bottle point isotherm technique. It can be used to characterize the adsorptive properties of virgin and reactivated activated carbons. 1.2 This practice can be used in systems with constituent concentrations in the low milligrams per litre or micrograms per litre concentration ranges. 1.3 This practice can be used to determine the adsorptive capacity of and Freundlich constants for volatile organic compounds provided the handling procedures described in this practice are followed carefully. 1.4 The following safety caveat applies to the procedure section of this practice: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by a Micro-Isotherm Technique for Adsorbates at ppb Concentrations

ASTM D5919-96 用ppb浓缩时吸附物的微缩等温线技术测定活性炭吸附能力的标准实施规程

1.1 This practice covers the assessment of activated carbon for the removal of low concentrations of adsorbable constituents from water and wastewater using the bottle point isotherm technique. It can be used to characterize the adsorptive properties of virgin and reactivated activated carbons. 1.2 This practice can be used in systems with constituent concentrations in the low milligrams per litre or micrograms per litre concentration ranges. 1.3 This practice can be used to determine the adsorptive capacity of and Freundlich constants for volatile organic compounds provided the handling procedures described in this practice are followed carefully. 1.4 The following safety caveat applies to the procedure section of this practice: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by a Micro-Isotherm Technique for Adsorbates at ppb Concentrations

ASTM D5919-96(2006) 用ppb浓缩时吸附物的微缩等温线技术测定活性炭吸附能力的标准实施规程

This practice allows the adsorption capacity at equilibrium of an activated carbon for adsorbable constituents present in water to be determined. The Freundlich K and 1/n constants that can be calculated based upon information collected using this practice can be used to estimate carbon loading capacities and usages rates for the constituent present in a water stream at other concentrations. 1.1 This practice covers the assessment of activated carbon for the removal of low concentrations of adsorbable constituents from water and wastewater using the bottle point isotherm technique. It can be used to characterize the adsorptive properties of virgin and reactivated activated carbons. 1.2 This practice can be used in systems with constituent concentrations in the low milligrams per litre or micrograms per litre concentration ranges. 1.3 This practice can be used to determine the adsorptive capacity of and Freundlich constants for volatile organic compounds provided the handling procedures described in this practice are followed carefully.The following safety caveat applies to the procedure section of this practice: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by a Micro-Isotherm Technique for Adsorbates at ppb Concentrations

MT 427-1995 超氧化钾片状生氧剂技术条件

本标准规定了超氧化钾片状生氧剂的技术要求、试验方法、检验规则、包装、贮存和运输。 本标准适用子隔绝式化学氧自救器用的片状超氧化钾生氧剂(以下简称生氧剂)。

Potassium superoxide flake oxygen generator technical conditions

JIS K 1410:1995 氧化锌

この規格は，工業用の酸化亜鉛について規定する。

Zinc oxide

QB 2106-1995 电池用电解二氧化锰

本标准规定了电池用电解二氧化锰的产品分类、技术要求、试验方法、检验规则及标志、包装、运输、贮存。 本标准适用于以电解方法制得的工业二氧化锰．主要用于干电池工业。

Electrolytic Manganese Dioxide for Batteries

HG/T 2679-1995 工业重质氧化镁

本标准规定了工业重质氧化镁的技术要求、试验方法、检验规则以及标志、包装、运输、贮存。 本标准适用于由菱苦土锻烧制得的重质氧化镁。该产品主要用于化工、橡塑、粮食加工及建材等行业。 分子式：MgO 相对分子质量：40.03(按1991年国际相对原子质量)

Industrial Heavy Magnesium Oxide

JIS K 1477:1995 纤维状活性碳的试验方法

この規格は，繊維状活性炭() ()の試験方法について規定する。注()ここでいう繊維状活性炭は，炭素質からなる繊維状の吸着材である。例えば，有機繊維を加熱炭化，活性化して得られたものである。()繊維状活性炭は，活性炭繊維又は活性炭素繊維(Activated carbon fiber)とも呼ばれている。

Test methods for fibrous activated carbon