共找到 606 条与 有机化工原料综合 相关的标准,共 41 页
Determination of refractive index of technical quinoline
Method for Determination of Distillation Range of Industrial Quinoline
Determination of density of technical quinoline
Apparatus, procedure and correction and reporting of results.
Method for determination of distillation characteristics of organic liquids (other than petroleum products)
Ethylene for industrial use; determination of traces of polar compounds; preparation of condensate samples by low-temperature scrubbing technique
Light olefins for industrial use; determination of water; guidelines for use of in-line analysers
The volatile bases are distilled in alkaline medium under specified conditions and collected in a known volume of a standard volumetric hydrochloric acid solution in the presence of an indicator. The excess of the acid is titrated with a standard volumetric sodium hydroxide solution.
Caprolactam for industrial use; determination of volatile bases content; titrimetric method after distillation
Light olefins for industrial use; Determination of traces of chlorine; Wickbold combustion method
Light olefins for industrial use; Determination of molecular oxygen in gaseous phase; Electrochemical method with a membrane- covered cell
Describes the procedure and the precautions to be taken in drawing representative samples of ethylene in the liquid phase stored at -100 鳦 and in the gaseous phase, for the purpose of their analysis excluding the determination of water content, other polar components and hydrocarbons heavier than C. In an annex a diagrammatic representation is given of a system for the removal of the portion of the sample not used in the analysis.
Ethylene for industrial use; Sampling in the liquid and the gaseous phase
Butadiene for industrial use; Determination of oligomers; Gas chromatographic method
Butadiene for industrial use; Determination of active tert-butyl-catechol (TBC) (4-(1,1- dimethylethyl)-1,2-benzenediol); High performance liquid chromatographic method
This International Standard specifies a gas chromatogrphic method for the determination of oligomers in propylene(proprene)for industrial use. The method is applicable to propylene hacving propene dimers{hexenes}contents greater than 20mg/kg and propene dimers{hexenes}contents greater than 30mg/kg NOTE - Propylene dimers are the main part of the called "green oil"formed during partial hydrogenation to remove propadiene and propyne from propylene(about8%).Propylene dimers consist mainly of methylpentenes,2,3-dimethylbutenes(about 25%),hex-1-enes{about12%}and C6(about 20%).
Propylene for industrial use; Determination of oligomers; Gas chromatographic method
The method comprises the passage of a gaseous test portion through water to absorb acetone, acetonitrile, propan-2-ol and methanol, and subsequent gas chromatographic analysis of the aqueous solution, using a flame ionization detector, and comparison of the peaks obtained with those derived from an external standard. The method is applicable to products having acetone, propan-2-ol and methanol concentrations greater than 1 mg/kg, and acetonitrile concentrations greater than 10 mg/kg.
Ethylene and propylene for industrial use; Determination of acetone, acetonitrile, propan-2-ol and methanol; Gas chromatographic method
この規格は,ポリウレタンの原料に用いるポリメチレンポリフェニルポリイソシアネート(以下,ポリメリックMDIという。)の試験方法について規定する。
Testing methods for polymethylene polyphenyl polyisocyanate (testing methods for polymeric MDI)
The absorbance of a 50 % aqueous caprolactam solution is spectrometrically measured at a wavelength of 390 nm and an optical path length of 50 mm. The result is expressed in Hazen units by multiplying the absorbance measured by a constant factor equal to 150. This factor is derived from measurements of absorbance of diluted standard solutions of platinum-cobalt scale.
Caprolactam for industrial use; Determination of colour of 50 % aqueous caprolactam solution, expressed in Hazen units (platinum-cobalt scale); Spectrometric method
-3 présente norme décrit les méthodes d'essai pour doser l'élément toxique en Able concentration dans les revêtements protecteurs par analyse chimique ordinaire, par absorption atomique et par O spectrophotométrie dans le visible et l'ultraviolet.
Methods of Test for Toxic Trace Elements in Protective Coatings Reprint of 1975; Supersedes 1-GP-500
Volatile organic liquids for industrial use. Determination of distillation characteristics.
Phthalic and adipic esters for industrial use; Determination of free alcohols content; Spectrometric method
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号