G15 有机化工原料综合 标准查询与下载



共找到 606 条与 有机化工原料综合 相关的标准,共 41

Acetone for industrial use; Methods of test; Part 4 : Determination of permanganate time

ICS
71.080.80
CCS
G15
发布
1983-12
实施

本标准规定了沸点在30℃~300℃之间、在通常大气压下蒸馏过程中保持稳定的挥发性有机液体 (石油产品除外)蒸馏特性的测定方法及试验装置。 本标准适用于在30℃~300℃之间、在通常大气压下蒸馏过程中保持稳定的挥发性有机液体(石油 产品除外)蒸馏特性的测定。

Volatile organic liquids for industrial use; Determination of distillation characteristics

ICS
71.080.01
CCS
G15
发布
1983-12
实施

Gives general instructions and specifies methods of analysis for these chemical products. The methods are the following: determination of density at 20 ?C; determination of dry residue after evaporation on a water bath; measurement of colour; determination of distillation characteristics; determination of water content; determination of acidity; and determination of ester content (titrimetric method). - Cancels and replaces ISO Recommendation R 1386-1970 and constitutes a technical revision thereof.

Solvent acetates for industrial use; Methods of test

ICS
71.080.70
CCS
G15
发布
1983-11
实施

The method is applicable to products having high cresol contents. The principle consists in distillation of a test portion inder carefully defined conditions. Either determination of the temperatures corresponding to the condensate volumes defined or determination of the volume condensate when the thermometer indicates each of the distillaton temperatures (i.e. plotting temperature as a function of volume or plotting volume as a function of temperature).

Phenol, o-cresol, m-cresol, p-cresol, cresylic acid and xylenols for industrial use; Methods of test; Part 12 : Determination of distillation characteristics (Cresylic acid and xylenols only)

ICS
71.080.90;71.080.15
CCS
G15
发布
1983-11
实施

The test may be carried out on products as received or on a dried sample. The method specified in ISO 2208 shall be applied for drying. The principle of the method consists in cooling the liquid or liquefied test portion and observation of the temperature during crystallization under defined conditions. A simplified crystallization point apparatus is given in the figure. It takes into account the properties of these products.

Phenol, o-cresol, m-cresol, p-cresol, cresylic acid and xylenols for industrial use; Methods of test; Part 11 : Determination of crystallizing point (Excluding cresylic acid and xylenols)

ICS
71.080.90;71.080.15
CCS
G15
发布
1983-11
实施

Applicable to products having a high o-cresol content and a high m-cresol content. The principle consists in distillation of a tast portion under carefully defined conditions and determination of the mass of residue obtained. The distillation is carried out according to ISO 918. When all the water has distilled over, continue the distillation without intermediate measurements, until either the dry point or the final boiling point is reached.

Phenol, o-cresol, m-cresol, p-cresol, cresylic acid and xylenols for industrial use; Methods of test; Part 13 : Determination of residue on distillation (Cresylic acid and xylenols only)

ICS
71.080.90;71.080.15
CCS
G15
发布
1983-11
实施

Acetic acid for industrial use; Methods of test; Part 3 : Determination of formic acid content; Iodometric method

ICS
71.080.40
CCS
G15
发布
1983-10
实施

Chlorofluorinated hydrocarbons; Determination of water content; Gravimetric method

ICS
71.080.20
CCS
G15
发布
1983-02
实施

Volatile organic liquids for industrial use. Determination of dry residue after evaporation on a water bath-general method.

ICS
71.080.01
CCS
G15
发布
1982-12-01
实施
1982-12-17

The spectrometric measurement of the absorbance of a 50 % caprolactam water solution is carried out at a wavelength of 290 nm. The absorbance, expressed in relation to an optical path length of 1 m, is given by a specified formula in which A is the correction for the difference in absorbances of the cells; A is the absorbance of the test solution, and 1 is the optical path length, in centimetres, of the cell.

Caprolactam for industrial use; Determination of absorbance at a wavelength of 290 nm

ICS
71.080.30
CCS
G15
发布
1982-12
实施

Gives general instructions and specifies methods od analysis. The methods to be used are determination of density at 20 ?C, determination ofdry residue after evaporation on a water bath, measurement of colour, determination of distillation yield, determination of water content, detection of the alkalinity or acidity to phenolphthalein, spectrometric detection of content of carbonyl compounds in small amounts, titrimetric estimation of content of carbonyl compounds in moderate amounts, test for miscibility with water, determination of permanganate time and iodometric determination of methyl ketones. It results from the combination into one single document of draft International Standard ISO/DIS 1387 parts 1 to 7. Replaces ISO Recommendation R 1387-1970.

Methanol for industrial use; Methods of test

ICS
71.080.60
CCS
G15
发布
1982-12
实施

Acetic anhydride for industrial use; Methods of test

ICS
71.080.50
CCS
G15
发布
1982-12
实施

This method is applicable to products having a dry residue after evaporation, greater than or equal to 0, 005 % (m/m). The principleconsists in evaporation of a test portion in a platinum dish on a boiling water bath and drying of the residue in an oven at (105 +- 2) ?C for 1 h. Replaces ISO Recommendation R 1900-1971.

Phenol, o-cresol, m-cresol, p-cresol, cresylic acid and xylenols for industrial use; Methods of test; Part 10 : Determination of dry residue after evaporation on a water bath (Excluding cresylic acid and xylenols)

ICS
71.080.90;71.080.15
CCS
G15
发布
1982-12
实施

Caprolactam for industrial use; Determination of crystallizing point

ICS
71.080.30
CCS
G15
发布
1982-12
实施

Chlorofluorohydrocarbons for industrial use; Determination of inert gas content; Gas chromatographic method; General principles

ICS
71.080.20
CCS
G15
发布
1982-11
实施

Chlorofluorohydrocarbons for industrial use; Analysis by gas chromatography; General principles

ICS
71.080.20
CCS
G15
发布
1982-11
实施

Short pitch transmission precision bush chains and chain wheels; amendment 1

ICS
3575
CCS
G15
发布
1982-11
实施

Methyl chloride for industrial use; Determination of impurities; Gas chromatographic methods

ICS
71.080.20
CCS
G15
发布
1982-09
实施

Butadiene for industrial use; determination of tert-butyl-catechol (TBC) (4-(1,1-dimethyl-ethyl)-1,2 benzenediol); spectrometric method

ICS
71.080.10
CCS
G15
发布
1982-07
实施

Relates to C6 to C13 alcohols. The principle consists in distillation of a test portion, under carefull defined conditions. For measurement of distillation intervals not greater than 5 ?C, the thermometer hsall be graduated at intervals of 0, 2 ?C; for intervals greater than 5 ?C, the thermometer shall be graduated at intervals of 0, 5 ?C. Adjusting the rate of heating so that the first drop of distillate falls from the end of the condenser after 15 to 20 min. ISO 1843/7 cancels and replaces ISO Recommendation R 1845-1970, of which it constitutes a technical revision.

Higher alcohols for industrial use; Methods of test; Part 7 : Determination of distillation yield

ICS
71.080.60
CCS
G15
发布
1982-06
实施



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号