共找到 606 条与 有机化工原料综合 相关的标准,共 41 页
Determination of low-carbon fatty amine content by gas chromatography
Test methods for organic chemical products Part 12: Determination of trace amounts of mercury in organic liquid chemical products Atomic fluorescence method
Determination of adhesive force of optical functional film polyethylene terephthalate (PET) film protective film
Optical Functional Thin Film Microstructure Thickness Test Method
本文件规定了裸眼3D柱透镜光栅膜(以下简称“柱透镜光栅膜”)光学测量方法的术语和定义、测量条件、测量设置、测量内容和步骤、测试报告。 本文件适用于裸眼立体显示柱透镜光栅膜片的3D光学性能评价。
Lenticular lens film for autostereoscopic 3D display—Optical measurement method
本文件规定了使用原子荧光法测定液体化工产品中微量砷的方法。 本文件适用于烃、醇、酸等有机液体化工产品微量砷的测定。当称样量为1.0g、定容体积为50 mL时,本文件方法检出限为0.01 mg/kg。
Test method of organic chemical products—Part 11:Determination of trace arsenic in liquid products—Atomic fluorescence spectrometric method
本文件规定了用气相色谱法测定工业用丁二烯纯度及烃类杂质:乙烷、乙烯、丙烷、丙烯、乙炔、异丁烷、正丁烷、丙二烯、反2 -丁烯、异丁烯、1 -丁烯、顺2 -丁烯、异戊烷、正戊烷、丙炔、1 -丁炔、乙烯基乙炔和1,2
Determination of purity and hydrocarbon impurities of butadiene for industrial use—Gas chromatographic method
本文件规定了用气相色谱法测定工业用丁二烯中微量二聚物以及残留抽提剂的含量。 本文件适用于工业用丁二烯中微量4-乙烯基环己烯、1,
Determination of trace dimer and residual extraction agent of butadiene for industrial use—Gas chromatographic method
GB/I6324 的本部分规定了使用紫外效光法测定有机液体化工产品中总硫的方法。本部分适用于硫含量在0.2 mg/kg一100 mg/kg 的有机液体化工产品的测定本部分不适用于含氮.贞素、磷、硅的有机液体化工产品中硫的测定。 注:若产品中硫含量较低,而氮或卤素含量较高时,氮或贞素含量会对硫测定结果有影响。
Test method of organic chemical products—Part 10: Determination of trace sulfur in organic liquid products—Ultraviolet fluorescence method
本标准规定了用质谱仪进行物质定性分析与定量分析的一般方法。本标准适用于质谱的定性分析与定量分析。2 术语和定义
General rules for mass spectrometric analysis
General rules for sampling blend
General rules for infrared analysis
Optical functional films—Films for backlight unit of liquid crystal display—High temperature and high humidity aging measurement
Cellulose triacetate for optical function film
Optical functional films—Polyethylene terephthalate(PET) film—Determination of extraction rate
本标准规定了工业用硝化纤维素(以下简称硝化纤维素)含氮量、灰分、水分、湿润剂、黏度、透光率、白度、色度、酸度、安定性、发火点、酒樟溶解度、增塑剂含量、浊度14种测试方法的测试原理、试剂和材料、仪器设备、试验程序、试验结果处理、检测报告等内容。 本标准中的14种测试方法适用于涂料、油墨、赛璐珞、日用化工产品、环保产品、生物医药产品等用的硝化纤维素的测试,其中以下方法的用途特点为: a) 含氮量测试方法包括狄瓦尔德合金还原法、干涉仪法、近红外光谱法三种测试方法,狄瓦尔德合金还原法为仲裁法,干涉仪法为生产常用测试法,近红外光谱法为快速简便测试法; b) 水分测试方法包括卡尔?费休试剂法和近红外光谱法两种方法,卡尔?费休试剂法为仲裁测试法,近红外光谱法为快速简便测试法; c) 湿润剂测试方法包括烘箱法和卤素灯法两种方法,烘箱法为仲裁测试法,卤素灯法为快速简便测试法; d) 黏度测试方法包括落球黏度法和毛细管黏度法两种方法,落球黏度法适合常规黏度(黏度低于11.5 mPa ? s)硝化纤维素的测试,毛细管黏度法适合高黏度(黏度高于11.5 mPa ? s)硝化纤维素的测试; e) 透光率测试方法包括丙酮溶剂法和混合溶剂法两种方法,丙酮溶剂法适合低氮量(含氮量为10.7%~11.3%)高黏度硝化纤维素透光率的测试,混合溶剂法适合常规黏度硝化纤维素透光率的测试; f) 安定性测试方法包括贝克曼?荣克法和阿贝尔法两种方法,贝克曼?荣克法为132 ℃耐热测试法,阿贝尔为80 ℃耐热测试法。
Test methods of industrial nitrocellulose
Optical functional film—Cellulose triacetate(TAC) film—Determination of plasticizer content
Coking wastewater—Determination of ammonia nitrogen content—Formaldehyde method
Optical film for polarizer—Test method for the anti-scratch
本标准规定了光学功能薄膜聚对苯二甲酸乙二醇酯(PET)薄膜表面电阻的测定方法。 本标准适用于用高阻计测量法对光学功能PET薄膜表面电阻的测定。
Optical functional films—Polyethylene terephthalate(PET) film—Determination of surface resistance
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号