共找到 1232 条与 胶粘剂基础标准与通用方法 相关的标准,共 83 页
Adhesives -- Methods of preparing bulk specimens -- Part 2: Elevated-temperature-curing one-part systems
Adhesives -- Methods of preparing bulk specimens -- Part 1: Two-part systems
This European Standard specifies a method to determine the colour change of white or bright coloured leather surfaces caused by adhesives and/or their basic constituents migrating from the reverse sides to their upper surfaces. This change of colour may be caused either by the adhesive directly or by adhesive coatings on materials used in footwear manufacture, e.g. adhesive coated linings for ironing, toe-puffs, reinforcing tapes or bonded materials.
Adhesives for leather and footwear materials - Determination of colour change of white or bright coloured leather surfaces by migration; German version EN 12705:2011
Adhesives for thermoplastic piping systems - Part 2: Determination of shear strength
Structural adhesives - Testing of adhesively bonded joints - Preparation of samples for shear tensile tests from coil coated steel sheets
이 표준은 사용온도 70 ℃ 이하의 조건에서 단열을 목적으로 폴리스티렌을 발포시켜 성형한
Cellular polystyrene(PS) for thermal insulation
Structural adhesives - Corrosion - Part 1 : determination and classification of corrosion to a copper substrate.
Structural adhesives- Determination of shear behaviour of structural bonds - Part 1 : torsion test method using butt-bonded hollow cylinders.
Adhesives for leather and footwear materials - Determination of colour change of white or bright coloured leather surfaces by migration.
This European Standard specifies a method for the determination of the free formaldehyde content in amino and amido-formaldehyde condensate adhesives.
Adhesives - Determination of free formaldehyde in amino and amidoformaldehyde condensates; German version EN 1243:2011
This European Standard specifies a method for the determination of the softening point of hot-melt adhesives.
Adhesives - Determination of the softening point of thermoplastic adhesives (ring and ball); German version EN 1238:2011
This European Standard specifies a method for the determination by electrometry of the pH of adhesives, their basic constituents and related products using a pH meter equipped with a glass and silver reference combined electrode. This standard is applicable to products supplied in an aqueous medium, and of known concentration, and to products which can be dissolved, dispersed or suspended in water. It is not applicable to adhesives that react with water.
Adhesives - Determination of pH; German version EN 1245:2011
This International Standard specifies the performance requirements of wood bond lines in prefabricated structural timber components.
Timber structures - Bond performance of adhesives - Part 2: Additional requirements
This European Standard specifies a shear test for the characterization of adhesives in a bond. The shear stress/strain properties of the adhesive (including the shear modulus) are useful for advanced design work, e.g. in finite element analysis methods.
Structural adhesives - Determination of shear behaviour of structural bonds - Part 1: Torsion test method using butt-bonded hollow cylinders (ISO 11003-1:2001, modified); German version EN 14869-1:2011
This European Standard specifies a test method to determine the elastic behaviour of and elastomeric monocomponent liquid adhesive under specified conditions. This method is particularly suitable for production control.
Adhesives - Determination of elastic behaviour of liquid adhesives (elasticity index); German version EN 12962:2011
This European standard describes a method to determine the ability of an adhesive to corrode a brass substrate under the influence of an applied voltage and high humidity. The temperature, humidity, ageing period and applied voltage are chosen to ensure the maximum differentiation between the corrosivity of different adhesives and are not intended to represent any particular service condition.
Structural adhesives - Corrosion - Part 2: Determination and classification of corrosion to a brass substrate; German version EN 1965-2:2011
This European Standard specifies a method to determine the hydroxyl value and/or the hydroxyl content of adhesives, adhesive components, their basic constituents and related products. This method can also be used to determine the hydroxyl value and/or the hydroxyl content of surface protection systems of concrete.
Adhesives - Determination of hydroxyl value and/or hydroxyl content; German version EN 1240:2011
This European Standard specifies a method for the evaluation of the freeze-thaw stability of adhesives, their basic constituents and related products. This test has no significance if the sample does not freeze under the test conditions.
Adhesives - Freeze-thaw stability; German version EN 1239:2011
This European Standard specifies a test method for determining the shear behaviour of an adhesive in a single lap joint bonded assembly when subjected to a tensile force. The test is performed on specimens consisting of thick, rigid adherends, with a short length of overlap, in order to obtain the most uniform distribution of shear stresses possible and to minimize other stress states which initiate failure.
Structural adhesives - Determination of shear behaviour of structural bonds - Part 2: Thick adherends shear test (ISO 11003-2:2001, modified); German version EN 14869-2:2011
This European Standard specifies a shear test for the characterization of adhesives in a bond. The shear stress/strain properties of the adhesive (including the shear modulus) are useful for advanced design work, e.g. in finite element analysis methods.
Structural adhesives. Determination of shear behaviour of structural bonds. Torsion test method using butt-bonded hollow cylinders
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号