G38 胶粘剂基础标准与通用方法 标准查询与下载

KS M ISO 15605:2010 黏合剂.取样

이 표준은 시료를 채취하고자 하는 제품을 잘 대표하는 편리한 크기의 균일한 시료를 얻기 위

Adhesives-Sampling

KS M ISO 11343:2010 粘合剂.冲击条件下高强度胶粘剂耐动态劈裂的测定.楔形物冲击法

이 표준은 2개의 금속 피접착층 사이의 고강도 접합 부분에 충격 하중하에서의 균열 저항을

Adhesives－Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions－Wedge impact method

KS M ISO 17212:2010 结构胶黏剂.粘接前金属和塑料表面处理导则

이 표준은 시험실 평가나 조립 절차 이전에 구성물의 표면을 준비하는 데 이용되는 절차에 대

Structural adhesives-Guidelines for the surface preparation of metals and plastics prior to adhesive bonding

KS M 3871-1-2010 硬质泡沫塑料.喷雾式中密度聚氨酯泡沫.第1部分:规范

이 표준은 건축 현장이나 부품 생산 공장에서 건축용과 비건축용 단열재로 사용되는 분무식 중

Rigid cellular plastics－Spray polyurethane foam medium density－Part 1：Specification

BS ISO 25179:2010 粘合剂.水溶性或碱溶性压力敏感型粘合计的溶解度测定

Adhesives - Determination of the solubility of water-soluble or alkali-soluble pressure-sensitive adhesives

JIS A 5557 AMD 1:2010 瓷砖外部修饰加工用有机胶粘剂(修改件1)

Organic adhesives for exterior tile finishing (Amendment 1)

DIN EN 14294:2010 皮革和鞋靴材料用胶粘剂.通过制模工艺进行粘结试验件的制备.德文版本EN 14294-2010

Adhesives for leather and footwear materials - Preparation of bonded test pieces by moulding-on processes; German version EN 14294:2010

DIN EN 14022:2010 结构胶粘剂.多组分胶粘剂适用期(使用寿命)的测定.德文版本EN 14022-2010

Structural adhesives - Determination of the pot life (working life) of multicomponent adhesives; German version EN 14022:2010

DIN EN ISO 11339:2010 粘合剂.软材料和软材料粘接组件的T型剥离试验(ISO 11339-2010).德文版本EN ISO 11339-2010

This International Standard specifies a T-peel test for the deternination of the peel strength of an adhesive by measuring the peeling force of a T-shaped bonded assembly of two flexible adherends.

Adhesives - T-peel test for flexible-to-flexible bonded assemblies (ISO 11339:2010); German version EN ISO 11339:2010

DIN EN 1464:2010 粘合剂.粘结的抗剥离性测定.浮辊法.德文版本EN 1464-2010

Adhesives - Determination of peel resistance of adhesive bonds - Floating roller method; German version EN 1464:2010

BS EN ISO 11339:2010 粘合剂.挠性材料-挠性材料粘合组件的T-剥离试验

SAFETY STATEMENT — Persons using this document should be familiar with normal laboratory practice, if applicable. This document does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any regulatory conditions. It is recognized that some of the materials permitted in this document may have a negative environmental impact. As technological advances lead to more acceptable alternatives for such materials, they will be eliminated to the greatest extent possible. At the end of the test, care should be taken to dispose of all waste in an appropriate manner in accordance with local regulations. This International Standard specifies a T-peel test for the determination of the peel strength of an adhesive by measuring the peeling force of a T-shaped bonded assembly of two flexible adherends. This test procedure does not provide design information.

Adhesives - T-peel test for flexible-to-flexible bonded assemblies

BS EN 1464:2010 粘合剂.粘合剂抗剥离强度的测定.浮辊法

This European Standard specifies a floating roller method for the determination of the peel resistance of adhesive bonds between one rigid adherend and one flexible adherend when tested under specified conditions of preparation and testing. NOTE The use the floating roller produces more constant numerical data than other peel methods, but it should not be expected that the flexible adherend will conform to the surface of the roller. SAFETY STATEMENT— Persons using this document should be familiar with the normal laboratory practice, if applicable. This document does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any regulatory conditions. ENVIRONMENTAL STATEMENT — It is understood that some of the material permitted in this standard may have negative environmental impact. As technological advantages lead to acceptable alternatives for these materials, they will be eliminated from this standard to the extent possible. At the end of the test, the user of the standard should take care to carry out an appropriate disposal of the wastes, according to local regulation.

Adhesives - Determination of peel resistance of adhesive bonds - Floating roller method

NF T76-158:2010 粘合剂.挠性粘合组件的T-剥离试验.

Adhesives - T-peel test for flexible-to-flexible bonded assemblies.

DIN EN 13415:2010 地板覆盖物用粘合剂的试验.粘合剂薄膜和合成物的电阻用测定

This European standard specifies a test method to measure the electrical resistance of an adhesive film without contact to floor coverings. The electrical resistance is reciprocal to the electrical conductivity.

Test of adhesive for floor covering - Determination of the electrical resistance of adhesive films and composites; German version EN 13415:2010

BS EN 14294:2010 皮革和鞋类材料用粘合剂.由模压工序粘合试件的制备

This European Standard specifies procedures for the preparation of test pieces comprising adhesive coated leather or other footwear upper material onto which a soling material is moulded directly. The procedures described simulate direct vulcanising of rubber, injection moulding of thermoplastics and reaction moulding of polyurethane. The prepared test pieces are suitable for the test procedures described in EN 1392, to meet the requirements of EN 15307. SAFETY STATEMENT— Persons using this document should be familiar with the normal laboratory practice, if applicable. This document does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any regulatory conditions. ENVIRONMENTAL STATEMENT— It is understood that some of the material permitted in this standard may have negative environmental impact. As technological advantages lead to acceptable alternatives for these materials, they will be eliminated from this standard to the extent possible. At the end of the test, the user of the standard should take care to carry out an appropriate disposal of the wastes, according to local regulation.

Adhesives for leather and footwear materials - Preparation of bonded test pieces by moulding-on processes

BS EN 14022:2010 结构胶粘剂.多组分胶粘剂适用期(工作寿命)的测定

This European Standard specifies means of determining in appropriate ways the variable property known alternatively as useable working life and pot life. This European Standard specifies five methods for the determination of the time available for use, each of which is related to specific circumstances; particularly important being the rheology of the adhesive concerned and its rate of reaction. This European Standard can also be used for assessing non-structural adhesives. Because of the different properties of the individual multi-component systems, like rheology or viscosity, respectively velocity of hardening, etc., not all methods can be applied to each multi-component system with the same suitability. SAFETY STATEMENT— Persons using this document should be familiar with the normal laboratory practice, if applicable. This document does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any regulatory conditions. ENVIRONMENTAL STATEMENT — It is understood that some of the material permitted in this standard may have negative environmental impact. As technological advantages lead to acceptable alternatives for these materials, they will be eliminated from this standard to the extent possible. At the end of the test, the user of the standard should take care to carry out an appropriate disposal of the wastes, according to local regulation.

Structural adhesives - Determination of the pot life (working life) of multicomponent adhesives

NF T76-339:2010 粘合剂.水溶性或碱溶性压敏粘合剂溶解度的测定

Adhesives - Determination of the solubility of water-soluble or alkali-soluble pressure-sensitive adhesives.

NF T76-336-3:2010 承重木结构用胶粘剂(酚醛树脂和氨基塑料除外).试验方法.第3部分:循环气候条件下加载弯曲剪切的样品蠕变变形试验

Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 3 : creep deformation test at cyclic climate conditions with specimens loaded in bending shear.

NF T76-336-3/IN1:2010 承重木结构用胶粘剂(酚醛树脂和氨基塑料除外).试验方法.第3部分:循环气候条件下加载弯曲剪切的样品蠕变变形试验

Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 3 : creep deformation test at cyclic climate conditions with specimens loaded in bending shear.

NF T76-147:2010 结构胶粘剂.多元胶粘剂的寿命(使用寿命)测定

Structural Adhesives - Determination of the pot life (working life) of multi-component adhesives.