G40 橡胶制品综合 标准查询与下载

ASTM D6324-11(2017) 聚氨酯制成男性避孕套的标准规格

A2.2 Significance and Use A2.2.1 Tensile properties determined by this test method are of value for the identification and characterization of materials for control and specification purposes. 1.1 This specification covers the minimum requirements for individually packaged male condoms made from polyurethane. This specification also describes the minimum inspection and quality levels that shall be utilized in referee tests. It is not intended to be a routine quality control specification for polyurethane condom manufacturing operations. 1.2 This specification is intended to assist buyers in obtaining male polyurethane condoms of consistent quality. The safe and proper use of male polyurethane condoms is excluded from the scope of these test methods. 1.3 The annexes in these test methods include important information, such as that on apparatus or materials, that are a mandatory part of these test methods but too detailed for inclusion in the main text. 1.4 The appendixes in these test methods contain information intended to provide guidance. 1.5 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.6 It shall be the responsibility of the manufacturer for any condom design that falls outside the specifications of this standard to determine testing methodology and substantiate the appropriateness of that methodology to assure the quality of the condoms to the purchaser and to the government regulatory authority having jurisdiction. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Male Condoms Made from Polyurethane

KS M 2964-2010 汽车柴油和生物柴油燃料油中脂肪酸甲基酯的试验方法.高效液相色谱法(HPLC)

이 표준은 고성능 액체크로마토그래피를 이용하여 자동차용 경유 및 바이오디젤 연료유의 지방산

Test method for determination of fatty acid methyl ester(FAME) in automotive diesel and biodiesel blends by high performance liquid chromatography(HPLC)

KS M 6956-2010 再生橡胶粉有害物质的测量方法

이 표준은 재활용 고무 분말 중에 함유된 중금속 등의 유해화학물질 측정방법을 명시한다. 이

Test method for estimating the toxicity of recycled rubber powder

KS M 6961-2010 飞机轮胎

이 표준은 항공기에 사용하는 신품 타이어(이하 타이어라 한다.)에 대해서 규정한다. 다만

Tires for aircraft

KS M ISO 4645:2010 橡胶和橡胶制品.抗降解剂鉴别指南.薄层色谱法

이 표준은 천연고무, 미가황 고무 및 고무제품에 존재하는 노화방지제(산화 방지제, 오존화

Rubber and rubber products-Guide to the identification of antidegradants-Thin layer chromatographic methods

KS M 3031-2010 聚乙烯炭黑含量测定法

이 표준은 폴리에틸렌, 폴리프로필렌 및 폴리부틸렌 수지에 들어 있는 카본 블랙의 함량을 측

Test method for determination of carbon black contents in polyolefin resin

KS M 3028-2010 聚乙烯醇缩甲醛试验方法

이 표준은 아세탈화도 약 70몰% 이상의 폴리비닐 포르말 시험방법에 대하여 규정한다.

Testing methods for polyvinyl formal

BS ISO 11089:2010 未加工的合成橡胶.利用高效液相色谱法进行抗降解剂测定

Rubber, raw synthetic - Determination of antidegradants by high-performance liquid chromatography

KS M ISO 18898:2010 橡胶.硬度测定仪校准和检验

이 표준은 듀로미터 A, D, AO 및 AM형(KS M ISO 7619-1 참조), IRH

Rubber-Calibration and verification of hardness testers

KS M ISO 7267-1:2010 橡胶包覆滚柱.表观硬度的测定.第1部分:国际橡胶硬度标度(IRHD)法

이 표준은 국제 고무 경도 등급(IRHD)으로 표시되는 가황 또는 열가소성 고무 피복 롤러

Rubber-covered rollers－Determination of apparent hardness－Part 1：IRHD method

KS M ISO 7267-2:2010 橡胶涂覆滚柱.表面硬度的测定.第2部分:肖氏硬度计法

이 표준은 쇼어 경도로 표시되는 가황 또는 열가소성 고무 피복 롤러의 겉보기 경도를 측정하

Rubber-covered rollers－Determination of apparent hardness－Part 2：Shore-type durometer method

KS M ISO 19003:2010 橡胶和橡胶制品.统计物理测试应用指南

이 표준은 고무 시험에 대한 통계적 적용 지침을 제공한다. 이 표준은 이미 다른 표준에 있

Rubber and rubber products-Guidance on the application of statistics to physical testing

JIS K 6353 AMD 3:2010 给水装置用橡胶制品(修改件3)

Rubber goods for water works (Amendment 3)

ISO 4662:2009/cor 1:2010 硫化橡胶和热塑性橡胶.回弹性的测定.技术勘误1

Technical Corrigendum 1 to ISO 4662:2009 was prepared by Technical Committee ISO/TC 45, Rubber and rubber products, Subcommittee SC 2, Testing and analysis.

Rubber, vulcanized or thermoplastic - Determination of rebound resilience; Technical Corrigendum 1

ISO/TR 12134:2010 橡胶.试验方法用不确定性的评价.非功能参数

This Technical Report provides guidance to scientists, engineers and technicians, working in the field of rubber materials and products, to supplement ISO/IEC Guide 98-3 and to provide additional guidance in situations where functional relationships between input quantities (such as temperature, strain rate and time) and derived output quantities (such as tensile strength and compression set) are unknown and where no other guidance is available. This Technical Report provides a summary of the classical approach that is taken in the preparation of uncertainty budgets and provides in Clause 4 a list of selected test methods and, for each, an indication of the factors that will make a contribution to the uncertainty budget. Clause 5 discusses how “non-functional” factors can be taken into account in the classical approach.

Rubber - Estimation of uncertainty for test methods - Non-functional parameters

ASTM D5712-10 改良Lowry法测定天然橡胶及其制品中的可水抽提蛋白质的标准试验方法

This test method, for the determination of protein levels in NR, is primarily intended to test NR materials for residual protein content. It is assumed that all who use this test method will be trained analysts capable of performing common laboratory procedures skillfully and safely. It is expected that work will be performed in a properly equipped laboratory.

Standard Test Method for Analysis of Aqueous Extractable Protein in Natural Rubber and Its Products Using the Modified Lowry Method

ASTM F1344-10 橡胶地面砖的标准规范

1.1 This specification covers requirements for the compound and physical characteristics of rubber floor tile. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Rubber Floor Tile

ASTM F1860-10 有背面橡胶板铺地材料标准规范

1.1 This specification covers the requirements for the compound and physical characteristics of rubber sheet floor covering having a rubber wear layer with backing. Products may also contain intermediate layers. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 The following precautionary statement pertains only to the test method portion, Section 10, of this specification: This standard does not purport to address all the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Rubber Sheet Floor Covering With Backing

ASTM F1859-10 无背面橡胶板铺地材料标准规范

1.1 This specification covers the requirements for the compound and physical characteristics of rubber sheet floor covering without backing. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 The following precautionary statement pertains only to the test method portion, Section 10, of this specification: This standard does not purport to address all the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Rubber Sheet Floor Covering Without Backing

ASTM D378-10 平型橡胶(人造橡胶)传送带的标准试验方法

Flat conveyor belts are used in many industrial applications in which they are subjected to a great variety of stresses and conditions. Service conditions can be calculated or measured. Design levels and test requirements are established by manufacturers, or end-users, or both. The tests (test methods) are used to measure the characteristics of conveyor belting as they relate to service conditions. The tests outlined by these test methods are commonly applied by belt manufacturers to control the quality of their products. Research and product development activities in flat belting involve extensive testing as outlined by these test methods. In case of conflict between the provisions of these test methods and those of detailed specifications or test methods for a particular belt, the latter shall take precedence. In case of conflict between the provisions of these test methods and those of detailed specifications or test methods for a particular belt, the latter shall take precedence.1.1 These test methods (and references) cover the procedures for evaluating the physical properties of flat conveyor belting. Performance criteria for belting will not be detailed here, but can be found through the RMA (Rubber Manufacturers Association) Conveyor and Elevator Belt Handbook, ANSI (American National Standards Institute), various governmental authorities, and the International Organization for Standardization (ISO). Belting for conveying and elevating materials generally is designated and defined as follows: 1.1.1 Heavy Duty Conveyor8212;A heavy duty belt is defined as belting designed for bulk haulage of materials, such as stone, crushed rock, sand, metals ores, coal, wood chips, etc., and has a carcass strength (design) substantial enough to withstand conveyor system tensions of 160 PIW (pounds per inch of width) and above. 1.1.2 Light Duty Conveyor8212;A light duty belt is defined as belting designed for conveying a variety of lower weight (density) materials, packages, industrial and electronic goods, and food products. These belts often are shorter in length and width, with less overall thickness than heavy duty belting, and are generally used in conveyor systems with tensions less than 160 PIW. 1.1.3 General Description8212;Belting can have elastomeric coverings on one side, both sides, or neither side depending upon the specific application requirements. Belt coverings are comprised of various synthetic or natural rubber polymers, PVC, or other elastomeric materials, dependent upon application or customer requirements. The strength (load bearing) member(s) of most belting generally is a woven or interwoven carcass of synthetic or natural fibers, such as, but not limited to, polyester, nylon, polyaramide and cotton, as well as steel (cable/cord type or woven mesh). 1.2 This standard does not purport to address all of the application specific testing available or safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Methods for Rubber (Elastomeric) Conveyor Belting, Flat Type