共找到 1146 条与 胶管、胶带、胶布 相关的标准,共 77 页
Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems. Specification
This International Standard specifies minimum requirements for three types of hoses in two categories and two classes of hose assemblies used for measured fuel dispensing, including oxygenated fuels (up to a maximum of 15 % oxygenated compounds). The assemblies are intended for use at ambient temperatures between −30 °C and +55 °C for normal temperature class and −40 °C and +55 °C for low temperature class at a working pressure up to and including 16 bar (1,6 MPa). NOTE 1 bar = 0,1 MPa.
Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems - Specification
本标准规定了钢丝绳牵引阻燃输送带(以下简称带)的结构与标记,技术要求,检验,标志、包装、贮存和运输。 本标准适用于要求阻燃、抗静电场合加以钢丝绳承托并牵引的输送带。
Steel cord pull flame retardant conveyor belts
本标准规定了耐酸碱输送带(以下简称带)的分类,要求,试验方法,检验规则,标志、包装、贮存和运输。 本标准适用于输送具有酸性或碱性的块状、粒状、粉状或成件物品的织物芯耐酸碱输送带。
Acid-alkaline resistant conveyor belts
Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification
Rubber hoses and hose assemblies. Rubber-covered spiral wire reinforced hydraulic type. Specification
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification; German version EN 13765:2010+A1:2015
Rubber hoses and hose assemblies. Textile reinforced hydraulic type. Specification
Rubber hoses and hose assemblies. Wire braid reinforced compact type for hydraulic applications. Specification
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification
Le présent document corrige la Figure C.2 qui illustre un exemple de montage d'essai de traction.
Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications - Specification - Amendment 1
Measuring compression set of elastomers in hot water
Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications - Specification; Amendment 1
Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications - Specification - Amendment 1 (ISO 28017:2011/Amd 1:2015)
Conveyor belts. Conditions of testing and conditioning
Light conveyor belts. Determination of the maximum tensile strength
本标准规定了普通用途抗撕裂钢丝绳芯输送带(以下简称“抗撕裂带”或“带”)的产品分类,技术要求,试验方法,检验规则,标志、包装、运输和贮存。 本标准适用于工作温度为-20 ℃~+45 ℃的抗撕裂带。 本标准不适用于耐油、耐热、耐酸碱、难燃、食品输送等特殊用途的输送带。
Tear resistant steel cord conveyor belt for general use
本标准规定了耐油输送带(以下简称“带”)的标记,要求,检验,标志、包装、运输和贮存。 本标准适用于耐油的织物芯输送带(包括包边式和切边式)。
Oil resistant conveyor belt
本标准规定了轻型平型传动带和片基厚度不超过0.5 mm的聚酰胺片基平带(以下简称平带)及多楔带(PK型)的摩擦系数测试方法。 本标准适用于在规定条件下测定平带和多楔带(PK型)的摩擦系数。
Test method of friction factor for drive belts
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号