G42 胶管、胶带、胶布 标准查询与下载

NF T47-203-1:2012 橡胶、塑料软管和管材.曲挠性和刚性的测量.第1部分:环境温度下的弯曲试验

Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1 : bending tests at ambient temperature.

DIN EN ISO 10619-3:2012 橡胶和塑料软管和管材.曲挠性和刚性的测量.第3部分:高温和低温下的弯曲试验(ISO 10619-3-2011).德文版本 EN ISO 10619-3-2011

Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures (ISO 10619-3:2011); German version EN ISO 10619-3:2011

DIN EN ISO 10619-1:2012 橡胶和塑料软管和管材.曲挠性和刚性的测量.第1部分:在环境温度下的弯曲试验(ISO 10619-1-2011).德文版本 EN ISO 10619-1-2011

Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1: Bending tests at ambient temperature (ISO 10619-1:2011); German version EN ISO 10619-1:2011

DIN EN ISO 10619-2:2012 橡胶和塑料软管和管材.曲挠性和刚性的测量.第2部分:低于环境温度的弯曲试验(ISO 10619-2-2011).德文版本 EN ISO 10619-2-2011

Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures (ISO 10619-2:2011); German version EN ISO 10619-2:2011

DIN EN ISO 28017:2012 疏浚用钢丝或织物增强的橡胶软管及软管组合件.规范(ISO 28017-2011).德文版本EN ISO 28017-2011

Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications - Specification (ISO 28017:2011); German version EN ISO 28017:2011

DIN EN ISO 30013:2012 橡胶和塑料软管.实验室光源曝射法.测定颜色,外观及其它物理属性的变化(ISO 30013-2011).德文版本 EN ISO 30013-2011

Rubber and plastics hoses - Methods of exposure to laboratory light sources - Determination of changes in colour, appearance and other physical properties (ISO 30013:2011); German version EN ISO 30013:2011

DIN EN ISO 4671:2012 橡胶和塑料软管及软管组件.软管尺寸和软管组件长度的测量方法

Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies (ISO 4671:2007 + Amd 1:2011); German version EN ISO 4671:2007 + A1:2011

NF T47-285:2012 疏浚用钢丝或织物增强的橡胶软管及软管组合件.规范

Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications - Specification.

ASTM F1344-12e1 橡胶地板砖的标准规范

1.1 This specification covers requirements for the compound and physical characteristics of rubber floor tile. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Rubber Floor Tile

ASTM F1860-12 有背衬的橡胶薄板地板覆盖物的标准规范

1.1 This specification covers the requirements for the compound and physical characteristics of rubber sheet floor covering having a rubber wear layer with backing. Products may also contain intermediate layers. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 The following precautionary statement pertains only to the test method portion, Section 10, of this specification: This standard does not purport to address all the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Rubber Sheet Floor Covering With Backing

ANSI/ASTM E2226:2012 管流中的应用操作规程

Practice for Application of Hose Stream

ASTM F1344-12 橡胶地板砖的标准规范

1.1 This specification covers requirements for the compound and physical characteristics of rubber floor tile. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Rubber Floor Tile

ASTM F1859-12 没有背衬的橡胶薄板地板覆盖物的标准规范

1.1 This specification covers the requirements for the compound and physical characteristics of rubber sheet floor covering without backing. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 The following precautionary statement pertains only to the test method portion, Section 10, of this specification: This standard does not purport to address all the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Rubber Sheet Floor Covering Without Backing

BS EN ISO 28017:2011 清淤应用橡胶管和软组件,线材和织物加固.规范

Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications. Specification

BS ISO 10619-3:2011 橡胶或塑料软管和管件.曲挠性和刚性的测量.高温和低温弯曲试验

Rubber and plastics hoses and tubing. Measurement of flexibility and stiffness. Bending tests at high and low temperatures

HG/T 3745-2011 联组普通V带

本标准规定了联组普通V带的产品结构、型号和标记、截面尺寸、要求、试验方法、检验规则及标志、标签、包装、运输和贮存。 本标准适用于一般的动力传动用联组普通V带。

Joined classical V-belts

HG/T 4224-2011 钢丝绳芯管状输送带

本标准规定了具有橡胶覆盖层的钢丝绳芯管状输送带(以下简称“带”)的产品分类、技术要求、试验方法、检验规则、标志、包装、贮存与运输。　　 本标准适用于工作环境为-20℃～40℃的钢丝绳芯管状输送带。　　 本标准不适用于成槽输送物料的输送带。

Pipe conveyor belts of steel cord construction

HG/T 3035-2011 吸水和排水用橡胶软管及软管组合件.规范

本标准规定了织物增强且内壁光滑的吸、排水用橡胶软管及软管组合件的最低要求。 本标准适用于软管使用环境温度为-25℃～＋70℃输送水温0℃～＋70℃范围内的，三种型别的软管和软管组合件。

Rubber hoses and hose assemblies for water suction and discharge.Specification

HG/T 2300-2011 塑料软管.普通用途织物增强可折叠式输水软管.规范

本标准规定了四种型别的普通用途织物增强热塑性可折叠输水软管的要求，其使用温度范围为-10℃～55℃。 此类软管分为一下四个型别： —低压，设计用于最高工作压力：当23℃以下最大0.4MPa，当55℃以下最大0.2MPa； —中压，设计用于最高工作压力：当23℃以下最大0.7MPa，当55℃以下最大0.36MPa； —高压，设计用于最高工作压力：当23℃以下最大1.0MPa，当55℃以下最大0.51MPa； —超高压，设计用于最高工作压力：当23℃以下最大1.55MPa，当55℃以下最大0.70MPa。 本标准不适用于消防软管或输送饮用水用软管。

Plastic hose.General-purpose collapsible water hose, textile-reinforced.Specification

HG/T 3046-2011 织物芯输送带外观质量规定

本标准规定了织物芯输送带（以下简称带）的外观质量要求，还规定了外观缺陷测量方法。 本标准适用于织物芯橡胶输送带，不适用于花纹输送带、金属骨架输送带、全塑料覆盖层输送带和整体带芯难燃输送带。

Conveyor belts with a textile carcass.Specification for appearance quality