G42 胶管、胶带、胶布 标准查询与下载

ISO 4080:2009 橡胶和塑料软管和软管组件.漏气率测定

Rubber and plastics hoses and hose assemblies - Determination of permeability to gas

BS EN ISO 1402:2009 橡胶和塑料软管及软管组件.液压静力试验

This International Standard specifies methods for the hydrostatic testing of rubber and plastics hoses and hose assemblies, including methods for the determination of dimensional stability.

Rubber and plastics hoses and hose assemblies - Hydrostatic testing

BS EN ISO 8031:2009 橡胶和塑料软管和软管组件.电阻率和电导率的测定

Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity

JIS Z 1902:2009 防腐矿酯胶带

This Standard specifies the petrolatum tapes which, through trference in this text, constitute provisions of this Standard.The most recent editions of the standards (including amendments)indicated below shall be applied.

Petrolatum tapes for corrosion protection

ISO 4023:2009 蒸气用胶管和软组件.试验方法

Rubber hoses and hose assemblies for steam - Test methods

KS M ISO 8789:2009 摩托车中输送液化石油气用橡胶软管和软管组件规范

이 표준은 액화 석유 가스(LPG) 자동차에 사용 또는 구경이 20 mm 이하의 고무 호스

Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles-Specification

ISO 8031:2009 橡胶和塑料软管和软管组件.电阻率和电导率的测定

Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity

DIN EN ISO 5771:2009 输送无水氨用橡胶软管及软管总成.规范(ISO 5771:2008),DIN EN ISO 5771:2009-10的英文版本

This International Standard specifies the minimum requirements for rubber hoses used for transferring ammonia, in liquid or in gaseous form, at ambient temperatures from 40 ℃ up to and including +55 ℃. It does not include specifications for end fittings, but is limited to the performance of the hoses and hose assemblies.

Rubber hoses and hose assemblies for transferring anhydrous ammonia - Specification (ISO 5771:2008); English version of DIN EN ISO 5771:2009-10

ISO 1402:2009 橡胶和塑料软管和软管组合件.液压试验方法

Rubber and plastics hoses and hose assemblies - Hydrostatic testing

KS M ISO 6446:2009 橡胶制品.桥承支架.橡胶材料规范

이 표준은 평평한 패드나 적층 형태로 탄성체 교량 받침에 사용되는 고무 재료에 대한 요구

Rubber products－Bridge bearings－Specification for rubber materials

ISO 28017:2009 疏浚用钢丝或织物增强的橡胶软管及软管组合件.规范

Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications - Specification

BS ISO 1436:2009 橡胶软管和软管组件.油质或水质流体用金属丝编织增强液压型管.规范

Rubber hoses and hose assemblies - Wire-braid-reinforced hydraulic types for oil-based or water-based fluids - Specification

BS ISO 4079:2009 橡胶软管和软管组件.油质或水质流体用织物增强液压型管.规范

Rubber hoses and hose assemblies - Textile-reinforced hydraulic types for oil-based or water-based fluids - Specification

NF E48-087:2009 钢丝增强橡胶和塑料软管及组件.挠性液压脉冲试验

Rubber and plastics hoses and hose assemblies with wire reinforcements - Hydraulic impulse test with flexing.

NF T47-253:2009 一般用途的输水用织物增强橡胶软管.规范

Rubber hoses, textile-reinforced, for general-purpose water applications - Specification.

NF T47-276:2009 喷沙和喷粒处理用橡胶软管.规范

Rubber hoses for sand and grit blasting - Specification.

ISO 1436:2009 橡胶软管和软管组件.油基或水基液体用金属丝编织增强液压型.规范

This International Standard specifies requirements for six types of wire-braid-reinforced hose and hose assembly of nominal size from 5 to 51 plus, for one of the five types (type R2ATS), nominal size 63. They are suitable for use with water-based hydraulic fluids HFC, HFAE, HFAS and HFB as defined in ISO 6743-4 at temperatures ranging from to −40 °C to +60 °C or oil-based hydraulic fluids HH, HL, HM, HR and HV as defined in ISO 6743-4 at temperatures ranging from −40 °C to +100 °C. This International Standard does not include requirements for end fittings. It is limited to requirements for hoses and hose assemblies. NOTE It is the responsibility of the user, in consultation with the hose manufacturer, to establish the compatibility of the hose with the fluid to be used.

Rubber hoses and hose assemblies - Wire-braid-reinforced hydraulic types for oil-based or water-based fluids - Specification

ISO 4079:2009 橡胶软管和软管组件.油基或水基流体用织物增强液压型.规范

This International Standard specifies requirements for five types of textile-reinforced hydraulic hose and hose assembly of nominal size from 5 to 100. They are suitable for use with water-based hydraulic fluids HFC, HFAE, HFAS and HFB as defined in ISO 6743-4 at temperatures ranging from −40 °C to +60 ºC or oil-based hydraulic fluids HH, HL, HM, HR and HV as defined in ISO 6743-4 at temperatures ranging from −40 °C to +100 °C. This International Standard does not include requirements for end fittings. It is limited to requirements for hoses and hose assemblies. NOTE It is the responsibility of the user, in consultation with the hose manufacturer, to establish compatibility of the hose with the fluid to be used.

Rubber hoses and hose assemblies - Textile-reinforced hydraulic types for oil-based or water-based fluids - Specification

ISO 3862:2009 橡胶软管和软管组件.油基或水基流体用橡胶包皮螺旋钢丝增强液压型.规范

This International Standard specifies requirements for five types of spiral-wire-reinforced hydraulic hose and hose assembly of nominal size from 6,3 to 51. They are suitable for use with water-based hydraulic fluids HFC, HFAE, HFAS and HFB as defined in ISO 6743-4 at temperatures ranging from −40 °C to +60 °C and oil-based hydraulic fluids HH, HL, HM, HR and HV as defined in ISO 6743-4 at temperatures ranging from −40 °C to +100 °C for types 4SP and 4SH and −40 °C to +120 °C for types R12, R13 and R15. NOTE 1 This temperature rating is related to the water-based hydraulic fluids defined in ISO 6743-4. This International Standard does not include requirements for end fittings. It is limited to requirements for hoses and hose assemblies. NOTE 2 It is the responsibility of the user, in consultation with the hose manufacturer, to establish the compatibility of the hose with the fluid to be used.

Rubber hoses and hose assemblies - Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids - Specification

KS M ISO 4641:2009 吸水和排水用橡胶软管规范

이 표준은 섬유로 보강되어 있고 매끄러운 구멍을 가지는 물 흡입 및 배수용 고무 호스와 호

Rubber hoses and hose assemblies for water suction and discharge-Specification