G47 其他橡胶制品 标准查询与下载

HG/T 3501-2003 橡胶涂覆织物 气床垫

Rubber coated fabric air mattress

ASTM F2320-03 橡胶绝缘薄板材的标准规范

1.1 This specification covers testing of rubber insulating sheeting for use as a covering for the protection of workers from accidental contact with live electrical conductors, apparatus, or circuits.1.2 Two types of sheeting, differing in chemical and physical characteristics, are provided and are designated as Type I, non-resistant to ozone and Type II, resistant to ozone.1.3 Six classes of sheeting, differing in electrical protection characteristics are provided and designated as Class 00, Class 0, Class 1, Class 2, Class 3, Class 4.1.4 Two styles of sheeting, differing in construction characteristics, are provided and are designated as Style A and Style B.1.5 The follow safety hazards caveat applies only to the test method portion, Sections 17-19, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.Note 18212;Rubber Insulating Sheeting should remain flexible for use through normal temperature ranges.Note 28212;Rubber as used in this specification is a generic term that includes elastomers and elastomeric compounds, regardless of origin.

Standard Specification for Rubber Insulating Sheeting

KS M ISO 2231:2002 橡胶或塑料涂覆织物.试件环境调节标准大气

이 규격은 고무 또는 플라스틱 피복 직물의 전처리 방법과 전처리 요구 사항에 대해서 규정한

Rubber-or plastics-coated fabrics-Standard atmospheres for conditioning and testing

HG/T 3078-2001 橡胶、塑料辊表面特性

本标准规定了胶辊按表面质量或表面缺陷及表面处理进行的分类，并规定了表面粗糙度的测量方法。

Surface characteristics for Rubber-or plastics-covered rollers

HG/T 3050.1-2001 橡胶或塑料涂覆织物 整卷特性的测定 第一部分：测定长度、宽度和净质量的方法

本部分标准规定了测定一卷橡胶或塑料涂覆织物长度、宽度和净质量的方法。

Rubber-or plastics-coated fabrics - Determination of roll characteristics - Part 1:Method for determination of length,width and net mass

HG/T 2697-2001 胶辊 第二部分：聚氨酯胶辊

本标准规定了浇注型聚氨酯橡胶辊的产品分类、要求、试验方法、检验规则和标志、包装、运输、贮存等。 本标准适用于冶金、造纸、纺织等工业用各类浇注型聚氨酯胶辊。

Rubber roller Part 2:Polyurethane Roller

HG/T 2013-2001 胶辊 第三部分：织物预缩橡胶毯

本标准规定了织物预缩橡胶毯的产品分类、要求、试验方法、检验规则及包装、标志、贮存、运输等。 本标准适用于纺织印染等行业织物预缩处理使用的预缩毯。

Rubber roller Part 3:rubber blanket for preshrinking fabric

HG/T 2287-2001 胶辊 第一部分：印刷胶辊

本标准规定了印刷胶辊的要求、试验方法、检验规则及标志、包装、运输、贮存等。 本标准适用于凸板、平板等印刷机械用胶辊。

Rubber roller Part 1:rubber roller for printing

HG/T 2289-2001 可曲挠橡胶接头

本标准规定了可曲挠橡胶接头的定义、分类、产品标记、要求、试验方法、检验规则及标志、包装、贮存和运输等。 本标准适用于金属管路的柔性连接件--可曲挠橡胶接头。

Flexible rubber joint

ISO 6916-2:2001 软质泡沫聚合材料 海绵状多孔泡沫橡胶制品 规范 第2部分：模塑和挤塑

This part of ISO 6916 classifies flexible cellular rubber products known as sponge and expanded rubber. The base material used in their manufacture may be natural rubber, reclaimed rubber, synthetic rubber or rubber-like material, either alone or in combination. Thermoplastic rubbers are not included. This part of ISO 6916 does not apply to latex foam rubbers or shoe soling. Sheeting materials are covered by ISO 6916-1. This part (part 2) covers vulcanized cellular rubber products that are manufactured by a moulding or continuous vulcanization process, i.e. hot air, microwave, infra-red, liquid curing medium (LCM), shearing-head vulcanization or a combination of two or more of these methods. In the case of conflict between the provisions of this part of ISO 6916 and those of the detailed specification or test method for a particular product, the latter shall take precedence. Reference to the methods shall specifically state the desired test or tests.

Flexible cellular polymeric materials - Sponge and expanded cellular rubber products - Specification - Part 2: Mouldings and extrusions

BS 1970:2001 橡胶和PVC制成的热水袋规范

This British Standard specifies requirements for the physical properties and performance of both rubber and PVC hot water bottles, designed for complete or partial filling with hot water by the user.

Hot water bottles manufactured from rubber and PVC - Specification

ASTM D3578-01a 橡胶检查手套的标准规范

1.1 This specification describes certain requirements for natural rubber gloves used in conducting medical examinations and diagnostic and therapeutic procedures. It also covers natural rubber gloves used in handling contaminated medical material.1.2 This specification provides for natural rubber gloves that fit either hand, paired gloves, and gloves by size. It also provides for packaged sterile natural rubber gloves and packaged or bulk nonsterile natural rubber gloves.

Standard Specification for Rubber Examination Gloves

ASTM D3578-01ae2 橡胶检查手套的标准规范

1.1 This specification describes certain requirements for natural rubber gloves used in conducting medical examinations and diagnostic and therapeutic procedures. It also covers natural rubber gloves used in handling contaminated medical material.1.2 This specification provides for natural rubber gloves that fit either hand, paired gloves, and gloves by size. It also provides for packaged sterile natural rubber gloves and packaged or bulk nonsterile natural rubber gloves.

Standard Specification for Rubber Examination Gloves

ASTM D3578-01ae1 橡胶检查手套的标准规范

1.1 This specification describes certain requirements for natural rubber gloves used in conducting medical examinations and diagnostic and therapeutic procedures. It also covers natural rubber gloves used in handling contaminated medical material.1.2 This specification provides for natural rubber gloves that fit either hand, paired gloves, and gloves by size. It also provides for packaged sterile natural rubber gloves and packaged or bulk nonsterile natural rubber gloves.

Standard Specification for Rubber Examination Gloves

ASTM D3578-01 橡胶检查手套的标准规范

1.1 This specification describes certain requirements for natural rubber gloves used in conducting medical examinations and diagnostic and therapeutic procedures. It also covers natural rubber gloves used in handling contaminated medical material.1.2 This specification provides for natural rubber gloves that fit either hand, paired gloves, and gloves by size. It also provides for packaged sterile natural rubber gloves and packaged or bulk nonsterile natural rubber gloves.

Standard Specification for Rubber Examination Gloves

ASTM D3578-00a 橡胶检查手套的标准规范

1.1 This specification describes certain requirements for natural rubber gloves used in conducting medical examinations and diagnostic and therapeutic procedures. It also covers natural rubber gloves used in handling contaminated medical material.1.2 This specification provides for natural rubber gloves that fit either hand, paired gloves, and gloves by size. It also provides for packaged sterile natural rubber gloves and packaged or bulk nonsterile natural rubber gloves.

Standard Specification for Rubber Examination Gloves

HG/T 2450-1999 胶辊表观硬度的测定.橡胶国际硬度计法

本标准规定了以橡胶国际硬度计测定胶辊表观硬度的试验条件、仪器及试验步骤等。 本标准适用于橡胶(包括热塑性弹性体)辊的表观硬度测试，以橡胶国际硬度(IRHD)值表示。

Rubber-covered rollers-Determination of apparent hardness:IRHD method

HG/T 3079-1999 橡胶、塑料辊尺寸公差

本标准规定了橡胶、塑料辊尺寸公差的等级和测试方法。

Dimensional tolerances of rubber or plastics covered rollers

HG/T 3613-1999 橡胶或塑料涂覆织物.低温弯曲试验

本标准规定了使橡胶或塑料涂覆织物暴露在低温一定时间后，在规定温度下承受弯曲，以测定其抗低温性能的试验方法。本标准适用于厚度为O.1mm至2.2mm的涂覆织物。对于大于上述厚度的材料，则需改进标准设备(见8.2)。 鉴于各种橡胶或塑料涂覆织物被用于需要低温弯曲的不同制品，本试验不能用作判定其使用性能的唯一标准。

Rubber or plastics coated fabrics Low-temperature bend test

HG 2949-1999 电绝缘橡胶板

本标准规定了电绝缘橡胶板的技术要求、试验方法、检验规则、标志、包装、运输与贮存。 本标准适用于以橡胶为主体材料制成的、作为电气设备辅助安全用具的绝缘胶板。

Rubber insulating sheet