G49 炭黑 标准查询与下载

ASTM D6915-05 炭黑的标准规程.标准参考炭黑的评价

1.1 This practice covers guidelines for the production and testing for uniformity of a set of carbon blacks to be used as Standard Reference Blacks (SRBs).1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Carbon Black8212;Evaluation of Standard Reference Blacks

HG/T 3748-2004 橡胶配合剂 沉淀水合二氧化硅 水可溶物含量的测定 冷萃取法

本标准规定了用冷萃取法测定橡胶配合剂沉淀水合二氧化硅水可溶物含量的试剂、仪器、采样、分析步骤、结果表示及试验报告。 本标准适用于沉淀水合二氧化硅(白炭黑)。

Rubber compounding ingredients Silica, precipitated, hydrated Determination of matter soluble in water Cold extraction method

BS ISO 15825:2004 橡胶配合材料.炭黑.用盘式离心沉淀摄影法测定集料粒度分布

This International Standard specifies a method for determining the size distribution of carbon black aggregates, using a disc centrifuge photosedimentometer. This technique is based on the hydrodynamic behaviour of carbon black in a centrifugal field. The determination of the aggregate size distribution is important in the evaluation of carbon black used in the rubber industry.

Rubber compounding ingredients - Carbon black - Determination of aggregate size distribution by disc centrifuge photosedimentory

ISO 15825:2004 橡胶配合材料.炭黑.用盘式离心沉淀摄影仪测定集料粒度分布

This International Standard specifies a method for determining the size distribution of carbon black aggregates, using a disc centrifuge photosedimentometer. This technique is based on the hydrodynamic behaviour of carbon black in a centrifugal field. The determination of the aggregate size distribution is important in the evaluation of carbon black used in the rubber industry.

Rubber compounding ingredients - Carbon black - Determination of aggregate size distribution by disc centrifuge photosedimentometry

KS M ISO 12989-1:2004 铝生产用碳质材料.焙烧阳极和侧壁砖.空气反应性的测定.第1部分:质量缺损法

이 규격은 탄소 재품의 공기에 대한 반응도를 측정하는 질량 결손법에 관한 것이다.

Carbonaceous materials used in the production of aluminium-Baked anodes and sidewall blocks-Determination of the reactivity to air-Part 1:Loss in mass method

KS M ISO 12985-1:2004 铝生产用碳质材料.焙烧阳极和阴极块.第1部分:用尺寸法测定表观密度

이 규격은 알루미늄 생산에 사용되는 탄소 제품의 겉보기 밀도 측정을 위한 치수법에 관한

Carbonaceous materials used in the production of aluminium－Baked anodes and cathode blocks－Part 1：Determination of apparent density using a dimensions method

KS M ISO 12988-1:2004 铝生产用碳质材料.焙烧阳极.二氧化碳活性的测定.第1部分:质量损耗方法

이 규격은 탄소 제품의 이산화탄소에 대한 반응도를 질량 결손법에 의해 측정하는 방법에

Carbonaceous materials used in the production of aluminium-Baked anodes-Determination of the reactivity to carbon dioxide-Part 1:Loss in mass method

KS M ISO 12986-1:2004 铝生产用碳质材料.预焙烧阳极和阴极块.第1部分:用三点法测定抗弯强度/剪切强度

이 규격은 20~30℃에서 미리 구운 산화 양극과 환원 음극 블록의 휨/전단 강도(굴곡

Carbonaceous materials used in the production of aluminium-Prebaked anodes and cathode blocks-Part 1:Determination of bending/shear strength by a three-point method

KS M ISO 12985-2:2004 铝生产用碳质材料.焙烧阳极和阴极块.第2部分:用静流法测定表观密度和开口孔隙率

이 규격은 알루미늄 생산에 사용되는 탄소 제품의 겉보기 밀도와 열린 공극(물에 대하여)

Carbonaceous materials used in the production of aluminium-Baked anodes and cathode blocks-Part 2:Determination of apparent density and of open porosity using a hydrostatic method

DIN ISO 11234:2004 橡胶配合剂.炭黑(造粒).灰份测定

This International Standard specifies a method for determining the dust content of pelletized carbon blacks for use in the industry. This method permits a differentiation to be made between micro-pellets and dust, and is applicable to all pelletized rubber-grade carbon blacks, more particularly to those pelletized by the dry process which frequently have smaller pellet sizes tha n their wet pelletized counterparts.

Rubber compounding ingredients - Carbon black (pelletized) - Determination of dust content (ISO 11234:1995)

ISO 12988-2:2004 铝生产用碳素材料.焙烧阳极.二氧化碳反应性的测定.第2部分:热解重量分析法

This test method covers the thermogravimetric (TGA) determination of CO2 reactivities and dusting of shaped carbon anodes used in the aluminium reduction industry. Many types of apparatus are available with a wide variety of thermal conditions, sample-size capability, materials of construction and procedures for determining the mass loss and subsequent rate of reaction. This test method standardizes the variables of sample dimensions, reaction temperature, gas velocity over the exposed surfaces, and reaction time such that results obtained on different types of apparatus are correctable.

Carbonaceous materials used in the production of aluminium - Baked anodes - Determination of the reactivity to carbon dioxide - Part 2: Thermogravimetric method

ISO 3858:2004 橡胶配合剂.炭黑.甲苯萃取液透光率的测定

This International Standard specifies a method for the determination of the light transmittance of the toluene extract from carbon black for use in the rubber industry, as a means of measuring the discolouration caused by the extractable matter. The light transmittance value provides an estimate of the degree of discolouration caused by the toluene-extractable matter present on the surface of the carbon black. This method may not be applicable to carbon blacks with a high extractable-matter content.

Rubber compounding ingredients - Carbon black - Determination of light transmittance of toluene extract

ASTM D1514-04 炭黑标准试验方法.筛渣

The quantity of sieve residue of carbon black is important in some molded or extruded products as it may relate to the surface appearance of those products. The maximum residue in each application is normally determined and agreed to between the user and the producer.1.1 This test method describes the determination of the water wash sieve residue in regular untreated carbon blacks. It may not be applicable to oil-treated carbon blacks because the oil would prevent proper wetting of the black by water. 1.2 The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific precautionary statements, see Section 6.

Standard Test Method for Carbon Black8212;Sieve Residue

ASTM D3053-04b 炭黑的相关标准术语

1.1 This terminology covers a compilation of definitions of technical terms used in the carbon black and rubber industries. Terms that are generally understood or adequately defined in other readily available sources are not included.

Standard Terminology Relating to Carbon Black

ASTM D1765-04 橡胶制品用碳黑的标准分类系统

1.1 This classification system is used to classify rubber grade carbon blacks by the use of a four-character nomenclature system. The first character gives some indication of the influence of the carbon black on the rate of cure of a typical rubber compound containing the black. The second character gives information on the average surface area of the carbon black. The last two characters are assigned arbitrarily.1.2 All rubber-grade carbon blacks for which a number is currently assigned at the time of publication of this classification system are listed in together with some of their typical properties. ASTM classification numbers ("N" or "S" designation) not listed in have either been withdrawn or are not currently assigned. The use of inactive or unassigned N designations is highly discouraged until such a time as the designation is officially reactivated or assigned by subcommittee D 24.411.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Classification System for Carbon Blacks Used in Rubber Products

ASTM D3053-04a 炭黑的相关标准术语

1.1 This terminology covers a compilation of definitions of technical terms used in the carbon black and rubber industries. Terms that are generally understood or adequately defined in other readily available sources are not included.

Standard Terminology Relating to Carbon Black

ASTM D5230-04e1 炭黑的标准试验方法.自动形成的单个颗粒强度

1.1 This test method covers a procedure for measuring individual pellet hardness of carbon black by the automated pellet hardness tester.1.2 The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Carbon Black8212;Automated Individual Pellet Hardness

ASTM D3313-04 炭黑的标准试验方法.单个炭黑颗粒硬度

1.1 This test method covers a method for measuring the hardness of individual pellets of carbon black.1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Carbon Black-Individual Pellet Hardness

ASTM D3053-04 炭黑的相关标准术语

1.1 This terminology is a compilation of definitions of technical terms used in the carbon black and rubber industries. Terms that are generally understood or adequately defined in other readily available sources are not included.

Standard Terminology Relating to Carbon Black

ASTM D3493-04 炭黑的标准试验方法.压制样品的油吸收值

1.1 This test method covers the procedure for the mechanical compression of a carbon black sample and the determination of the oil absorption number of the compressed sample. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Carbon Black8212;Oil Absorption Number of Compressed Sample (COAN)