G49 炭黑 标准查询与下载

ASTM D1937-98e1 颗粒碳黑的标准试验方法.质量强度

1.1 This test method covers the determination of the mass strength of pelleted carbon black. It is designed to determine the mass strength of a cylindrical column of pelleted carbon black. The results of this test are believed to relate to the ability of the carbon black to flow in bulk handling systems.1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Carbon Black, Pelleted8212;Mass Strength

JIS K 6217:1997 橡胶工业用碳黑的基本特性的试验方法

Testing methods of fundamental characteristics of carbon black for rubber industry

JIS K 6219:1997 橡胶工业用碳黑的颗粒性能的测试方法

Testing methods of properties of pellets of carbon black for rubber industry

HG/T 2880-1997 硅铝炭黑技术条件

Silica-alumina carbon black-Specification limits

HG/T 2879.2-1997 橡胶配合剂.陶土.铝含量的测定

Rubber Compounding ingredients-kaolin clay-Determination of aluminium content

HG/T 2879.3-1997 橡胶配合剂.陶土.硅含量的测定

Rubber compounding ingredients-kaolin clay-Determination of silicon content

HG/T 2879.1-1997 橡胶配合剂.陶土.总铜含量的测定

Rubber Compounding ingredients-kaolin clay-Determination of total copper content

HG/T 2879.4-1997 橡胶配合剂.陶土.SiO（下标2）/Al（下标2）O（下标3）比率的计算

Rubber Compounding ingredients-kaolin clay-Calculation of the SiO2/Al2O3 ratio

HG/T 2879.5-1997 橡胶配合剂.陶土.总铁含量的测定

Rubber Compounding ingredients-kaonlin clay-Determination of total iron content

HG/T 2879.6-1997 橡胶配合剂.陶土.总锰含量的测定

Rubber Compounding ingredients-kaolin clay-Determination of total manganese content

NF T45-131:1996 橡胶配合材料.炭黑.热损失的测定

Rubber compounding ingredients. Carbon black. Determination of loss on heating.

BS 5293-3:1996 对橡胶工业中使用的炭黑进行取样和测试 细粉含量的测定方法

This International Standard specifies a method for the determination of the fraction of a test portion of pellet-ized carbon black that will pass through a sieve with 125 μm nominal aperture size under specified con-ditions (i.e. the fines content). It is applicable to all types of pelletized carbon black for use in the rubber industry.

Sampling and testing carbon black for use in the rubber industry. Method for determination of fines content

ISO/TR 6809:1996 橡胶配合剂 炭黑 标准参比碳黑

Rubber compounding ingredients - Carbon black - Standard reference blacks

ISO 1435:1996 橡胶配合剂 炭黑(造粒) 筛余物测定

Describes a method for the determination of the fraction of a test portion of pelletized carbon black used in rubber industry that will pass through a sieve with 125 m nominal aperture size under specified conditions. Replaces the third edition.

Rubber compounding ingredients - Carbon black (pelletized) - Determination of fines content

BS 5293-4:1996 橡胶工业用炭黑取样和试验方法.第4部分:粒料尺寸分布测定方法

Carbon black for the rubber industry is generally pel-letized to reduce dust and to improve handling and in-corporation into polymers. Variations in pellet size distribution can affect dispersion in polymers, bulk handling, and conveying properties. This International Standard specifies a method for the determination of the pellet size distribution of carbon black.

Sampling and testing carbon black for use in the rubber industry - Method for determination of pellet size distribution

BS 5293-8:1996 对橡胶工业中使用的炭黑进行取样和测试 粉尘含量测定方法

This International Standard specifies a method for determining the dust content of pelletized carbon blacks for use in the industry. This method permits a differentiation to be made be-tween micro-pellets and dust, and is applicable to all pelletized rubber-grade carbon blacks, more particu-larly to those pellitized by the dry process which fre-quently have smaller pellet sizes than their wet-pelletized counterparts.

Sampling and testing carbon black for use in the rubber industry. Method for determination of dust content

BS 5293-12:1996 橡胶工业用炭黑取样和试验方法.第12部分:表面活性剂吸附法测定表面积

This International Standard specifies methods for the determination of the surface area of carbon blacks, excluding the area of micropores that are too small to admit molecules of hexadecyltrimethylammonium bromide (cetyltrimethylammonium bromide, com-monly referred to as CTAB). The methods are suitable for characterizing rubber grade carbon blacks of all types.

Sampling and testing carbon black for use in the rubber industry - Methods for determination of surface area by surfactant adsorption

BS 5293-2:1996 对橡胶工业中使用的炭黑进行取样和测试 浇注密度的测定方法

This International Standard specifies a method for de-termining the pour density of all types of pelletized carbon blacks for use in the rubber industry.

Sampling and testing carbon black for use in the rubber industry. Method for determination of pour density

HG/T 2797.1-1996 硅铝炭黑筛余物的测定

本标准规定了硅铝炭黑干法筛余物的测定方法。 本标准适于各种类型硅铝炭黑筛余物的测定。

Determination of Silica Aluminum Carbon Black Sieve Residue

HG/T 2797.4-1996 硅铝炭黑pH值的测定

本标准规定了硅铝炭黑pH值的测定方法。 本标准适用于各种类型的硅铝炭黑pH值的测定。

Determination of pH value of silicon aluminum carbon black