共找到 613 条与 炭黑 相关的标准,共 41 页
Raw materials for the rubber industry. Carbon black. Evaluation of the quality of the carbon black in a styrene-butadiene based mixture.
Carbon blacks used in rubber products - Classification system
The method described in the document is used for the determination of the anisotropy degree of carbon and graphite materials (solid materials).
Testing of carbon materials; determination of anisotropy degree; solid materials
1.1 This practice outlines procedures for the sampling and data reporting of bulk shipments of carbon black in three-compartment hopper rail cars, but the same principles can apply to sampling compartmented bulk highway trailers as well. Note 18212;The tests to be made on the samples obtained by this practice shall be determined by the purchaser and the manufacturer. The specific details of each procedure are described in appropriate ASTM test methods used for testing carbon black.1.2 The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Practice for Carbon Black8212;Sampling Bulk Shipments
RUBBER COMPOUDING INGREDIENTS. CARBON BLACK. DETERMINATION OF LIGHT TRANSMITTANCE OF TOLUENE EXTRACT. PART 2 : METHOD FOR PRODUCT EVALUATION.
RUBBER COMPOUNDING INGREDIENTS. CARBON BLACK. DETERMINATION OF LIGHT TRANSMITTANCE OF TOLUENCE EXTRACT. PART 1 : RAPID METHOD.
This part of ISO 4656 specifies a method using an absorptometer for the determination of the dibutyl phthalate absorption number of carbon black for use in the rubber industry. NOTE 1 ISO 4656-2:1991, Rubber compounding ingredi-ents —Carbon black —Determination of dibutyl phthalate absorption number —Part 2: Method using plastograph or plasticorder, specifies a method based on the use of a plastograph or plasticorder.
Sampling and testing carbon black for use in the rubber industry - Method for determination of dibutyl phthalate absorption number using an absorptometer
This method is not applicable to treated carbon blacks which contain added volatile materials.
Sampling and testing carbon black for use in the rubber industry - Method for determination of loss of mass on heating
It is preferable to compare a reference carbon black with use under test owing to permitted variations in equipment and procedure.
Sampling and testing carbon black for use in the rubber industry. Method for evaluation in styrene-butadiene rubbers
Method may not be applicable to oil-treated blacks because of inadequate wetting.
Sampling and testing carbon black for use in the rubber industry - Method for determination of sieve residue
Raw materials for the rubber industry. Carbon blacks. Classification system.
Raw material for the rubber industry. Carbon black. Determination of solvent extractable material.
Raw materials for the rubber industry. Carbon black. Determination of the influence on the extrusion properties of a styrene-butadiene based mixture.
This specification covers carbon in the form of hollow microspheres. This product has been used typically as a filler material in syntactic foam shapes, but usage is not limited to such applications.
Microspheres, Carbon, Hollow
This part of ISO 4656 specifies a method using a plastograph or plasticorder for the determination of the dibutyl phthalate absorption number of carbon black for use in the rubber industry. NOTE 1 ISO 4656-1:1985, Rubber compounding ingredi-ents —Carbon black —Determination of dibutyl phthalate absorption number —Part 1: Method using absorp-tometer, specifies a method based on the use of an ab-sorptometer.
Sampling and testing carbon black for use in the rubber industry - Method for determination of dibutyl phthalate absorption number using plastograph or plasticorder
Specifies a method for determining the water-wash sieve residue from regular, untreated carbon black for the rubber industry. It may not be applicable to oil-treated blacks because the oil could prevent proper wetting of the black by water.
Rubber compounding ingredients; carbon black; determination of sieve residue
Describes the principle, the apparatus, the expression of results and the contents of the test report. Does not apply to treated carbon blacks which contain added volatile materials.
Rubber compounding ingredients; carbon black; determination of loss on heating
Specifies a standard test formula for evaluation of carbon black in rubbers. Describes the evaluation of vulcanization characteristics as well as the tensile stress strain properties of vulcanized test mixes. Gives the contents of the test report.
Rubber compounding ingredients; carbon black; method of evaluation in styrene-butadiene rubbers
Rubber compounding ingredients. Carbon black (pelletized). Determination of fines content.
Rubber compounding ingredients; carbon black; determination of dibutyl phthalate absorption number; part 2: method using plastograph or plasticorder
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号