G89 火工产品 标准查询与下载

GJB 6092.2-2007 地面光电无源干扰设备试验场试验方法 第2部分: 烟幕的激光遮蔽性能

本部分规定了地面光电无源干扰设备在试验场试验时，对烟幕的激光遮蔽性能试验的基本要求和试验方法。 本部分适用于地面光电无源干扰设备（以下称为被试设备）鉴定和定型试验，研制、生产阶段的试验可参照使用。

Test method of range for ground electro-optical passive jamming equipment-Part 2: Performance of smokescreen against laser

GJB 1245A-2007 火箭弹通用规范

本规范规定了火箭弹的通用要求。 本规范适用于火箭弹。

General specification for rocket shell

GJB 6102-2007 轻武器标志细则

本标准规定了轻武器（不含弹药，下同）、备 / 附件及其包装容器上的标志内容、标志模式、标志位置和标志制作方法。 本标准适用于轻武器、备 / 附件及其包装容器的标志设计和标志制作。

Minute regulations of small arms markings

GJB 1012A-2007 破甲弹通用规范

本规范规定了破甲弹的通用要求。 本规范适用于火炮、火箭 （筒）及枪发射的破甲弹、破甲子弹及在此基础上发展的具有破甲功能的多用途弹。反坦克导弹破甲战斗部、自锻破片战斗部等也可参照执行。

General specification for shaped-charge projectile

GJB 863A-2007 航空瞄准具通用规范

本规范规定了军用飞机上使用的航空瞄准具（以下简称“瞄准具”）的要求、质量保证规定和交货准备等。 本规范适用于军用飞机上使用的瞄准具的设计、制造、检验、包装、运输和贮存。

General speciflcation for airborne sights

GJB 6103-2007 反坦克导弹通用规范

本规范规定了反坦克导弹的通用要求、质量保证规定、交货准备等。 本规范适用于反坦克导弹（以下简称为导弹）。

General specification for antitank missiles

GJB 6092.1-2007 地面光电无源干扰设备试验场试验方法 第1部分： 烟幕的红外遮蔽性能

本部分规定了地面无源光电干扰设备在试验场试验时，对烟幕红外遮蔽性能试验的基本要求和试验方法。 本部分适用于地面无源光电干扰设备（以下称为被试设备）鉴定和定型试验，研制、生产阶段的试验可参照使用。

Test method of range for ground electro-optical passive jamming equipment-Part 1: Performance of smokescreen against infrared

BS EN 14035-5:2006 焰火.电池和组合.规范和试验方法

This European Standard specifies requirements for the construction, performance, primary packaging and labelling of batteries and combinations and the corresponding test methods. It is applicable to fireworks which are classified as batteries and combinations in categories 2 and 3 according to EN 14035-2. It is applicable to category 2 batteries and combinations containing elements, each corresponding to a type of firework listed in EN 14035-2 and which conform to the relevant requirements of categories 1 and 2. It is applicable to category 3 batteries and combinations containing elements, each corresponding to a type of firework listed in EN 14035-2 and which conform to the relevant requirements of categories 1, 2 and 3. It is not applicable to banger batteries and flash banger batteries, which are specified in EN 14035-4 and EN 14035-12 respectively. NOTE 1 The elements (types of firework) that can be included in a battery or combination are specified in Clause 4. It is not applicable to batteries and combinations containing pyrotechnic composition that includes any of the following substances: — arsenic or arsenic compounds; — mixtures containing a mass fraction of chlorates greater than 80 %; — mixtures of chlorates with metals; — mixtures of chlorates with red phosphorus; — mixtures of chlorates with potassium hexacyanoferrate(II); — mixtures of chlorates with sulfur; — mixtures of chlorates with sulfides; — lead or lead compounds; — mercury compounds; — white phosphorus; — picrates or picric acid; — potassium chlorate with a mass fraction of bromates greater than 0,15 %; — sulfur with an acidity, expressed as mass fraction of sulfuric acid, greater than 0,002 %; — zirconium with a particle size of less than 40 μm. NOTE 2 In EN 14035-2, batteries and combinations are classified as follows: — brief description: — battery: assembly including several elements, each of the same type and corresponding to one of the types of firework listed in EN 14035-2, with one point of ignition; — combination: assembly including several elements, not all of the same type, each corresponding to one of the types of firework listed in EN 14035-2, with one point of ignition; — principal effects: as for the individual elements. Schemes for type testing of batteries and combinations and batch testing of batteries and combinations are specified in Annex A and Annex B respectively.

Fireworks - Batteries and combinations - Specification and test methods

BS EN 14035-38:2006 焰火.第38部分:子弹管.规范和试验方法

This European Standard specifies requirements for the construction, performance, primary packaging and labelling of shot tubes and the corresponding test methods. It is applicable to fireworks which are classified as shot tubes in categories 2 and 3 in EN 14035-2. It is not applicable to shot tubes containing pyrotechnic composition which includes any of the following substances: — arsenic or arsenic compounds; — mixtures containing a mass fraction of chlorates greater than 80 %; — mixtures of chlorates with metals; — mixtures of chlorates with red phosphorus; — mixtures of chlorates with potassium hexacyanoferrate(II); — mixtures of chlorates with sulfur; — mixtures of chlorates with sulfides; — lead or lead compounds; — mercury compounds; — white phosphorus; — picrates or picric acid; — potassium chlorate with a mass fraction of bromates greater than 0,15 %; — sulfur with an acidity, expressed as mass fraction of sulfuric acid, greater than 0,002 %; — zirconium with a particle size of less than 40 μm. NOTE In EN 14035-2, shot tubes are classified as follows: — brief description: tube containing propellant charge and a pyrotechnic unit, with or without a transmitting fuse; — principal effects: ejection of the pyrotechnic unit, producing a visual and/or aural effect in the air. Schemes for type testing of shot tubes and batch testing of shot tubes are specified in Annex A and Annex B respectively.

Fireworks - Part 38: Shot tubes - Specification and test methods

SANS 6219:2007 允许的电雷管：可燃性（图库测试）

Specifies a method to determine the incendivity of permitted electric detonators. Does not apply to electronic detonators or to permitted detonators of any other type.

Permitted electric detonators: Incendivity (Gallery test)

WJ/T 9056.2-2006 工业炸药密度测定方法 第2部分：炸药密度测定

Methods for Determination of Density of Industrial Explosives Part 2: Determination of Density of Explosives

WJ/T 9056.1-2006 工业炸药密度测定方法 第1部分：药卷密度测定

Methods for Determination of Density of Industrial Explosives Part 1: Determination of Density of Coils

WJ/T 9052.2-2006 工业炸药感度试验方法 第2部分：撞击感度

本部分规定了工業炸藥撞i 本部分身用於工業炸藥撞i

Test Methods for Sensitivity of Industrial Explosives Part 2: Impact Sensitivity

WJ/T 9052.3-2006 工业炸药感度试验方法 第3部分：含水炸药热感度

Test Methods for Sensitivity of Industrial Explosives Part 3: Thermal Sensitivity of Aqueous Explosives

WJ/T 9052.1-2006 工业炸药感度试验方法 第1部分：摩擦感度

Test Methods for Sensitivity of Industrial Explosives Part 1: Sensitivity to Friction

WJ/T 9051-2006 煤矿许用炸药煤尘 可燃气安全度试验方法及判定

Test method and judgment of safety degree of explosives, coal dust and combustible gas allowed in coal mines

WJ/T 9054-2006 工业炸药热安定性试验方法：差示扫描量热法

本标准规定了工业炸药热安定性试验用仪器设备、试验程序、数据处理和结果表述等。 本标准适用于工业炸药热安定性的测试。

Test method for thermal stability of industrial explosives: differential scanning calorimetry

WJ/T 9055-2006 工业炸药殉爆距离试验方法

本标准规定了工業炸藥殉燥距離试验的沙地法和其吊法的试验用器材、試樣制备方法和试验步骤以 及试验结果等内容。 本标准适用于工业炸药殉爆距离试验。

Test method for detonation distance of industrial explosives

HJB 384.6-2007 液体推进剂化验分析规程 第6部分：鱼推-3

Liquid Propellant Analysis Procedures Part 6: Yutui-3

HJB 385-2007 海防导弹报废点火药盒销毁要求

Requirements for Destruction of Scrapped Ignition Kits for Coastal Defense Missiles