G92 化工机械 标准查询与下载

HG/T 3796.5-2005 圆盘涡轮式搅拌器

本标准规定了圆盘涡轮式搅拌器的产品分类、结构与主要参数、技术要求、以及检验、包装和贮运等要求。 本标准适用于钢制圆盘涡轮式搅拌器。

Impeller of disc turbine

HG/T 3796.4-2005 开启涡轮式搅拌器

本标准规定了开启涡轮式搅拌器的产品分类、结构与主要参数、技术要求、以及检验、包装和贮运等要求。 本标准适用于钢制开启涡轮式搅拌器。

Impeller of Open turbine

HG/T 3796.3-2005 桨式搅拌器

本标准规定了桨式搅拌器的产品分类、结构与主要参数、技术要求、以及检验、包装和贮运等要求。 本标准适用于钢制桨式搅拌器。

Paddle impeller

HG/T 3796.1-2005 搅拌器型式及基本参数

本标准规定了搅拌器型式及基本参数。 本标准适用于机械搅拌容器所设置的搅拌器，用于密度小于200Okg/m时的液一液、气-液、固-液两相及气-液-固三相介质进行各种物理和化学过程的搅拌。 其他用途的搅拌器亦可参照采用本标准。

Impeller types and parameters

HG 3157-2006 液化气体罐车用弹簧安全阀

Spring safety valve for liquefied gas tanker

HG 3158-2006 液化气体罐车用紧急切断阀

Emergency shut-off valve for liquefied gas tanker truck

DIN 28136-3:2005 搅拌容器.第3部分:搪玻璃钢件搅拌容器顶盖喷嘴的位置和尺寸

The document applies to steel agitator vessels, glass-lined in accordance with DIN 28136-1 and specifies the position and sizes of cover nozzles. In addition, DIN 28136-3 also applies.

Agitator vessels - Part 3: Position and sizes of cover nozzles for glass lined steel agitator vessels

DIN 28136-2:2005 搅拌容器.第2部分:非合金和不锈钢容器顶盖喷嘴的位置和尺寸

This standard is to be used for agitator vessels of carbon and stainless steel according to DIN 28136-1 and specifies the positions and sizes of cover nozzles.

Agitator vessels - Part 2: Positions and sizes of cover nozzles in non-alloy and stainless steel vessels

DIN 28136-1:2005 搅拌容器.第1部分:主要尺寸

The document applies to main dimensions of agitator vessels designed upon agreement without casing and semitubular coil jacket as well as with outer casing (AM) or semitubular coil jacket (HS).

Agitator vessels - Part 1: Principal dimensions

BS EN 12757-1:2005+A1:2010 涂层材料用搅拌机械.安全性要求.车辆表面整修用的搅料机械

1.1 This European Standard applies to the design and construction of mixing machinery for liquid coating materials equipped with container of maximal volume ≤ 10 l used by vehicle refinishers and their coating materials distributors. The pressure related parts of the machines covered are classified as no higher than category I under article 9 of the Pressure Equipment Directive 97/23/EC. NOTE Pressure related parts of the machines referred to in this European Standard exceeding the limits of category I may lead to additional application of the Pressure Equipment Directive 97/23/EC. This European Standard deals with all significant hazards, hazardous situations and events relevant to mixing machinery mentioned above, when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4). Mixing machinery can operate by stirring or vibrating (shaking) and consists of the following equipment: ? cabinet; ? stirrer; ? vibrator; ? shaker; ? drive unit and related devices; ? container for coating material; ? safety, measuring and control devices; ? lighting; ? heating equipment and/or air conditioning inside the mixing cabinet. The mixing machinery may be fixed or mobile. 1.2 The following is excluded from this European Standard: ? Mixing machinery intended for: ? pressure vessels; ? open or closed material containers larger than 10 l; ? hand-held mixing tools. 1.3 This European Standard is not applicable to mixing machinery which is manufactured before the date of publication of this European Standard by CEN.

Mixing machinery for coating materials. Safety requirements. Part 1: Mixing machinery for use in vehicle refinishing

BS EN 12757-1:2005 涂层材料用搅拌机械.安全要求.车辆表面整修用的搅料机械

1.1 This European Standard applies to the design and construction of mixing machinery for liquid coating materials equipped with container of maximal volume ≤ 10 l used by vehicle refinishers and their coating materials distributors. The pressure related parts of the machines covered are classified as no higher than category I under article 9 of the Pressure Equipment Directive 97/23/EC. NOTE Pressure related parts of the machines referred to in this European Standard exceeding the limits of category I may lead to additional application of the Pressure Equipment Directive 97/23/EC. This European Standard deals with all significant hazards, hazardous situations and events relevant to mixing machinery mentioned above, when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4). Mixing machinery can operate by stirring or vibrating (shaking) and consists of the following equipment: - cabinet; - stirrer; - vibrator; - shaker; - drive unit and related devices; - container for coating material; - safety, measuring and control devices; - lighting; - heating equipment and/or air conditioning inside the mixing cabinet. The mixing machinery may be fixed or mobile. 1.2 The following is excluded from this European Standard: - Mixing machinery intended for: - pressure vessels; - open or closed material containers larger than 10 l; - hand-held mixing tools. 1.3 This European Standard is not applicable to mixing machinery which are manufactured before the date of publication of this European Standard by CEN.

Mixing machinery for coating materials - Safety requirements - Mixing machinery for use in vehicle refinishing

DIN EN ISO 10439:2004 石油、化学、气体工业.离心压缩机

This International Standard specifies requirements for the design, materials, fabrication, inspection, testing and preparation for shipment of centrifugal compressors for use in petroleum, chemical and gas service industries.#,,#

Petroleum, chemical and lgas service industries - Centrifugal compressors (ISO 10439:2002); German and English version EN ISO 10439:2002

BS EN ISO 10442:2003 石油、化学和气体工业.整体封装齿轮传动离心空气压缩机

ISO 10442:2002 specifies requirements and gives recommendations for the design, materials, fabrication, inspection, testing and preparation for shipment of constant-speed, packaged, integrally geared centrifugal air compressors, including their accessories, for use in the petroleum, chemical and gas service industries. It is also applicable to gas services other than air that are non-hazardous and non-toxic. It is not applicable to machines that develop a pressure rise of less than 35 kPa above atmospheric pressure, which are classed as fans or blowers.

Petroleum, chemical and gas service industries - Packaged, integrally geared centrifugal air compressors

BS EN ISO 10439:2002 石油,化学和气体工业.离心压缩机

ISO 10439 specifies requirements and gives recommendations for the design, materials, fabrication, inspection, testing and preparation for shipment of centrifugal compressors for use in the petroleum, chemical and gas service industries. It is not applicable to machines that develop less than 35 kPa above atmospheric pressure, nor is it applicable to packaged, integrally geared centrifugal air compressors, which are covered in ISO 10442.

Petroleum, chemical and gas service industries. Centrifugal compressors

HG/T 3139.5-2001 釜用立式减速机FJ系列圆柱圆锥齿轮减速机

本标准规定了门系列两级、三级圆柱圆锥齿轮减速机(以下简称减速机)的产品分类、要求、试验方法、检验规则、标志、包装、运输、贮存。 · 本标准适用于石油化工、冶金矿山、污水处理、制药等釜用搅拌减速机以及其他用途的立式减速机。

Vertical reducer for tank series FJ cyclindrical and cone gears reducer

HG/T 3139.4-2001 釜用立式减速机LPJ系列圆柱齿轮减速机

本标准规定了LPJ系列两级、三级平行轴圆柱齿轮减速机(以下简称减速机)的产品分类、要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于石油化工、制药、轻工食品等釜用搅拌减速机以及其他用途的立式减速机。

Vertical reducer for tank series LPJ cylindrical gears reducer

HG/T 3139.6-2001 釜用立式减速机DC系列圆柱齿轮减速机

本标准规定了DC系列单级同轴线式圆柱齿轮减速机(以下简称减速机)的产品分类、要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于石油化工、制药、轻工食品及污水处理等釜用搅拌减速机以及其他用途的立式减速机。

Vertical reducer for tank series DC cylindrical gears reducer

HG/T 3139.7-2001 釜用立式减速机DJC系列圆柱齿轮减速机

本标准规定了DJC系列单级圆柱齿轮减速机(以下简称减速机)的产品分类、要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于石油化工、制药等釜用搅拌减速机以及其他用途的立式减速机。

Vertical reducer for tank Series DJC cylindrical gears reducer

HG/T 3139.11-2001 釜用立式减速机YP系列带传动减速机

本标准规定了YP系列大功率带传动减速机(以下简称减速机)的产品分类、要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于石油化工、制药、轻工、冶金矿山、水处理等釜用搅拌减速机以及其他用途的立式减速机。

Vertical reducer for tank series YP belt-driving reducer

HG/T 3139.12-2001 釜用立式减速机KJ系列可移式圆柱齿轮减速机

本标准规定了KJ系列可移式单级圆柱齿轮减速机(以下简称减速机)的产品分类、要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于石油化工、轻工食品、制药等需要移动场合的釜用搅拌减速机。

Vertical reducer for tank series KJ portable cylindrical gears mixer