G93 化工设备 标准查询与下载

HG/T 21616-1997 化工厂常用设备消声器标准系列

本标准系列中的消声器适用于化工生产中各类产生噪声的设备消声，根据发声设备类别及技术参数、规格，选用不同类型的消声器，最大消声量在50dB(A)以内。

Standard series of mufflers for common equipment in chemical plants

ARMY MIL-B-20100 C NOTICE 1-1997 用于轻型武器的口径.腔及撞针孔的刷子和清洁器

This notice should be filed in fiont of MIL-B-201OOC(AR) dated 5 February 1973

BRUSHES, CLEANING, FOR BORE, CHAMBER AND FIRING PIN HOLE OF SMALL ARMS

NF B34-005*NF EN 1595:1997 硅硼玻璃3.3制压力设备.设计、生产和试验的一般规则

Pressure equipment made from borosilicate glass 3.3. General rules for design, manufacture and testing.

ARMY MIL-R-48628 A NOTICE 3-1997 M14型轻武器贮藏架

This notice should be filed in fiont of MIL-R-48628A(AR) dated 3 September 1993

RACK, STORAGE, SMALL ARMS: M14

HG/T 2823-1997 一氟三氯甲烷包装钢桶

本标准规定了CFC-11包装钢桶的要求、抽样、试验方法、标志、包装、运输和贮存等。 本标准适用于包装CFC-11、容积为200L的包装钢桶的制造、流通、使用和监督检验等领域，该产品适用于CFC-11的一次性包装。

Trichlorofluoromethane packing steel drum

ASTM D6086-97 碳黑压缩容积指数的标准试验方法

1.1 These test methods cover a procedure to measure a carbon black property called the Compressed Volume Index. This index is the ratio (x100) of two void volumes, the void volume of a sample of a candidate carbon black divided by the void volume of a Standard Reference Black, SRB B5. The void volume is obtained by measuring the compressed volume of a weighted sample contained in a cylindrical chamber when a specified compression force is applied by a movable piston with a displacement transducer on the piston mechanism. 1.2 The compressed volume index is an important carbon black property that relates to the compounded physical properties for carbon black-filled elastomers. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Methods for Carbon Black--Compressed Volume Index

NAVY MIL-G-85231 NOTICE 1-1996 OK-293A/AWW制导武器控制组

This notice should be filed in front of MIL-G-8523 l(AS), dated 30 October 1984, and Amendment 1, dated 7 November 1985.

GUIDED WEAPON CONTROL GROUP OK-293A/AWW

HG/T 21608-1996 液体装卸臂

Liquid Loading Arm

HG/T 20589-1996 化学工业炉受压元件强度计算规定

本规定用于化学工业炉受压元件强度计算。除本规定外，相关部分则应遵循国家颁发的《蒸汽锅炉安全技术监察规程》、《压力容器安全技术监察规程》等有关锅炉、压力容器的法令、法规及规定。 1.1.1本规定适用于新建的化学工业炉受压元件的强度计算。 1.1.2本规定适用于下列直接火焰加热的化学工业炉受压元件的强度计算。 1.1.2.1设计压力小于或等于24MPa、设计温度小于或等于900℃，由碳系钢、合金钢、不锈钢和耐热钢轧制的无缝钢管与管件组焊一体的轧制炉管。 1.1.2.2设计压力小于或等于5MPa、设计温度小于或等于1100℃，由离心铸造的耐热合金管与管件组焊一体的离心铸造炉管。 1.1.2.3碳素钢、合金钢、不锈钢、耐热钢、耐热铸钢、碳素钢及合金钢铸件的管件，如集合管、弯头、兰通管、叉形管、锥形管等。 1.1.3本规定也适用于有耐火内衬的新建各种化学工业炉的受内压圆筒、封头和元件的强度计算，如气化炉、二段转化炉、余热锅炉管箱等。

Specification of Strength Calculation on Pressure Parts for Chemical Process Furnace

BS 4485-4:1996 水冷却塔.第4部分:冷却塔结构设计和建造规程

Applicable to structural design and construction on site of hyperboloidal shell natural draught towers, and to mechanical draught towers.

Water cooling towers - Code of practice for structural design and construction

DIN 28082-2:1996 设备立式支架.第2部分:带爪的脚扣环或带攀缘的双扣环.尺寸

The document specifies the dimensions of skirts predominantly used for process plants in the open air, which are designed to resist also loads due to wind pressure.#,,#

Skirts for apparatus - Part 2: Bottom ring with bracket supports or twin ring with webs; dimensions

ARMY MIL-D-55456 B NOTICE 2-1996 J-2317()/U配电箱.J-1077()/U配电箱

This commercial item description covers brown kraft paper used for general wrapping applications.

DISTRIBUTION BOX, J-1077()/U DISTRIBUTION BOX, J-2317()/U

ARMY MIL-PRF-13587 F-1996 60吨移动式集料储备箱

This specification is approved for use by all Departments and Agencies of the Department of Defense.

BIN, STORAGE, AGGREGATE, PORTABLE, 60-TON

ASTM E260-96(2011) 填料塔气相色谱法的标准操作规程

This practice describes a procedure for packed-column gas chromatography. It provides general comments, recommended techniques, and precautions. A recommended form for reporting GC methods is given in Section 14.1.1 This practice is intended to serve as a general guide to the application of gas chromatography (GC) with packed columns for the separation and analysis of vaporizable or gaseous organic and inorganic mixtures and as a reference for the writing and reporting of GC methods. Note 18212;This practice excludes any form of gas chromatography associated with open tubular (capillary) columns. 1.2 This standard does not purport to address all the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazard statements are given in Section 8 and 9.1.3.

Standard Practice for Packed Column Gas Chromatography

ARMY MIL-R-48628 A REINST NOTICE 2-1996 M14型轻武器贮藏架

MIL-R-48628A dated 3 September 1993 is hereby reinstated and may be used for acquisition

RACK, STORAGE, SMALL ARMS: M14

ASTM E260-96(2006) 填料塔气相色谱法的标准操作规程

This practice describes a procedure for packed-column gas chromatography. It provides general comments, recommended techniques, and precautions. A recommended form for reporting GC methods is given in Section 14.1.1 This practice is intended to serve as a general guide to the application of gas chromatography (GC) with packed columns for the separation and analysis of vaporizable or gaseous organic and inorganic mixtures and as a reference for the writing and reporting of GC methods.Note 18212; This practice excludes any form of gas chromatography associated with open tubular (capillary) columns.1.2 This standard does not purport to address all the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazard statements are given in Section 8 and 9.1.3.

Standard Practice for Packed Column Gas Chromatography

HG/T 21537.7-1992 搅拌传动装置 碳钢填料箱

Stirring Drive Carbon Steel Stuffing Box

HG/T 20575-1995 化学工业炉阻力计算规定

1.0.1本标准适用于具有燃烧系统、鼓风系统、烟气系统的常压化学工业炉及管式炉的烟气、空气通道及管内介质流动的阻力计算。 1.0.2本标准不适用于带有填料或催化剂的反应炉及特殊工业炉。

Specification of Resistance Calculation for Chemical Industrial Furnace

HG/T 2741-1995 压力容器用碳钢铸件技术条件

本标准规定了压力容器用碳钢铸件的制造、检验及验收等方面的技术要求。 本标准适用于用熔焊方法与其他铸钢、锻钢或钢板组装的阀门、法兰，管件等承压零件的碳钢铸件。

Specifications for carbon steel castings for pressure vessels

ARMY MIL-S-51210 A NOTICE 1-1995 土壤取样工具箱

This commercial item description covers brown kraft paper used for general wrapping applications.

SOIL SAMPLING KIT