G93 化工设备 标准查询与下载

NAVY MIL-L-81745 B (2)-1990 发射箱

This amendment forms a part of MIL-L-81745B, dated 26 September 1985, and is approved for use by the Naval Air Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.

LAUNCHER CONTAINER,"A" SIZE SONOBUOY LAU-126/A

JIS B 8235:1990 焊接式钢制液化碳氟化合物容器

Refillable welded steel gas cylinders for liquefied fluoro carbon

HG/T 3181-1989 高频电阻焊螺旋翅片管

本标准规定了由基管与钢带采用高频电阻焊制造的螺旋翅片管的制造、检验、验收。 本标准适用于石油化工、机械、冶金、轻工、食品等工业的钢制高频电阻焊螺旋翅片管。 翅片管的制造除应符合设计文件之外，还应符合本标准的规定。 Cr-Mo合金钢、不锈耐酸钢及耐热钢制翅片管除焊着率按设计文件规定外，其余应符合本标准的规定。

High frequency resistance welding spiral finned tube

HG/T 20671-1989 铅衬里化工设备

Lead Lined Chemical Equipment

HG 2952-1989 尿素二氧化碳汽提塔技术条件

本标准规定了尿素装置中尿素二氧化碳汽提塔的技术要求和检验规则。 本标准适用于壳程设计压力不大于2.85MPa、管程设计压力不大于16.27MPa、设计温度不高于225℃的超低碳奥氏体不锈钢衬里结构的尿素二氧化碳汽提塔。

Technical conditions of urea carbon dioxide stripper

ARMY MIL-S-51210 A (1)-1989 土壤取样工具箱

This amendment forms a part of MIL-S-S1210A(EA), dated 15 September 1976, and is approved for use by the US. Army Chemical Research, Development and Engineering Center, Department of the Army and is available for use by all Departments and Agencies of the Department of Defense.

SOIL SAMPLING KIT

DIN 28125-1:1989 第1部分:额定直径 DN 150 - DN 600 的圆形绞链式闸板.

The standard is to be used for round hinged covers of carbon steel, carbon with surface coating, and stainless steel for vessels and equipment that preferably serve process purposes.

DN 150 to DN 600 round hinged closures

QB/T 3673-1999 酒精蒸馏塔

本标准规定了酒精蒸馏塔的产品分类、技术要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于以淀粉质或糖蜜为原料的酒精蒸馏、废酒精回收的酒精蒸馏塔。

Alcohol Distillation Tower

NF E86-255:1989 贮存箱.气体油、轻质加热油和其它液体用容量为１，５００升及以上的钢制平行六面体地上储存箱

Storage tanks. Parallelepipedic steel tanks with a capacity of 1500 litres and more for above ground storage of gasoil, light heating oil and various liquids.

ARMY MIL-C-44216 A-1989 5夸特容量可折叠水箱

This specification covers a collapsible water canteen having a 5-quart capacity.

CANTEEN, WATER, COLLAPSIBLE, 5-QUART CAPACITY

NF E86-257:1989 立式可运输的容器.一般特性

Vertical transportable storage tanks. General characteristics.

DIN 28125-3:1989 具有保护环和表面涂层的圆形绞链式闸板.第3部分:额定直径 DN 500 和 DN 600

This standard is to be used for hinged covers of carbon steel with surface coating and protection ring for vessels and equipment that preferably serve process purposes.

Hinged covers; circular shape with protection ring and surface coated; DN 500 and DN 600

DIN 28125-2:1989 第2部分:椭圆形绞链式 350 mm x 450 mm 闸板

This standard is to be used for elliptical hinged covers 350 mm * 450 mm of carbon steel, carbon steel with surface coating, and stainless steel for vessels and equipment that preferably serve process purposes.

Hinged covers; elliptical, 350 mm 450 mm

HGJ 230-1989 乙烯装置裂解炉施工技术规程

Construction Technical Regulations for Cracking Furnace of Ethylene Plant

ARMY MIL-C-44217 A-1989 5夸特可折叠水箱罩

This specification covers one type and size of canteen cap.

CAP, WATER CANTEEN, 5-QUART, COLLAPSIBLE

DIN 28005-1:1988 容器的通用公差.第1部分:通用容器

This standard applies to dimensions without tolerance indication for vessels.

General tolerances for vessels; general-purpose vessels

BS 4485-2:1988 水冷却塔规范.第2部分:性能试验方法

Determination of the performance of industrial mechanical draught and natural draught towers.

Water cooling towers - Methods for performance testing

BS 4485-3:1988 水冷却塔规范.第3部分:热设计和功能设计惯例

Recommendations for the design of industrial and natural draught , and factory prefabricated towers.

Water cooling towers - Code of practice for thermal and functional design

ARMY MIL-C-14637 A VALID NOTICE 1-1988 葬礼用旗箱

This notice should be filed in front of MIL-C-14637A dated 1 September 1982.

CASE, FLAG, INTERMENT

DIN 28183:1988 管式热交换器.名称

The standard specifies terms and definitions for tubular heat exchangers.

Tubular heat exchangers; nomenclature