G93 化工设备 标准查询与下载

DIN 28185:1988 管式热交换器.管束部件

This standard applies to components in tube bundles of heat exchangers which are preferably used for process purposes.

Tubular heat exchangers; tube bundle components

DIN 28184-2:1988 端头固定的内管直径25、三角形管心距32的管式热交换器.管子的数量和排列图

The standard applies to tubular heat exchangers with two fixed heads, preferably used in process plants, with tubes and casing of unalloyed and stainless steels.

Fixed head heat exchangers with type 25 tubes and square 32 tube pitch; number and pattern of tubes

DIN 28184-1:1988 端头固定的内管直径25、三角形管心距32的管式热交换器.管子的数量和排列图

This standard applies to tubular heat exchangers with two fixed heads, preferably used in process plants, with tubes and casing of unalloyed and stainless steels.

Fixed head tubular heat exchangers with type 25 tubes and triangular 32 tube pitch; number and pattern of tubes

ARMY MIL-R-52255 D-1988 有可折叠式织物坦克.鼓式制动器和船的修理工具箱和维修工具

This specification covers repair kits anã repair kit camponentc required for field-type repairs to seal holes in collapcible fabric tanks, drums, and boats(see 6.1).

REPAIR KIT AND REPAIR KIT COMPONENTS, FOR COLLAPSIBLE FABRIC TANKS, DRUMS, AND BOATS

NF E09-501:1987 氯溶剂和氯氟溶剂洗涤机.总体设计.安装、使用和维护一般条件

CLEANING APPLIANCES USING CHLORINATED AND CHLORO-FLUORINATED SOLVANTS. GENERAL DESIGN. GENERAL CONDITIONS OF LAYOUT,USE AND MAINTENANCE.

DLA A-A-53071-1987 实验室烘箱

This commercial item description covers a bench mounted gravity convection oven with a +40 to +200 degrees centigrade (C) operating temperature range.

OVEN, LABORATORY

ARMY MIL-T-13918 D VALID NOTICE 1-1987 气门座环形镶装机工具箱

This commercial item description covers brown kraft paper used for general wrapping applications.

TOOL KIT, VALVE SEAT RING INSERTER

ARMY MIL-B-20100 C VALID NOTICE 1-1987 用于轻型武器的口径.腔及撞针孔的刷子和清洁器

MIL-E-20100C, dated 5 February 1973, has been reviewed and determined to be valid for use in acquisition.

BRUSHES, CLEANING, FOR BORE, CHAMBER AND FIRING PIN HOLE OF SMALL ARMS

DIN 28182:1987 管式热交换器.管心距、管薄板的钻孔直径.挡板和支承板

This standard applies to tubular heat exchangers with internal tubes, welded-in or rolled-in, from unalloyed or alloyed steels. It forms the fundation for the unification and interchangeability in the construction of heat exchangers.

Tubular heat exchangers; tube pitches, diameter of bores in tube sheets, baffles and support plates

NF E09-500:1987 使用氯化溶剂和氯氟化溶剂的洗涤设备.术语和分类

Cleaning appliances using chlorinated and chloro-fluorinated solvants. Terminology and classification.

ARMY MIL-C-43689 C-1987 2夸脱可折叠水箱罩(带桩壁)

This document covers one type and size of cover, for a collapsible canteen, made of olive green nylon duck and acrylic fiber pile with a cotton webbing sling.

COVER, WATER CANTEEN, 2-QUART, COLLAPSIBLE (WITH PILE LINING)

ARMY MIL-C-50705 VALID NOTICE 1-1987 10548700:箱子

MIL-C-S070S(AR), dated 18 Juli 1973, has been reviewed and determined to be valid for use in acquisition.

CHEST: 10548700

DIN 28127:1987 容器的半盘管套用的流量漏斗

This standard is to be used in connection with the standard on half-pipe joil jackets according to DIN 28128. The current funnels apply to a maximum allowable working pressure of 32/-1 bar at working temperatures up to 300 ?

Flow funnels for half-pipe coil jackets for vessels

DIN 28127 Bb.1:1987 容器上的半蛇形管套用流量漏斗.计算示例

Flow funnels for half-pipe coil jackets for vessels; example for calculation

HGJ 226-1987 管式炉安装工程施工及验收规范

Specifications for construction and acceptance of tube furnace installation engineering

HG/T 21619-1986 压力容器视镜 视镜

pressure vessel sight glass

HG/T 21620-1986 压力容器视镜 带颈视镜

Pressure vessel sight glass with neck sight glass

DIN 28015:1987 柱.板式柱和填充柱.可交换元件的主要部分和柱部分.结构尺寸

This standard applies to plate columns and packed columns of metallic materials and specifies the dimensions of the main section for exchange elements. These specifications allow uniform mounting dimensions for the fittings on the inside and provide equal initial dimensions for the process plant design.

Columns; plate column and packed column; main section, column section for exchange elements; dimensions

HG/T 3166-1986 碳钢衬F-46玻璃浮子液面计

F-46.lined carbon steel glassfloater level indicator

DIN 28050:1986 设备和容器.容许工作压力-0.2巴至0.1巴.交货技术条件

This standard is to be applied to metallic equipment and vessels used in process plants in which, due to the mode of operation, a pressure is present or can develop which is less than 0,1 bar ore more than - 0, bar.

Equipment and vessels; allowable working pressure -0,2 bar to 0,1 bar; technical delivery conditions