G95 橡胶、塑料用机械 标准查询与下载

DIN EN 1114-2:2010 橡胶机械和塑料机械.挤压机和挤压线.第2部分:模具型面压球机的安全性要求.德文版本EN 1114-2-1998+A1-2008

The document contains safety requirements for the design and construction of the following kinds of die face pelletisers used with extruders for pelletising of plastics and rubber: Underwater pelletisers, water ring pelletisers, dry pelletisers, centrifugal pelletisers, knife rotor pelletisers. Strand pelletisers are not subject to standard. They are dealt with in a separate standard being produced by CEN/TC 145/WG 6.

Plastics and rubber machines - Extruders and extrusion lines - Part 2: Safety requirements for die face pelletisers; German version EN 1114-2:1998+A1:2008

DIN EN 12012-4:2010 塑料和橡胶机械.粉碎机.第4部分:凝聚剂安全性要求.德文版本EN 12012-4-2006+A1-2008

This standard specifies the essential safety requirements applicable to the design and construction of agglomerators (sometimes called densifiers) used to densify plastic scrap, reducing its size and/or volume.

Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for agglomerators; German version EN 12012-4:2006+A1:2008

DIN EN 1114-3:2010 橡胶和塑料机械.挤压机和挤压线.第3部分:拉制的安全性要求.德文版本EN 1114-3-2001+A1-2008

In respect of the hazards listed in clause 4 and dealt with in clause 5, this European Standard contains safety requirements for the design and construction of the following kinds of haul-offs used in extrusion lines for processing plastics and rubber: - caterpillar haul-offs, - belt haul-offs, - capstan haul- offs, - belt capstan haul-offs, - roller haul-offs. The machine begins at the material inlet opening and ends at the material outlet.

Plastics and rubber machines - Extruders and extrusion lines - Part 3: Safety requirements for haul-offs; German version EN 1114-3:2001+A1:2008

ASTM D2115-10 聚(氯乙烯)合成物的烘箱热稳定性标准实施规程

Poly(vinyl chloride) compositions degrade by discoloration on prolonged exposure to heat. The degree of discoloration is related to the condition of exposure, such as length of period and temperature. When the conditions of exposure are fixed and controlled, then the relative resistance to discoloration due to heat of two or more compositions is able to be determined. The precision of heat stability testing is also dependent on the thickness of the specimens and the history of heat exposure prior to testing. This practice allows for control or the reporting of these variables. This practice is particularly applicable for determining gross differences in the heat stabilities of poly(vinyl chloride) compositions that are detectable as a color change. It is not intended to measure absolute thermal stability. Although the observed color changes may be evidence of degradation, molecular degradation phenomena such as chain-scission or cross-linking may not be identifiable. Note 28212;While discoloration caused by exposure to elevated temperature is commonly regarded as evidence of degradation in poly (vinyl chloride) compositions, it must be borne in mind that some vinyl compositions may undergo substantial change in color without appreciable loss of mechanical strength, chemical resistance, etc., whereas others may resist change in color yet undergo substantial change in other properties. Therefore, resistance to discoloration should not be taken as sole evidence of thermal stability. It is recommended that this test be supplemented by others such as tensile strength and elongation, impact strength, and deflection temperature under load (for rigid compositions), Durometer hardness (for nonrigid compositions), and dilute solution viscosity, and that the test results before and after oven exposure be compared to determine the degree of degradation which has been produced in each of the properties measured. This practice is able to predict the relative discoloration in processing, provided that the compositions in question are tested at the relative maximum temperatures developed in processing. This practice is not applicable to materials that will cross-contaminate during oven exposure.1.1 This practice lists procedures for determining the relative thermal stability of sheet or molded poly(vinyl chloride) compounds as indicated by discoloration due to exposure to an elevated temperature at controlled oven conditions. 1.2 A specimen preparation technique using a two-roll mill is provided for compositions that are not in molded or sheeted form. 1.3 This practice is not intended for use in purchasing specifications because the conditions of processing plastic compounds vary widely, and the degree of correlation of data obtained by this practice to process exposure has not been determined. However, despite this limitation, this practice does yield data of value in judging the comparative service quality of poly(vinyl chloride) compositions. 1.4 The values stated in SI units are to be regarded as the standard. The values in parentheses are given for information only. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Note 18212;This standard is similar in content, but not technically equivalent to ISO 305–1990.

Standard Practice for Oven Heat Stability of Poly(Vinyl Chloride) Compositions

HG/T 2150-2009 橡胶塑料压延机检测方法

本标准规定了橡胶塑料压延机的产品及安全要求检测条件、仪器和方法。 本标准适用于橡胶塑料压延机产品及安全要求的检测。

Measuring method of rubber calenders & plastics calenders

HG/T 3233-2009 垫带硫化机

本标准规定了垫带硫化机的基本参数、技术要求、安全要求、试验方法、检验规则等。 本标准适用于硫化垫带的液压式硫化机。

Flap curing press

HG/T 3110-2009 橡胶单螺杆挤出机

本标准规定了橡胶单螺杆挤出机的基本参数、技术要求、安全要求、耗电要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于橡胶单螺杆挤出机。 本标准不适用于橡胶销钉冷喂料挤出机。

Rubber single screw extruder

HG/T 3226.1-2009 轮胎成型机头.第1部分:折叠式机头

本标准规定了折叠式机头的术语和定义、型号与基本参数、要求、检验、检验规则、标志、包装、运输、贮存等要求。 本标准适用于成型机头外径小于2120mm、宽度小于3180mm的折叠式机头，包括鼓式、半鼓式、芯轮式和半芯轮式成型机头。

Tyre building drums.Part 1:Collapsible drums

HG/T 3230-2009 橡胶单螺杆挤出机检测方法

本标准规定了橡胶单螺杆挤出机主要检测项目的检测方法。 本标准适用于橡胶单螺杆挤出机的检测。 本标准应同HG/T 3110-2009《橡胶单螺杆挤出机》配合使用。 本标准不适用于橡胶销钉冷喂料挤出机

Rubber single screw extruder.Testing and measuring methods

HG/T 2148-2009 密闭式炼胶机炼塑机检测方法

本标准规定了密闭式炼胶机炼塑机的检测条件、仪器和方法。 本标准适用于一对具有一定形状的转子，间歇进行混炼或塑炼的密闭式炼胶机、炼塑机的检测。

Measuring method of rubber internal mixers & plastics internal mixers

HG/T 3232-2009 软边力车胎成型机

本标准规定了软边力车胎成型机的术语和定义、型号与基本参数、要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于成型自行车和手推车软边外胎的成型机。

Soft bead cycle tyre building machine

NF E63-600*NF EN 201:2009 塑料和橡胶机械.注塑机.安全要求

Plastics and rubber machines - Injection moulding machines - Safety requirements.

DIN EN 422:2009 塑料和橡胶机械.吹模机的安全要求,德文版本EN 422:2009

This European Standard covers essential health and safety requirements for the design of blow moulding machines for the processing of plastics. The significant hazards inherent in blow moulding machines are listed in Clause 4. This European Standard does not cover dip blow moulding machines. This European Standard does not cover hazards due to the use of fluorine or other toxic fluids. The safety requirements for the interaction between blow moulding machines and ancillary equipment are stipulated. The technical safety requirements for the design of this equipment are not covered. This European Standard does not cover the requirements for the design of the exhaust system. The European Standard does not cover noise hazards. This European Standard is not applicable to blow moulding machines which are manufactured before the date of its publication as an EN. A transition period until 28M/December 2009 is foreseen during which the manufacturer may choose to apply either this or the previous version of the standard.

Plastics and rubber machines - Blow moulding machines - Safety requirements; English version of DIN EN 422:2009-10

DIN EN 12013:2009 塑料和橡胶机械.密炼机.安全性要求(包括修改件A1-2008).英文版本DIN EN 12013-2009-09

This standard applies to internal mixers for rubber and plastics as defined in 3.1. The safety requirements and/or measures specified in this standard apply to all internal mixers irrespective of their size and irrespective of the control modes of the hopper front door and discharge door. The safety requirements for the design of exhaust systems and ancillary equipment are not covered by this standard. The safety requirements for the interaction between internal mixers and ancillary equipment are specified. This standard covers the significant hazards listed in Clause 4. This standard is not applicable to internal mixers which are manufactured before the date of publication of this standard by CEN.

Plastics and rubber machines - Internal mixers - Safety requirements (includes Amendment A1:2008) ;English version of DIN EN 12013:2009-09

DIN EN 1612-1:2009 塑料和橡胶机械.反应铸模机械.第1部分:计量和混合元件的安全性要求(包括修改件A1-2008).英文版本DIN EN 1612-1-2009-07

This standard specifies the health and safety requirements for the design of metering and mixing units for reaction moulding machines. The significant and specific hazards are listed in clause 4 and are dealt with in this standard. This standard does not cover completely the hazards arising from the use of highly flammable additives, for example, pentane used as a blowing agent (see 4.7), because these hazards depend to a large extent on the additives and processes used. This standard does not cover the hazards arising from the assembly of separate units not supplied at the same time by the same manufacturer. This standard does not cover the hazards arising from the movement of powered mixing heads; for these, see EN 1612-2. This standard applies to metering and mixing units manufactured after the date of publication of this standard.

Plastics and rubber machines - Reaction moulding machines - Part 1: Safety requirements for metering and mixing units (includes Amendment A1:2008); English version of DIN EN 1612-1:2009-07

BS EN 422:2009 塑料和橡胶机械.吹塑机.安全性要求

This European Standard covers essential health and safety requirements for the design of blow moulding machines for the processing of plastics. The significant hazards inherent in blow moulding machines are listed in Clause 4. This European Standard does not cover dip blow moulding machines. This European Standard does not cover hazards due to the use of fluorine or other toxic fluids. The safety requirements for the interaction between blow moulding machines and ancillary equipment are stipulated. The technical safety requirements for the design of this equipment are not covered. This European Standard does not cover the requirements for the design of the exhaust system. The European Standard does not cover noise hazards. This European Standard is not applicable to blow moulding machines which are manufactured before the date of its publication as an EN. A transition period until 29 December 2009 is foreseen during which the manufacturer may choose to apply either this or the previous version of the standard.

Plastics and rubber machines - Blow moulding machines - Safety requirements

DIN EN 289:2009 塑料机和橡胶机 压力机 安全要求

This document specifies the essential safety requirements for hydraulic presses, including toggle and hydro- mechanic ones, with a vertical closing movement more than 6 mm for the moulding of plastics and/or rubber. This document covers both compression moulding (see 3.1.1) and transfer moulding (see 3.1.2) All hazards listed in clause 4 are covered by this document The following machines are excluded -- injection moulding machines (see EN 201) -- presses for curing pneumatic tyres -- presses for curing inner tubes and curing bags -- hydraulic presses as covered by EN 693 -- mechanical presses as covered by EN 692 -- thermoforming machines (see EN 12409) -- RIM machines (see EN 1612-1 and EN 1612-2) The safety requirements for the additional hazards arising from the interaction between presses and ancillary equipment especially loading and unloading devices are specified. The safety requirements for the ancillary equipment itself are not specified. This document does not cover -- the requirements of Directive 94/9/CE concerning equipment and protective systems intended for use in potentially explosive atmospheres; -- requirements for the design of exhaust ventilation systems This document is not applicable to presses manufactured before the date of publication of this document by CEN.

Plastics and rubber machines - Presses - Safety requirements(includes Amendment A1:2008); English version of DIN EN 289:2009-06

EN 14382:2005+A1:2009 气体压力调节站和装置的安全装置.适用入口压力100帕以内的气体安全关闭装置

This document specifies constructional, functional, testing and marking requirements, sizing and documentation of gas safety shut-off devices used in the pressure regulating stations in accordance with EN 12186 or EN 12279.

Safety devices for gas pressure regulating stations and installations - Gas safety shut-off devices for inlet pressures up to 100 bar

HG/T 3227.1-2009 轮胎外胎模具.第1部分:活络模具

HG/T 3227的本部分规定了子午线轮胎外胎活络模具的术语和定义、分类、基本参数、型号编制方法、要求、检验方法、检验规则及判定，还给出了标志、标牌和使用说明书、包装运输和贮存的要求。 本部分适用于轿车、轻型载重汽车、载重汽车、工程机械子午线轮胎的外胎活络模具（以下简称模具）。也可适用于其他子午线轮胎外胎活络模具。

Mould for tyre covers-Part 1:Segmented mould

HG/T 3227.2-2009 轮胎外胎模具.第2部分:两半模具

HG/T 3227的本部分规定了轮胎外胎两半模具的术语和定义、分类、型号编制方法、要求、检验方法、检验规则及判定，还给出了标志、标牌及包装、运输和贮存的要求。 本部分适用于轿车、轻型载重汽车、载重汽车、农业机械、工业车辆、工程机械等轮胎外胎两半模具（以下简称模具）。 本部分不适用于摩托车轮胎、力车轮胎外胎模具。

Mould for tyre covers-Part 2:Two pieces mould