G95 橡胶、塑料用机械 标准查询与下载

NF E63-610:2008 塑料和橡胶机器.内部混合器.安全要求

Plastics and rubber machines - Internal mixers - Safety requirements.

NF E63-612-1/IN1:2008 塑料和橡胶机械.反应模塑机.第1部分:测量和混合设备的安全要求

Plastics and rubber machines - Reaction moulding machines - Part 1 : safety requirements for metering and mixing units.

NF E63-612-1:2008 橡胶和塑料机械.反应铸模机械.第1部分:计量和混合元件的安全要求

Plastics and rubber machines - Reaction moulding machines - Part 1 : safety requirements for metering and mixing units.

NF E63-606/IN1:2008 塑料和橡胶机械.冲压机.安全要求

Plastics and rubber machines - Presses - Safety requirements.

NF E63-606:2008 塑料和橡胶加工机械.压力机.安全要求

Plastics and rubber machines - Presses - Safety requirements.

JB/T 5438-2008 塑料机械.术语

本标准规定了有关塑料机械的术语和定义。 本标准适用于塑料机械行业在教学、科研、设计、制造、制修订标准、编写相关技术文件和书刊、及技术交流时使用。

Plastics machinery. Terminology

JB/T 10898-2008 塑料挤出复合膜辅机

本标准规定了塑料挤出复合膜辅机的基本参数、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于塑料挤出复合膜辅机（以下简称复膜机）。

Plastics extrusion laminate film accessory

JB/T 5419-2008 塑料挤出平膜扁丝辅机

本标准规定了塑料挤出平膜扁丝辅机的基本参数、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于塑料挤出平膜扁丝辅机（以下简称辅机）。

Plastics filature fiber extrusion accessory

JB/T 10899-2008 塑料挤出双壁波纹管辅机

本标准规定了塑料挤出双壁波纹管辅机（以下简称双壁管辅机）的术语、基本参数、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于与挤出机配套使用，能将挤出的熔体制成双壁波纹管的成型机械。本标准主要适用于塑料：聚烯烃（PE、PP）、硬聚氯乙烯（PVC-U）等。

Plastics double wall corrugated pipes extruder accessory

JB/T 5290-2008 塑料圆织机

本标准规定了塑料圆织机的基本参数、要求、试验方法、检验规则和标志、包装、运输和贮存。 本标准适用于塑料圆织机（以下简称圆织机）。

Plastics circular loom, plastics circular braider

JB/T 2627-2008 塑料挤出硬管辅机

本标准规定了塑料挤出硬管辅机的术语、基本参数、技术要求、试验方法和检验规则、标志、使用说明书、包装、运输和贮存。 本标准适用于与挤出机配套使用，能将挤出的熔体制成硬质塑料管的成型机械。

Plastics pipe extrusion accessory

DIN EN 14886:2008 塑料和橡胶机械.块状泡沫塑料用带刀切削机.安全要求

This European standard applies to machines that are designed specifically to cut, split or peel block foams to commercially required shapes, using a single or double cut. All hazards listed in clause 4 are covered by this document. Cutting of block foams may be by: -- vertical cutting; -- horizontal cutting; -- inclined cutting; -- transverse cutting; -- contour cutting; or -- a combination of the above. The material to be cut may be supported or transported by: -- a fixed table; -- a shuttle table; -- a conveyor; -- a turntable; -- rollers; -- mandrel; or -- a combination of the above. Cutting can be either manual or automatic. Cutting tools can be: -- smooth-edged or toothed bandknives; -- cutting wires. Movement of the cutting tool can be either oscillating or continuous in one direction. This European Standard does not apply to: -- laser and water jet cutting; -- hot wire cutting; -- wood, metal and food cutting machines. The safety requirements for the additional hazards arising from the interaction between bandknife cutting machines and ancillary equipment, especially loading and unloading devices, are specified. The safety requirements for the ancillary equipment itself are not specified. This European Standard covers machines used for cutting plastics and rubber having a cellular or compact structure. However, it may also be applied when these machines are used for cutting other materials, for example textiles, fibres and mineral wool, if cutting these materials does not create additional hazards. This document is not applicable to bandknife cutting machines manufactured before the date of its publication as an EN.

Plastics and rubber machines - Bandknife cutting machines for block foams - Safety requirements; English version of DIN EN 14886:2008-06

DIN EN 15067:2008 塑料和橡胶设备.袋子用薄膜加工机.安全要求

This European Standard specifies the safety requirements applicable to the design and construction of film converting machines for making bags and sacks, for the significant and specific hazards listed in Clause 4. This type of machine is based on the welding process. A film converting machine for bags and sacks starts at the film unwinding unit or at the film inlet when this machine is directly fed by an upstream process and ends at the product collection or delivery unit. The bag making line may include: 1 ) unwind units 2) slit-welding units 3) gussetting units 4) lane deviation units 5) perforating and welding or cutting and welding units 6) blocking units 7) pick-up and transfer units 8) stacking units 9) punching units 10) folding units 11 ) winding units 12) labelling or taping units 13) handle and closure units 14) draw tape insertion units 15) generators of electrostatic charge 16) electrostatic discharge equipment. Printing units, high frequency welding machines and the design and construction of electrostatic generators are not covered by this standard. Ultrasonic radiation hazards resulting from ultrasonic welding devices, e.g. integrated in handle and closure units, are not covered by this standard. Film converting machines for bags and sacks generally do not create explosive atmospheres. In principle they therefore correspond with line F of Table 2 of the ATEX Guideline and consequently do not fall within the scope of Directive 94/9/EC. This document is not applicable to machines which are manufactured before the date of its publication as EN.

Plastics and rubber machines - Film converting machines for bags and sacks - Safety requirements; English version of DIN EN 15067:2008-03

CEN EN 14886-2008_ 塑料和橡胶机械.块状泡沫塑料带型刀切削加工设备.安全要求

This European standard applies to machines that are designed specifically to cut, split or peel block foams to commercially required shapes, using a single or double cut. All hazards listed in clause 4 are covered by this document. Cutting of block foams may be by: ? vertical cutting; ? horizontal cutting; ? inclined cutting; ? transverse cutting; ? contour cutting; or ? a combination of the above. The material to be cut may be supported or transported by: ? a fixed table; ? a shuttle table; ? a conveyor; ? a turntable; ? rollers; ? mandrel; or ? a combination of the above. Cutting can be either manual or automatic. Cutting tools can be: ? smooth-edged or toothed bandknives; ? cutting wires. Movement of the cutting tool can be either oscillating or continuous in one direction. This European Standard does not apply to: ? laser and water jet cutting; ? hot wire cutting; ? wood, metal and food cutting machines. The safety requirements for the additional hazards arising from the interaction between bandknife cutting machines and ancillary equipment, especially loading and unloading devices, are specified. The safety requirements for the ancillary equipment itself are not specified. This European Standard covers machines used for cutting plastics and rubber having a cellular or compact structure. However, it may also be applied when these machines are used for cutting other materials, for example textiles, fibres and mineral wool, if cutting these materials does not create additional hazards. This document is not applicable to bandknife cutting machines manufactured before the date of its publication as an EN.

Plastics and rubber machines — Bandknife cutting machines for block foams — Safety requirements

BS EN 15067:2007 塑料和橡胶机械.袋子用薄膜吹炉冶炼机.安全要求

This European Standard specifies the safety requirements applicable to the design and construction of film converting machines for making bags and sacks, for the significant and specific hazards listed in Clause 4. This type of machine is based on the welding process. A film converting machine for bags and sacks starts at the film unwinding unit or at the film inlet when this machine is directly fed by an upstream process and ends at the product collection or delivery unit. The bag making line may include: 1) unwind units 2) slit-welding units 3) gussetting units 4) lane deviation units 5) perforating and welding or cutting and welding units 6) blocking units 7) pick-up and transfer units 8) stacking units 9) punching units 10) folding units 11) winding units 12) labelling or taping units 13) handle and closure units 14) draw tape insertion units 15) generators of electrostatic charge 16) electrostatic discharge equipment. Printing units, high frequency welding machines and the design and construction of electrostatic generators are not covered by this standard. Ultrasonic radiation hazards resulting from ultrasonic welding devices, e.g. integrated in handle and closure units, are not covered by this standard. Film converting machines for bags and sacks generally do not create explosive atmospheres. In principle they therefore correspond with line F of Table 2 of the ATEX Guideline and consequently do not fall within the scope of Directive 94/9/EC. This document is not applicable to machines which are manufactured before the date of its

Plastics and rubber machines - Film converting machines for bags and sacks - Safety requirements

DB44/T 461-2007 2008-04-01

本标准规定了精密塑料注射成型机的术语和定义、分类与命名、要求、试验方法、检验规则和标志、使用说明书、包装、运输和贮存。本标准适用于合模力不大于30 000kN的精密塑料注射成型机（以下简称“注塑机” ）.

Precision plastic injection moulding machine

NF E63-609-1:2007 橡胶和塑料机器.尺寸削减机器.第1部分:刀片粒化器的安全要求

Plastics and rubber machines - Size reduction machines - Part 1 : safety requirements for blade granulators.

DIN EN 12012-1:2007 塑料和橡胶机械.尺寸减小机械.第1部分:刀片造粒机的安全要求

This document specifies the essential safety requirements applicable to the design and construction of blade granulators used to reduce objects and materials made from plastics and rubber into granules. The machine begins with the outer edge of the feed opening, or feeding device if it is an integral part of the machine, and ends with the discharge area. Only the significant hazards listed in clause 4 and dealt with in clause 5 are subject to this document. This document does not deal with hazards caused by processing harmful materials. This document is not applicable to machines which are manufactured before the date of its publication as an EN.

Plastics and rubber machines - Size reduction machines - Part 1: Safety requirements for blade granulators; German version EN 12012-1:2007

BS EN 12012-1:2007 塑料和橡胶机械.粉碎机.刀片制粒机的安全要求

This document specifies the essential safety requirements applicable to the design and construction of blade granulators used to reduce objects and materials made from plastics and rubber into granules. The machine begins with the outer edge of the feed opening, or feeding device if it is an integral part of the machine, and ends with the discharge area. Only the significant hazards listed in clause 4 and dealt with in clause 5 are subject to this document. This document does not deal with hazards caused by processing harmful materials. This document is not applicable to machines which are manufactured before the date of its publication as an EN.

Plastics and rubber machines - Size reduction machines - Safety requirements for blade granulators

BS EN 12012-1:2007+A1:2008 塑料和橡胶机械.粉碎机.刀片制粒机的安全要求

This document specifies the essential safety requirements applicable to the design and construction of blade granulators used to reduce objects and materials made from plastics and rubber into granules. The machine begins with the outer edge of the feed opening, or feeding device if it is an integral part of the machine, and ends with the discharge area. Only the significant hazards listed in clause 4 and dealt with in clause 5 are subject to this document. This document does not deal with hazards caused by processing harmful materials. This document is not applicable to machines which are manufactured before the date of its publication as an EN.

Plastics and rubber machines - Size reduction machines - Safety requirements for blade granulators