G95 橡胶、塑料用机械 标准查询与下载

ANSI/SPI B151.1-2007 塑料机械.卧式喷射模塑机.制造、维护和使用的安全要求

The requirements of this standard shall apply to all HIMM's that process plastic materials and inject said material into a mold held closed by a horizontally acting clamp.

Plastics Machinery - Horizontal Injection Molding Machines - Safety Requirements for Manufacture, Care, and Use

ANSI B151.1-2007 水平注模机.制造、维护和使用的安全要求

The requirements of this standard shall apply to all HIMM's that process plastic materials and inject said material into a mold held closed by a horizontally acting clamp.

Horizontal Injection Molding Machines ?Safety Requirements for Manufacture, Care, and Use

DIN EN 12012-4:2007 塑料和橡胶机械.粉碎机.第4部分:电器除尘器的安全要求

This European Standard specifies the essential safety requirements applicable to the design and construction of agglomerators used to densify plastic scrap, reducing its size and/or volume. The limits of the agglomerator are as follows: - the outer edge of the feed opening, or outer edge of the fixed feed device (e.g. hopper) or the interface between the feed system (e.g. conveyor) and the agglomerator chamber and - the outer edge of the discharge opening of the agglomerator chamber or the interface betweem the agglomerator chamber and the discharge system. Only the significant hazards listed in Clause 4 and dealt with in Clause 5 are subject to this European Standard. This European Standard does not deal with hazards caused by processing materials (such as Expanded Polystyrene (EPS) and Polyurethane (PU) foam) which, when heated, may lead to a risk of fire and release of toxic gases. This European Standard does not deal with hazards caused by upstream and/or downstream equipment. This European Standard is not applicable to agglomerators manufactured before the date of its approval as EN.

Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for agglomerators; German version EN 12012-4:2006

JB/T 5291-2007 塑料破碎机

本标准规定了塑料破碎机的术语、基本参数、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于单轴旋转式塑料破碎机（简称破碎机）。 本标准不适用于立式塑料破碎机。

Plastic crusher

JB/T 5417-2007 塑料排气挤出机

本标准规定了单螺杆塑料排气挤出机（以下简称挤出机）的基本参数、要求、试验方法和检验规则、标志、包装、运输及贮存。 本标准适用于加工塑料制品或半成品的直接抽气式单螺杆挤出机。 本标准不适用于非直接抽气式单螺杆挤出机和多排气口大脱挥型等特殊排气挤出机。

Plastics vented extruder

NF E63-609-4:2007 塑料和橡胶工业机械.粉碎机.第4部分:凝聚剂的安全要求

Plastics and rubber machines - Size reduction machines - Part 4 : safety requirements for agglomerators.

BS EN 12012-4:2006+A1:2008 橡胶和塑料机械.粉碎机.第4部分:凝聚器安全要求

This European Standard specifies the essential safety requirements applicable to the design and construction of agglomerators used to densify plastic scrap, reducing its size and/or volume. The limits of the agglomerator are as follows:  the outer edge of the feed opening, or outer edge of the fixed feed device (e.g. hopper) or the interface between the feed system (e.g. conveyor) and the agglomerator chamber and  the outer edge of the discharge opening of the agglomerator chamber or the interface between the agglomerator chamber and the discharge system. Only the significant hazards listed in Clause 4 and dealt with in Clause 5 are subject to this European Standard. This European Standard does not deal with hazards caused by processing materials (such as Expanded Polystyrene (EPS) and Polyurethane (PU) foam) which, when heated, may lead to a risk of fire and release of toxic gases. This European Standard does not deal with hazards caused by upstream and/or downstream equipment. This European Standard is not applicable to agglomerators manufactured before the date of its approval as EN.

Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for agglomerators

BS EN 12012-4:2006 橡胶和塑料机械.粉碎机.电器除尘器的安全要求

This European Standard specifies the essential safety requirements applicable to the design and construction of agglomerators used to densify plastic scrap, reducing its size and/or volume. The limits of the agglomerator are as follows: ? the outer edge of the feed opening, or outer edge of the fixed feed device (e.g. hopper) or the interface between the feed system (e.g. conveyor) and the agglomerator chamber and ? the outer edge of the discharge opening of the agglomerator chamber or the interface between the agglomerator chamber and the discharge system. Only the significant hazards listed in Clause 4 and dealt with in Clause 5 are subject to this European Standard. This European Standard does not deal with hazards caused by processing materials (such as Expanded Polystyrene (EPS) and Polyurethane (PU) foam) which, when heated, may lead to a risk of fire and release of toxic gases. This European Standard does not deal with hazards caused by upstream and/or downstream equipment. This European Standard is not applicable to agglomerators manufactured before the date of its approval as EN.

Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for agglomerators

HG/T 3236-2006 橡胶机械用气动二位切断阀

本标准规定了橡胶机械用气动二位切断阀（以下简称切断阀）的产品型号、基本参数、结构、要求、试验方法、检验规则、标志、包装和贮存。 本标准适用于由气动薄膜执行机构或气动活塞执行机构和二通阀或三通阀组成的气功二位切断阀。

Pneumatic shut-off control valves for rubber machinery

HG/T 3119-2006 轮胎定型硫化机检测方法

本标准规定了机械式、液压式轮胎定型硫化机的检测项目、方法、示意图及仪器。 本标准适用于机械式、液压式轮胎定型硫化机（以下简称硫化机）的检测。

Testing and measuring methods for tyre shaping and curing press

HG/T 3235-2006 橡胶机械用气动二位四通滑阀

本标准规定了橡胶机械用气动二位四通滑阀（以下简称滑阀）的产品型号、基本参数、结构、要求、试验方法、检验规则、标志、包装和贮存。 本标准适用于由气动薄膜执行机构或气动活塞执行机械和四通阀组成的气动二位四通滑阀。

Pneumatic two-position four-way slide valve for rubber machinery

HG/T 3237-2006 橡胶机械用自力式压力调节阀

本标准规定了橡胶机械用自力式压力调节阀（以下简称调节阀）的产品型号、基本参数、结构、要求、试验方法、检验规则、标志、包装和贮存。 本标准适用于调节压力的自力式压力调节阀。

Self-operated pressure regulators for rubber machinery

DIN EN ISO 13802:2006 塑料.摆锤冲击试验机鉴定.却贝、艾卓德和拉伸冲击试验

This standard specifies methods for the verification of pendulum impact-testing machines used for the Charpy impact test, Izod impact test and tensile impact test described in ISO 179-1, ISO 180 and ISO 8256, respectively.#,,#

Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing (ISO 13802:1999, including Corrigendum 1:2000); English version of DIN EN ISO 13802:2006-06

JIS B 8650:2006 塑料制模机械.词汇

この規格は，プラスチックを成形加工するプラスチック加工機械のうち，押出成形機()，射出成形機()，ブロ—成形機()について，主としてカタログ・仕様書などに用いる用語及びその定義について規定する。ただし，押出成形機については，成形品によって成形機部分の構成が多様となるため，押出機本体及びそれに接続されるダイに限定して規定する。

Plastics moulding machinery -- Vocabulary

BS EN ISO 483:2006 塑料.使用水溶液进行调节和试验保持恒定湿度的小型密封容器

This International Standard establishes guidelines for the construction and use of enclosures with volumes less than 200 dm3, in order to obtain atmospheres of constant relative humidity at given temperatures, using saturated aqueous salt solutions, glycerol/water solutions or sulfuric acid/water solutions, for conditioning and testing plastics. It specifies the procedures to be followed to maintain the relative humidities of the conditioning and testing atmospheres within the required tolerances, at the temperatures specified by particular International Standards. The procedures described are intended for conditioning small quantities of materials prior to test, and for such tests as may be carried out entirely within a small enclosure, e.g. electrical tests. The guidelines described do not apply to enclosures requiring frequent opening.

Plastics - Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at constant value

HG/T 3800-2006 橡胶双螺杆挤出压片机

Rubber twin screw extrusion tablet press

HG/T 3801-2005 橡胶双螺杆挤出压片机检测方法

本标准规定了橡胶双螺杆挤出压片机检测方法。 本标准适用于橡胶双螺杆挤出压片机（以下简称挤出压片机）的检验。 本标准与HG/T 3800-2005《橡胶双螺杆挤出压片机》产品标准配合使用。

Testing and measuring methods for twin-screw extruder of rubber

HG/T 3800-2005 橡胶双螺杆挤出压片机

本标准规定了橡胶双螺杆挤出压片机的系列、基本参数、技术要求、安全要求、试验方法与检验规则、标志和包装等。 本标准适用于橡胶双螺杆挤出压片机（以下简称挤出压片机）

Twin-screw sxtruder of rubber

HG/T 2073-2005 阿克隆磨耗机技术条件

本标准规定了阿克隆磨耗机的结构与特征、技术要求、试验方法与检验规则、标志和包装等。 本标准适用于阿克隆磨耗机（以下简称磨耗机）。

Technical specifications for Akron wearing test machine

HG/T 3799-2005 销钉机筒冷喂料挤出机 检测方法

本标准规定了销钉机筒冷喂料挤出机的主要检测项目的检测方法。 本标准适用于销钉机筒冷喂料挤出机的检测。 本标准应同HG/T 3798-2005《销钉机筒冷喂料挤出机》配合使用。

Pin-barrel cold-feed extruder. Testing and measuring methods