H12 轻金属及其合金分析方法 标准查询与下载

YS/T 535.4-2006 氟化钠化学分析方法 邻二氮杂菲光度法测定铁量

Sodium fluoride chemical analysis method o-phenanthrene spectrophotometric determination of iron content

YS/T 535.3-2006 氟化钠化学分析方法 钼蓝光度法测定硅量

Method for chemical analysis of sodium fluoride Molybdenum blue photometric method for determination of silicon content

YS/T 535.2-2006 氟化钠化学分析方法 蒸馏-硝酸钍容量法测定氟量

Method for chemical analysis of sodium fluoride Distillation-thorium nitrate volumetric method for determination of fluorine content

YS/T 535.1-2006 氟化钠化学分析方法 重量法测定湿存水量

Sodium fluoride chemical analysis method gravimetric determination of wet storage

YS/T 534.5-2006 氢氧化铝化学分析方法 氧化钠含量的测定

Determination of sodium oxide content by chemical analysis method of aluminum hydroxide

YS/T 534.3-2006 氢氧化铝化学分析方法 钼蓝光度法测定二氧化硅含量

Aluminum Hydroxide Chemical Analysis Method Molybdenum Blue Photometric Determination of Silica Content

YB/T 5325-2006 黄血盐钠含量的测定方法

Determination method of yellow blood salt sodium content

KS D ISO 7242:2006 轻金属和铝合金的化学分析.实验室间的试验结果的统计分析

이 규격은 가장 간단한 실행 가능한 방법으로 통계적 검증의 수치적 결과를 설명하려는 것과

Chemical analysis of light metals and their alloys－Statistical interpretation of inter-laboratory trials

KS D ISO 1178:2005 镁合金.可溶性锆的测定.茜素磺酸盐光度法

이 규격은 마그네슘 합금 중 합금 원소로 포함된 가용성 지르코늄을 정량하는 알리자린술 폰산

Magnesium alloys－Determination of insoluble zirconium－Alizarin sulphonate photometric method

KS D ISO 5196-1:2005 镁合金.钍的测定.第1部分:重量分析法

이 규격은 마그네슘 합금 중의 토륨을 정량하기 위한 무게 분석법에 대하여 규정한다.이

Magnesium alloys－Determination of thorium－Part 1：Gravimetric method

KS D ISO 2354:2005 镁合金.不溶性锆的测定.茜素磺酸盐光度法

이 규격은 마그네슘 합금 중에 합금 원소로 포함된 불용성 지르코늄의 정량을 측정하는 알 리

Magnesium alloys－Determination of insoluble zirconium－Alizarin sulphonate photometric method

NF A06-590:2005 铝和铝合金.化学分析.闪光光学发射光谱分析指南

Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis.

DIN EN 14726:2005 铝和铝合金.化学分析.闪光光发射光谱分析指南.德文版本 EN 14726-2005

This European Standard gives guidance on the criteria and the fundamental operation procedure governing the spark optical emission spectral analysis (S-OES) of metal samples, beginning with sampling, through sample preparation to reporting the test, as well as the requirements of the whole spark source spectrometric procedure which shall be fulfilled with respect to: -- observance of the agreed precision and trueness [ISO 3534-1, ISO 5725-1] of the analytical results with refer- ence to the agreed sample or sample area; -- traceability of the analytical results to the international base units -- mass (kg) and amount of substance (mol); -- proof of agreement between the spark spectrometric result and the average composition of the supplied metal sample within the given uncertainty [ISO 3534-1] of the analytical result; -- comparability of the test results between different laboratories; -- as far as possible, a trouble-free operation of the spark, spectrometer. These guidelines refer to computer-controlled simultaneously measuring spectrometers for the analysis of solid samples.

Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis; English version of DIN EN 14726:2005

KS D 1852-2005 铝和铝合金光电子发射光谱化学分析方法

이 규격은 알루미늄 및 알루미늄 합금의 광전 측광법에 따른 방출 분광 분석 방법에 대하여

Methods for photoelectric emission spectrochemical analysis of aluminium and aluminium alloys

SANS 50755-2:2005 铝及铝合金.挤压棒材/条材、管材、型材.第2部分:机械性能

Specifies the mechanical property limits applicable to aluminium and aluminium alloy extruded rod/bar, tube and profile.

Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles Part 2: Mechanical properties

JIS H 1305:2005 铝和铝合金的光发射光谱分析法

この規格は,アルミニウム及びアルミニウム合金のアルゴン雰囲気放電発光スタンド付発光分光分析方法について規定する。この規格は,表1の成分の定量に適用する。 なお,アルミニウム及びアルミニウム合金の大気放電発光スタンド付発光分光分析方法については，附属書による。

Method for optical emission spectrochemical analysis of aluminium and aluminium alloys

DIN EN 12441-10:2005 锌及锌合金.化学分析.第10部分:锌合金中铬和钛的测定.分光光度法

This document specifies a spectrophotometric method for the determination of chromium and titanium in zinc alloys. It is applicable to the products specified in EN 988, EN 1774 and EN 12844. It is suitable for the determination of chromium and titanium contents (mass fractions) between 0,05 % and 0,50 %.#,,#

Zinc and zinc alloys - Chemical analysis - Part 10: Determination of chromium and titanium in zinc alloys - Spectrophotometric method; German version EN 12441-10:2004

DIN EN 12441-9:2005 锌及锌合金.化学分析.第9部分:锌合金中镍的测定.火焰原子吸收光谱法

This document specifies a flame atomic absorption spectrometric method for the determination of nickel in zinc alloys. It is applicable to the products specified in EN 1774 and EN 12844. It is suitable for the determination of nickel contents (mass fractions) between 0,000 5 % and 0,020 %.

Zinc and zinc alloys - Chemical analysis - Part 9: Determination of nickel in zinc alloys - Flame atomic absorption spectrometric method; German version EN 12441-9:2004

DIN EN 12441-8:2005 锌及锌合金.化学分析.第8部分:二级锌中锡的测定.火焰原子吸收光谱法

This European Standard specifies an analytical method for the determination of tin in secondary zinc by atomic absorption spectrometry. It is applicable to the products specified in EN 13283. It is suitable for the determination of tin mass between 0,1 % and 1,0 %.

Zinc and zinc alloys - Chemical analysis - Part 8: Determination of tin in secondary zinc - Flame atomic absorption spectrometric method; German version EN 12441-8:2004

DIN EN 12441-7:2005 锌及锌合金.化学分析.第7部分:锡的测定.萃取后的火焰原子吸收光谱法

Zinc and zinc alloys - Chemical analysis - Part 7: Determination of tin - Flame atomic absorption spectrometric method after extraction; German version EN 12441-7:2004