H12 轻金属及其合金分析方法 标准查询与下载

KS D ISO 5194:2001 铝和铝合金.锌含量的测定.火焰原子吸收光谱测定法

이 규격은 알루미늄 및 알루미늄합금 중의 아연 분석 방법에 대한 불꽃 원자 흡수 분광법에

Aluminium alloys－Determination of zinc－Flame atomic absorption spectrometric method

KS D ISO 810:2001 镁和镁合金.锰含量的测定.高碘酸盐光度法(锰含量小于0.01%)

이 규격은 지르코늄이나 희토류 혹은 토륨을 포함하지 않는 마그네슘 및 마그네슘 합금 중의

Magnesium and magnesium alloys－Determination of manganese－Periodate photometric method(Manganese content less than 0.01 %)

KS D ISO 809:2001 镁和镁合金.锰含量的测定.高碘酸盐光度法(锰含量为0.01%—0.8%)

이 규격은 지르코늄이나 희토류 혹은 토륨을 포함하지 않는 마그네슘 및 마그네슘합금 중의 망

Magnesium and magnesium alloys－Determination of manganese－Periodate photometric method(manganese content between 0.01 and 0.8 %)

KS D ISO 2353:2001 镁和镁合金.含锆、稀土、钍和银的镁合金中锰的测定.高碘酸盐光度法

이 규격은 지르코늄, 희토류 원소, 토륨, 은을 포함하는 마그네슘 합금에서 망가니즈의 측정

Magnesium and its alloys－Determination of manganese in magnesium alloys containing zirconium, rare earths, thorium and silver－Periodate photometric method

KS D 2025-2001 镁合金中镁含量测定方法

이 규격은 마그네슘합금의 망가니즈 분석 방법에 대하여 규정한다.

Determination of manganese in magnesium alloys

KS D 1870-2001 铝和铝合金中钛含量的测定方法

이 규격은 알루미늄 및 알루미늄합금의 티타늄 분석 방법에 대하여 규정한다.

Determination of titanium in aluminium and aluminium alloys

KS D 8310-2001 铝及其合金的阳极氧化.阳极氧化物镀层单位面积质量(表面密度)的测定方法

이 규격은 알루미늄 및 알루미늄합금의 제품(이하 제품이라 한다.)에 입힌 양극 산화 피막

Anodizing of aluminium and its alloys－Determination of mass per unit area(surface density) of anodic oxide coatings(gravimetric method) and determination of thickness of anodic oxide coatings(non-destructive measurement by split-beam microscope)

KS D 8314-3-2001 铝和铝合金的阳极氧化涂层的耐磨性试验方法.第3部分:落砂磨损阻力试验

이 규격은 알루미늄 및 알루미늄합금의 제품(1)(이하, 제품이라 한다.)에 실시한 양극 산

Test methods for abrasion resistance of anodic oxide coatings on aluminium and aluminium alloys －Part 3：Sand-falling abrasion resistance test

KS D 8314-2-2001 铝和铝合金的阳极氧化涂层的耐磨性试验方法.第2部分:磨料射流测试

이 규격은 알루미늄 및 알루미늄합금의 제품(이하 제품이라 한다.)에 실시한 5&##6

Test methods for abrasion resistance of anodic oxide coatings on aluminium and aluminium alloys－Part 2：Abrasive jet test

KS D 0231-2001 电镀镉层

This Korean Industrial Standard specifies electroplated coatings(1) (hereafter referred to as "coatings") of cadmium on the significant surface(2) of iron or steel basis metal for the purpose of preventing corrosion. Notes (1) The surface of the parts which is plated or to be plated and for which the coating is essential for performance and appearance. (2) When chromate conversion coatings are applied for the purpose of preventing corrosion, the procedures shall conform to KS D 8350.

Electroplated coatings of cadmium on steel

ARMY JAN-M-454 VALID NOTICE 1-2000 镁铝合金.粉末

JAN-M454(11, dated 15 February 1952, has been reviewed and determined to be valid for use in acquisition.

MAGNESIUM-ALUMINUM ALLOY, POWDERED

JIS H 1334:1999 镁及镁合金中锰的测定方法

この規格は，マグネシウム及びマグネシウム合金中のマンガン定量方法について規定する。

Methods for determination of manganese in magnesium and magnesium alloys

JIS H 1332:1999 镁及镁合金中铝的测定方法

この規格は，マグネシウム及びマグネシウム合金中のアルミニウム定量方法について規定する。

Methods for determination of aluminium in magnesium and magnesium alloys

JIS H 1333:1999 镁及镁合金中锌的测定方法

この規格は，マグネシウム及びマグネシウム合金中の亜鉛定量方法について規定する。

Methods for determination of zinc in magnesium and magnesium alloys

JIS H 1338:1999 镁及镁合金中铁的测定方法

この規格は，マグネシウム及びマグネシウム合金中の鉄定量方法について規定する。

Methods for determination of iron in magnesium and magnesium alloys

JIS H 1337:1999 镁及镁合金中镍的测定方法

この規格は，マグネシウム及びマグネシウム合金中のニッケル定量方法について規定ずる。

Method for determination of nickel in magnesium and magnesium alloys

JIS H 1336:1999 镁及镁合金中铜的测定方法

この規格は,マグネシウム及びマグネシウム合金中の銅定量方法について規定する。

Methods for determination of copper in magnesium and magnesium alloys

JIS H 1356:1999 铝及铝合金中锌的测定方法

この規格は,アルミニウム及びアルミニウム合金中の亜鉛定量方法について規定する。

Method for determination of zinc in aluminium and aluminium alloys

JIS H 1357:1999 铝及铝合金中镁含量测定方法

この規格は，アルミニウム及びアルミニウム合金中のマグネシウム定量方法について規定する。備考この規格の対応国際規格を，次に示す。

Methods for determination of magnesium in aluminium and aluminium alloys

JIS H 1353:1999 铝及铝合金中铁的测定方法

この規格は，アルミニウム及びアルミニウム合金中の鉄定量方法について規定する。

Methods for determination of iron in aluminium and aluminium alloys