H12 轻金属及其合金分析方法 标准查询与下载

ASTM F1593-97(2002) 应用高质量分辩率辉光放电质谱计测定电子级铝中微量金属杂质的标准试验方法

This test method is intended for application in the semiconductor industry for evaluating the purity of materials (for example, sputtering targets, evaporation sources) used in thin film metallization processes. This test method may be useful in additional applications, not envisioned by the responsible technical committee, as agreed upon by the parties concerned. This test method is intended for use by GDMS analysts in various laboratories for unifying the protocol and parameters for determining trace impurities in pure aluminum. The objective is to improve laboratory to laboratory agreement of analysis data. This test method is also directed to the users of GDMS analyses as an aid to understanding the determination method, and the significance and reliability of reported GDMS data. For most metallic species the detection limit for routine analysis is on the order of 0.01 weight ppm. With special precautions detection limits to sub-ppb levels are possible. This test method may be used as a referee method for producers and users of electronic-grade aluminum materials.1.1 This test method covers measuring the concentrations of trace metallic impurities in high purity aluminum. 1.2 This test method pertains to analysis by magnetic-sector glow discharge mass spectrometer (GDMS). 1.3 The aluminum matrix must be 99.9 weight % (3N-grade) pure, or purer, with respect to metallic impurities. There must be no major alloy constituent, for example, silicon or copper, greater than 1000 weight ppm in concentration. 1.4 This test method does not include all the information needed to complete GDMS analyses. Sophisticated computer-controlled laboratory equipment skillfully used by an experienced operator is required to achieve the required sensitivity. This test method does cover the particular factors (for example, specimen preparation, setting of relative sensitivity factors, determination of sensitivity limits, etc.) known by the responsible technical committee to affect the reliability of high purity aluminum analyses.

Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum by High Mass-Resolution Glow-Discharge Mass Spectrometer

ASTM E1937-97 用惰性气体熔融技术测定钛和钛合金中氮含量的标准试验方法

1.1 This test method provides a procedure for the determination of nitrogen in titanium and titanium alloys in concentrations from 0.007 to 0.11%. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Determination of Nitrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Technique

ASTM D6208-97 通过电流静态测量对铝及其合金折回潜力测定的标准试验方法

1.1 A procedure to determine the repassivation potential of aluminum alloy 3003-H14 (UNS A93003) (1) as a measure of relative susceptibility to pitting corrosion by conducting a galvanostatic polarization is described. A procedure that can be used to check experimental technique and instrumentation is described, as well.1.2 The test method serves as a guide for similar measurement on other aluminum alloys and metals (2-5).1.3 The values stated in SI units are to be regarded as the standard. Values given in parentheses are for information only.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Repassivation Potential of Aluminum and Its Alloys by Galvanostatic Measurement

ASTM F1593-97 应用高质量分辩率辉光放电质谱计测定电子级铝中微量金属杂质的标准试验方法

1.1 This test method covers measuring the concentrations of trace metallic impurities in high purity aluminum. 1.2 This test method pertains to analysis by magnetic-sector glow discharge mass spectrometer (GDMS). 1.3 The aluminum matrix must be 99.9 weight % (3N-grade) pure, or purer, with respect to metallic impurities. There must be no major alloy constituent, for example, silicon or copper, greater than 1000 weight ppm in concentration. 1.4 This test method does not include all the information needed to complete GDMS analyses. Sophisticated computer-controlled laboratory equipment skillfully used by an experienced operator is required to achieve the required sensitivity. This test method does cover the particular factors (for example, specimen preparation, setting of relative sensitivity factors, determination of sensitivity limits, etc.) known by the responsible technical committee to affect the reliability of high purity aluminum analyses.

Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum by High Mass-Resolution Glow-Discharge Mass Spectrometer

KS D 8315-1996 铝及其合金的阳极氧化镀层封孔质量评定方法

이 규격은 알루미늄 및 알루미늄합금의 제품에 입힌 양극 산화 피막의 봉공도 시험 방법에 대

Test methods for sealing quality of anodic oxide coatings on aluminium and aluminium alloys

HB 7266.1-1996 铝锂合金化学成分分析方法 电感耦合等离子体原子发射光谱法测定Cu、Fe、Li、Mg、Si、Zr含量

本标准规定了采用电感耦合等离子体原子发射光谱法测定铝锂合金中Cu、Fe、Li、Mg、Si、Zr含量的方法原理、试剂、仪器、分析步骤、分析结果的计算及允许差。 　　本标准适用于铝锂合金中Cu、Fe、Li、Mg、Si、Zr含量的测定。

Determination of Cu, Fe, Li, Mg, Si, Zr content by inductively coupled plasma atomic emission spectrometry for chemical composition analysis of aluminum-lithium alloy

HB 7266.4-1996 铝锂合金化学成分分析方法 原子吸收光谱法测定铁含量

本标准规定了采用原子吸收光谱法测定铝锂合金中铁含量的方法原理、试剂、仪器、分析步骤、分析结果的计算和允许差。 　　本标准适用于铝锂合金中铁含量的测定。

Analytical methods for chemical composition of aluminum-lithium alloys Determination of iron content by atomic absorption spectrometry

HB 7266.5-1996 铝锂合金化学成分分析方法 原子吸收光谱法测定铜含量

本标准规定了采用原子吸收光谱法测定铝锂合金中铜含量的方法原理、试剂、仪器、分析步骤、分析结果的计算和允许差。 　　本标准适用于铝锂合金中铜含量的测定。

Analytical method of chemical composition of aluminum-lithium alloy Determination of copper content by atomic absorption spectrometry

HB 7266.6-1996 铝锂合金化学成分分析方法 原子吸收光谱法测定镁含量

本标准规定了采用原子吸收光谱法测定铝锂合金中镁含量的方法原理、试剂、仪器、分析步骤、分析结果的计算和允许差。 　　本标准适用于铝锂合金中镁含量的测定。

Analytical method for chemical composition of aluminum-lithium alloy Determination of magnesium content by atomic absorption spectrometry

HB 7266.2-1996 铝锂合金化学成分分析方法 原子吸收光谱法测定锂含量

本标准规定了采用原子吸收光谱法测定铝锂合金中锂含量的方法原理、试剂、仪器、分析步骤、分析结果的计算和允许差。 　　本标准适用于铝锂合金中锂含量的测定。

Analytical method for chemical composition of aluminum-lithium alloy Determination of lithium content by atomic absorption spectrometry

HB 7266.7-1996 铝锂合金化学成分分析方法 硅钼蓝光度法测定硅含量

本标准规定了采用硅钼兰光度法测定铝锂合金中硅含量的方法原理、试剂、仪器、分析步骤、分析结果的计算和允许差。 　　本标准适用于铝锂合金中硅含量的测定。

Analytical method for chemical composition of aluminum-lithium alloy Determination of silicon content by silicon-molybdenum blue photometry

HB 7266.8-1996 铝锂合金化学成分分析方法 槲皮素光度法测定溶解锆含量

本标准规定了采用槲皮素光度法测定铝锂合金中溶解锆含量的方法原理、试剂、仪器、分析步骤、分析结果的计算和允许差。 　　本标准适用于铝锂合金中溶解锆含量的测定。

Analytical Method for Chemical Composition of Aluminum-Lithium Alloy Quercetin Spectrophotometric Determination of Dissolved Zirconium Content

HB 7266.3-1996 铝锂合金化学成分分析方法 原子吸收光谱法测定钾、钠含量

本标准规定了采用原子吸收光谱法测定铝锂合金中钾、钠含量的方法原理、试剂、仪器、分析步骤、分析结果的计算和允许差。 　　本标准适用于铝锂合金中钾、钠含量的测定。

Analytical methods for chemical composition of aluminum-lithium alloys Determination of potassium and sodium content by atomic absorption spectrometry

JIS H 1321:1996 镁金属的化学分析方法

Methods for chemical analysis of magnesium metal

BOCA CHAPTER 20 NBC-1996 轻金属

The BOCA National Mechanical Code was initially prepared and updated on the premise that adequate code requirements are essential to the safe installation and maintenance of all mechanical equipment and systems in order to protect the public health, sa

Lightweight Metals

NF A08-331*NF EN ISO 10700:1995 钢铁.锰含量的测定.火焰原子吸收分光光度计法

Steel and iron. Determination of manganese content. Flame atomic absorption spectrophotometric method.

BS EN 2536:1995 铝合金的硬阳极氧化

This standard specifies the hard anodizing of aluminium alloys used in aerospace construction. It shall be applicable whenever referenced.

Hard anodizing of aluminium alloys

YS/T 89-1995 煅烧α型氧化铝

Calcined α-alumina

JIS H 1353:1994 铝及铝合金中的铁含量测定方法

Methods for determination of iron in aluminium and aluminium alloy

JIS H 1336:1994 镁合金中的铜含量测定方法

Methods for determination of copper in magnesium alloys