H12 轻金属及其合金分析方法 标准查询与下载

JIS H 1362:1994 铝和铝合金中钒含量的测定方法

この規格は,アルミニウム及びアルミニウム合金中のバナジウム定量方法について規定する。

Method for determination of vanadium in aluminium and aluminium alloys

ASTM E34-94(2002) 铝和铝基合金化学分析的标准试验方法

These test methods for the chemical analysis of metals and alloys are primarily intended to test such materials for compliance with compositional specifications. It is assumed that all who use these test methods will be trained analysts capable of performing common laboratory procedures skillfully and safely. It is expected that work will be performed in a properly equipped laboratory. Note8212;Shaded areas are suitable for sampling. FIG. 1 Type A and Type B Disks1.1 These test methods cover the chemical analysis of aluminum and aluminum-base alloys having compositions within the following limits:Beryllium, ppm0.3 to 100Bismuth, %0.02 to 1.0Boron, %0.005 to 0.060Cadmium, %0.001 to 0.50Chromium, %0.01 to 1.0Copper, %0.01 to 20.0Gallium, %0.001 to 0.05Iron, %0.01 to 3.0Lead, %0.01 to 1.0Lithium, %0.001 to 4.0Magnesium, %0.002 to 12.0Manganese, %0.005 to 2.0Nickel, %0.01 to 4.0Silicon, %0.05 to 20.0Tin, %0.03 to 1.0Titanium, %0.002 to 0.30Vanadium, %0.002 to 0.16Zinc, %0.003 to 12.0Zirconium, %0.01 to 0.301.2 The analytical procedures appear in the following order:SectionsBeryllium by Argon Plasma Optical Emission Spectroscopy283 to 292Beryllium by the Morin (Fluorometric) Test Method8-19Bismuth by the Thiourea (Photometric) Method1aBismuth and Lead by the Atomic Absorption Test Method188 to 198Boron by the Carmine (Photometric) Test Method30 to 38Cadmium by the Atomic Absorption Test Method167 to 177Chromium:Diphenylcarbazide (Photometric) Test Method39 to 47Persulfate Oxidation (Titrimetric) Test Method1bChromium by the Atomic Absorption Test Method199 to 209Copper and Lead by the Electrolytic (Gravimetric) Test Method1cCopper and Zinc by the Atomic Absorption Test Method210 to 220Copper by the Electrolytic (Gravimetric) Test Method303 to 311Copper by the Neocuproine (Photometric) Test Method1aGallium by the Ion Exchange-Atomic Absorption Test Method312 to 323Iron by the 1,10-Phenanthroline (Photometric) Method73 to 81Iron and Manganese by the Atomic Absorption Method221 to 231Lithium by the Atomic Absorption Test Method324 to 334Magnesium:Pyrophosphate (Gravimetric) Method1 bEthylenediamine Tetraacetate (Titrimetric) TestMethod88 to 93Magnesium by the Atomic Absorption Test Method232 to 242Manganese by the Periodate (Photometric) Test Method 293 to 302Nickel:Dimethylglyoxime (Photometric) Test Method1......

Standard Test Methods for Chemical Analysis of Aluminum and Aluminum-Base Alloys

KS D 2022-1993 镁合金的化学分析方法通则

이 규격은 아래에 열거한 한국산업규격에 규정된 마그네슘합금 분석 방법 중 공통적인 일반 사

General rules for chemical analysis of magnesium alloys

NF A06-652:1993 钛合金的化学分析.Ti-AI-V合金中铝含量的测定.EDTA滴定法

Chemical analysis of titanium alloys. Determination of aluminium content in Ti-AI-V alloy. Titrimetric method with EDTA.

JIS H 1338:1993 镁合金中的铁含量测定方法

Methods for determination of iron in magnesium alloys

JIS H 1354:1993 铝及铝合金中的铜含量测定方法

Methods for determination of copper in aluminium and aluminium alloys

NAVY MIL-A-8625 F-1993 铝及铝合金阳极涂层

This specification covers the requirements for SIX types and two classes of electrolyticallyformed anodic coatings on aluminum and aluminum alloys for non-architecturalapplications (see 6.1).

ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS

JIS H 1307:1993 铝和铝合金的感应耦合离子体发射光谱的分析法

この規格は，アルミニウム及びアルミニウム合金の誘導結合プラズマ発光分光分折方法について規定する。

Methods for inductively coupled plasma emission spectrometric analysis of aluminium and aluminium alloys

BOCA CHAPTER 20 NBC COMM V2-1993 轻金属

The BOCA National Mechanical Code was initially prepared and updated on the premise that adequate code requirements are essential to the safe installation and maintenance of all mechanical equipment and systems in order to protect the public health, sa

Lightweight Metals

BOCA CHAPTER 20 NBC-1993 轻金属

The BOCA National Mechanical Code was initially prepared and updated on the premise that adequate code requirements are essential to the safe installation and maintenance of all mechanical equipment and systems in order to protect the public health, sa

Lightweight Metals

ASTM B449-93(2010)e1 铝的铬酸盐处理标准规范

1.1 This specification covers the requirements relating to rinsed and nonrinsed chromate conversion coatings on aluminum and aluminum alloys intended to give protection against corrosion and as a base for other coatings. This edition of the specification has been coordinated with ISO/DIS 10546 and is technically equivalent. 1.2 Aluminum and aluminum alloys are chromate coated in order to retard corrosion; as a base for organic films including paints, plastics, and adhesives; and as a protective coating having a low electrical contact impedance. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Chromates on Aluminum

ASTM B449-93(2015) 铝表面铬酸盐的标准规格

1.1 This specification covers the requirements relating to rinsed and nonrinsed chromate conversion coatings on aluminum and aluminum alloys intended to give protection against corrosion and as a base for other coatings. This edition of the specification has been coordinated with ISO/DIS8201;10546 and is technically equivalent. 1.2 Aluminum and aluminum alloys are chromate coated in order to retard corrosion; as a base for organic films including paints, plastics, and adhesives; and as a protective coating having a low electrical contact impedance. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Chromates on Aluminum

JIS H 1306:1992 铝和铝合金原子吸收光谱分析方法

Methods for atomic absorption spectrometric analysis of aluminium and aluminium alloys

JIS H 1355:1992 铝和铝合金中镁的测定方法

Methods for determination of manganese in aluminium and aluminium alloys

NF A06-651:1992 钛及钛合金的化学分析.氧含量的测定

Chemical analysis of titanium and titanium alloys. Determination of oxygen content.

FZ 43001-1991 桑蚕紬丝织物

silkworm silk fabric

JIS H 1333:1991 镁合金中的锌含量测定方法

Methods for determination of zinc in magnesium alloys

JIS H 1341:1990 镁合金中钙含量的测定方法

この規格は，マグネシウム合金中の力ルシウム定量方法について規定する。

Method for determination of calcium in magnesium alloys

JIS G 1324:1989 钙硅化学分析方法

この規格は，カルシウムシリコン中のカルシウム，けい素，炭素及びりんの定量方法について規定する。

Methods for chemical analysis of calcium-silicon

ISO 209-1:1989 加工铝和铝合金 化学成分和产品形式 第1部分:化学成分

Specifies definitions and chemical composition. Gives rules for rounding for determination of compliance (annex A) and guide for ISO designations (annex B).

Wrought aluminium and aluminium alloys; chemical composition and forms of products; part 1: chemical composition