共找到 784 条与 轻金属及其合金分析方法 相关的标准,共 53 页
This Technical Report constitutes an attempt to explain the numerical results of a statistical examination in the simplest possible way and to show how statistical results can be used in laboratory practice. This simplified method is applicable when the number of laboratories is not more than 20 and when the number of results per laboratory is not more than 10.
Chemical analysis of light metals and their alloys; Statistical interpretation of inter-laboratory trials
The method is applicable to products having titanium contents between 0,003 and 0,3 % (m/m). Specifies principle and procedure of the method, reagents, apparatus, sampling, expression of results and test report.
Aluminium and aluminium alloys; Determination of titanium content; Diantipyrylmethane photometric method
The method is applicable to products having thorium contents between 0,2 and 5,0 % (m/m). Specifies principle, reagents, apparatus, sampling, procedure, expression of results and test report.
Magnesium alloys; Determination of thorium; Part 1 : Gravimetric method
Reagents, procedure, calibration, calculation. Titanium content 0.005 to 0.3 per cent.
Methods for the analysis of aluminium and aluminium alloys. Titanium (spectrophotometric chromotropic acid method)
Chemical analysis of aluminium and its alloys. Determination of zinc. Atomic absorption method.
Analysis of aluminium and its alloys by emission spectrometry.
Chemical analysis of aluminium and its alloys. Determination of lead. Atomic absorption method.
Analysis of light metals by spectrography. Processing of test results. Statistical interpretation.
Chemical analysis of aluminium and its alloys. Determination of chromium. Atomic absorption method.
이 규격은 알루미늄 및 알루미늄 합금의 제품에 입힌 양극 산화피막이 받는 변형에 의한 균열
Test method for resistance to cracking by deforming of anodic oxidation coatings on aluminium and aluminium alloys
The method is applicable to products having titanium contents between 0,005 and 0,3 % (m/m). However, the method is not applicable completely to alloys having silicon contents higher than 1 % (m/m) (see annex). Specifies principle and procedure of the method, reagents, apparatus, sampling, expression of results and test report.
Aluminium and aluminium alloys; Determination of titanium; Spectrophotometric chromotropic acid method
The method is applicable to nickel contents between 0,001 and 3 % (m/m). Specifies principle, reagents, apparatus, sampling, procedure, expression of results and test report.
Aluminium and aluminium alloys; Determination of nickel; Spectrophotometric method using dimethylglyoxime
The method is applicable to products having magnesium contents between 0,01 and 5 % (m/m). Specifies principle, reagents, apparatus, sampling, procedure, expression of results and test report.
Aluminium and aluminium alloys; Determination of magnesium; Atomic absorption spectrophotometric method
Methods for determination of aluminium oxide
The method is applicable to copper contents between 0,005 and 5 % (m/m). Specifies principle, reagents, apparatus, sampling, procedure, expression of results and test report.
Aluminium and aluminium alloys; Determination of copper; Atomic absorption spectrophotometric method
The method is applicable to nickel contents between 0,005 and 3 % (m/m). Specifies principle, reagents, apparatus, sampling, procedure, expression of results and test report.
Aluminium and aluminium alloys; Determination of nickel; Atomic absorption spectrophotometric method
The method is applicable to chromium contents between 0,002 and 0,60 % (m/m). It may be extended to chromium contents of up to 1,5 % (m/m). Specifies principle, reagents, apparatus, sampling, procedure, expression of results and test report.
Aluminium and aluminium alloys; Determination of chromium; Spectrophotometric method using diphenylcarbazide, after extraction
Solutions required, procedures, calibrations and calculations. Nickel content between 0.005 per cent and 5.0 per cent, and between 0.005 per cent and 3.0 per cent.
Methods for the analysis of aluminium and aluminium alloys - Nickel (atomic absorption method)
Solutions required, procedures, calibrations and calculations. Copper content between 0.005 per cent and 5.0 per cent, and between 0.005 per cent and 3.0 per cent.
Methods for the analysis of aluminium and aluminium alloys - Copper (atomic absorption method)
Chemical analysis of aluminium and aluminium alloys. Spectrophotometric determination of copper.
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号