共找到 784 条与 轻金属及其合金分析方法 相关的标准,共 53 页
The method is applicable to the determination of silicon contents between 0,02 and 0,4 % (m/m) in aluminium and aluminium alloys. The method is not applicable to alloys containing tin or bismuth. Specifies principle and procedure of the method, the reagents, apparatus, sampling, expression of results and test report.
Aluminium and aluminium alloys; Determination of silicon; Spectrophotometric method with the reduced silicomolybdic complex
The method is applicable to the determination of iron content between 0,05 and 2,5 % in aluminium and aluminium alloys. The method does not apply completely to unalloyed aluminium, aluminium-silicon alloys and any other aluminium alloy that is not easily attacked with hydrochloric acid (see annex A) and alloys containing copper, zinc and nickel (see annex B).
Aluminium and aluminium alloys; Determination of iron; Orthophenanthroline photometric method
The method is applicable to the determination of aluminium content between 1,5 and 12,0 % in magnesium alloys other than those containing zirconium, thorium or rare earths.
Magnesium alloys; Determination of aluminium; 8-hydroxyquinoline gravimetric method
The method is applicable to the determination of silicon content greater than or equal to 0,30 % in aluminium and aluminium alloys. The method is not completely applicable to alloys containing silicon or magnesium (see annex A) and tin or antimony respectively (see annex B), for which it should be modified.
Aluminium and aluminium alloys; Determination of silicon; Gravimetric method
The method does not apply completely to alloys with a silicon content higher than 10 % and a manganese content less than 0,1 % (see annex) and aluminium alloys containing tin, antimony, bismuth, zirconium, etc. Specifies principle and procedure of the method, reagents, apparatus, sampling, expression of results and test report.
Aluminium and aluminium alloys; Determination of manganese; Photometric method (Manganese content between 0,005 and 1,5 %)
The method is applicable to alloys having silicon contents between 0,01 and 0,6 %. The method does not apply to alloys containing rare earths or thorium. Specifies principle and procedure of the method, the reagents, apparatus, sampling, expression of results and test report.
Magnesium and magnesium alloys; Determination of silicon; Spectrophotometric method with the reduced silicomolybdic complex
The method is applicable to the determination of iron content between 0,002 and 0,05 % in magnesium and magnesium alloys other than those containing zirconium. Specifies principle and procedure of the method, the reagents, apparatus, sampling, expression of results and test report.
Magnesium and magnesium alloys; Determination of iron; Orthophenanthroline photometric method
The method is applicable to the determination of manganese content in magnesium and magnesium alloys which do not contain zirconium, rare earths, or thorium. Specifies principle and procedure of the method, the reagents, apparatus, sampling, expression of results and test report.
Magnesium and magnesium alloys; Determination of manganese; Periodate photometric method (Manganese content less than 0,01 %)
Solutions, procedures, calibration and calculation. Zinc content 0.005 per cent to 0.20 per cent.
Methods for the analysis of aluminium and aluminium alloys - Zinc (atomic absorption method)
Method for determination of boron in aluminium
The method is applicable to the determination of magnesium contents between 0,1 and 12 % (m/m). Specifies principle and procedure of the method, the reagents, apparatus, sampling, expression of results and test report.
Chemical analysis of aluminium and its alloys; Complexometric determination of magnesium
This specification covers the requirements for nonslip deck covering compounds for aluminum alloy landing mats. The compounds are suitable for use under Air Pollution Regulations.
COMPOUND, DECK COVERING, NONSLIP, LIGHTWEIGHT FOR ALUMINUM ALLOY LANDING MATS
Préparer des solutions étalons de baryum de concentration appropriée en diluant la solution étalon de baryum de qualité AA et de 1000 ppm et en ajoutant de la solution de KCI a 2.5 % dans la même proportion qu'avec la prise.
Methodes D'Essai Des Elements Toxiques A L'Etat De Trace Dans Les Revetements Protecteurs Dosage Du Baryum Extractible (Ba) En Faible Concentration
この規格は,日本工業規格に規定されたアルミニウムおよびアルミニウム合金の分析方法に共通な一般事項について規定する。
General rules for chemical analysis of aluminium and aluminium alloy
Methods for determination of zinc in aluminium and aluminium alloy
Methods for determination of magnesium in aluminium alloy
Methods for determination of chromium in aluminium alloy
Reagents, sampling methods, test procedure. Magnesium content 0.10 per cent to 5 per cent.
Methods for the analysis of aluminium and aluminium alloys - Determination of magnesium (volumetric CDTA method)
Photometric method for tin contents up to 0.08 per cent. Reagents, sampling methods, test procedure.
Methods for the analysis of magnesium and magnesium alloys - Determination of tin in magnesium and magnesium alloys (photometric method)
The method is applicable to the determination of manganese contents between 0,002 and 0,2 % (m/m). Specifies principle and procedure of the method, reagents, apparatus, sampling, expression of results and test report.
Magnesium and its alloys; Determination of manganese in magnesium alloys containing zirconium, rare earths, thorium and silver; Periodate photometric method
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号