共找到 307 条与 粉末冶金分析方法 相关的标准,共 21 页
Hardmetals—Abrasion tests for hardmetals
Sintered metal materials(excluding hardmetals) without notch impact test piece
本标准规定了气体吸附BET法测定分散的(例如纳米粉)或多孔的固体物质的整个(见注释)外部和内部通孔的比表面积的方法。
Determination of the specific surface area of solids by gas adsorption using the BET method
Metallic powders-Determination of apparent density-Part 3: Oscillating funnel method
Sintered metal porous materials—Determination of air filter permeability
Hardmetals—Determination of (the magnetization) coercivity
Hardmetals—Palmqvist toughness test
本标准规定了硬质合金孔隙度和非化碳的存在、类型和分布的金相测定方法。
Hardmetals.Metallographic determination of porosity and uncombined carbon
本标准规定了致密烧结金属材料与硬质合金密度的测定方法。
Impermeable sintered metal materials and hardmetals.Determination of density
GB/T 3849的本部分规定了硬质合金洛氏硬度(A标尺)试验的原理、符号及说明、试验设备、试样、试验程序、结果表示及试验报告。 本部分适用于硬质合金洛氏硬度(A标尺)的测定。
Hardmetals.Rockwell hardness test (scale A).Part 1:Test method
本标准规定了压制-烧结、金属注射成型-烧结制备拉伸试样使用的模具尺寸及烧结和粉末锻造制品经过机加工制备拉伸试样的尺寸。 本标准适用于所有烧结金属及合金材料(不包括硬质合金)的拉伸试样。
Sintered metal materials, excluding hardmetals.Tensile test pieces
本标准规定了可渗透性烧结金属材料透气度的测定方法。 本标准适用于管状或平板状可渗透性烧结金属材料透气度的测定。
Permeable sintered metal materials.Determination of the air permeability
本标准规定了金属粉末和参照粉末在相同条件下进行压制和烧结后,其尺寸变化的测定方法〔见第4章〉〉本标准适用于测定金眉粉末(不包括硬质合金用粉)在成型和烧结过程中的3种尺寸变化。
Metallic powders,excluding powders for hardmetals.Determination of dimensional changes associated with compacting and sintering
GB/T3851—2015/180 3327 ﹕2009 硬质合金横向断裂强度测定方法本标淮规定了硬质合金横向断裂强度的测定方法。 本标淮适用于塑性极小的硬质合金a 如果用于断裂前有显著塑性变形的硬质合金y可能得到不止确的结果〉在此惰况下〉本标准仅能用来比较。 2 符号及说明
Hardmetals.Determination of transverse rupture strength
本部分规定了硬质合金显微组织的金相测定方法。
Hardmetals.Metallographic determination of microstructure.Part 1:Photomicrographs and description
本标准规定了可渗透性烧结金属材料(其孔隙是连续贯通或者互相连接的)流体渗透性的测定方法。试验是在流体渗透性可用粘性和惯性渗透系数来表示的情况下进行的(参见附录A)。本标准不适用于细长的管状试样,因为流体通过管状试样内孔方向的压降与流体通过管状试样壁厚方向的压降相比不可忽略(参见附录A.5)。
Permeable sintered metal materials.Determination of fluid permeability
本标准规定了金属粉末有效密度的测定方法。本标准适用于金属粉末有效密度的测定。
Metallic powders.Determination of effective density.Liquid immersion method
本标准规定了金属粉末在规定条件下,在封闭的模具中,受到单向压制时,测定其压缩性的方法。 本标准不适用于硬质合金粉末。 2 符号
Metallic powders (excluding powders for hardmetals).Determination of compressibility in uniaxial compression
本标准规定了测定金属粉末成形性的拉托拉试验方法。 本标准适用于粉末压坯的耐磨性和端角部分的耐撞击性的测定。
Metallic powder.Rattle test for the green compacts
GB/T1479 的本部分规定了在标准条件下用漏斗测量金居粉末松装密度的方法”本部分适用于自由流过孔径为2′5 mm 漏斗的金眉粉末。 如果粉末难以通过直径为2﹒5 mm 的孑L﹐但能自由流道5﹒0 mm 的孔﹐垓方法也可以使用。 在本标准中的第2部分(见GB/T1479′2)中规定了不能通过5﹒0 mm 孔径的粉末的松装密度测量方法。
Metallic powders—Determination of apparent density—Part 1:Funnal method
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号