H26 金属无损检验方法 标准查询与下载
共找到 1513 条与 金属无损检验方法 相关的标准，共 101 页
La présente Norme européenne spécifie les techniques fondamentales de radiographie sur film et de radiographie numérique permettant d'obtenir des résultats satisfaisants et reproductibles de manière économique. Les techniques reposent sur une pratique généralement reconnue et sur la théorie fondamentale en la matière.La présente Norme européenne s'applique à l'examen radiographique des canalisations en matériaux métalliques afin de détecter des défauts induits par le service tels que piqûres de corrosion, corrosion généralisée et érosion. Outre sa signification conventionnelle, il convient de comprendre que le terme "canalisation", tel qu'il est utilisé dan
Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 2 : Double wall radiographic inspection
- ICS
- 19.100;23.040.01
- CCS
- H26
- 发布
- 2014-02-15
- 实施
- 2014-02-15
This European Standard specifies fundamental techniques of film and digital radiography with the object of enabling satisfactory and repeatable results to be obtained economically. The techniques are based on generally recognized practice and fundamental theory of the subject. This European Standard applies to the radiographic examination of pipes in metallic materials for service induced flaws such as corrosion pitting, generalized corrosion and erosion. Besides its conventional meaning, "pipe" as used in this standard should be understood to cover other cylindrical bodies such as tubes, penstocks, boiler drums and pressure vessels. Weld inspection for typical welding process induced flaws is not covered, but weld inspection is included for corrosion/erosion type flaws. The pipes may be insulated or not, and can be assessed where loss of material due, for example, to corrosion or erosion is suspected either internally or externally. This part of EN 16407 covers double wall inspection techniques for detection of wall loss, including double wall single image (DWSI) and double wall double image (DWDI). Note that the DWDI technique described in this part of EN 16407 is often combined with the tangential technique covered in EN 16407-1. This European Standard applies to in-service double wall radiographic inspection using industrial radiographic film techniques, computed digital radiography (CR) and digital detector arrays (DDA).
Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 2: Double wall radiographic inspection
- ICS
- 19.100;23.040.01
- CCS
- H26
- 发布
- 2014-01
- 实施
本标准规定了进、排气门的超声检测方法及质量分级。本标准适用于发动机缸径在200 mm以下的进、排气门,也适用于摩托车发动机气门。
Nondestructive testing.Ultrasonic testing of aivs
- ICS
- 19.100
- CCS
- H26
- 发布
- 2013-12-31
- 实施
- 2014-07-01
Non-destructive testing. Infrared thermography. Vocabulary
- ICS
- 01.040.19;19.100
- CCS
- H26
- 发布
- 2013-12-31
- 实施
- 2013-12-31
Non-destructive testing. Radiographic testing of metallic materials using film and X- or gamma rays. Basic rules
- ICS
- 77.040.20
- CCS
- H26
- 发布
- 2013-12-31
- 实施
- 2013-12-31
This part of ISO 15548 identifies the functional characteristics of a general-purpose eddy current instrument and provides methods for their measurement and verification. The evaluation of these characteristics permits a well-defined description and comparability of eddy current equipment. By careful choice of the characteristics, a consistent and effective eddy current examination system can be designed for a specific application. Where accessories are used, these are characterised using the principles of this part of ISO 15548. This part of ISO 15548 gives neither the extent of verification nor acceptance criteria for the characteristics. They are given in the application documents.
Non-destructive testing .Equipment for eddy current examination.Part 1: Instrument characteristics and verification
- ICS
- 19.100
- CCS
- H26
- 发布
- 2013-12
- 实施
Non-destructive testing. Penetrant testing. Reference test blocks
- ICS
- 19.100
- CCS
- H26
- 发布
- 2013-11-30
- 实施
- 2013-11-30
Non-destructive testing. Penetrant testing. Testing of penetrant materials
- ICS
- 19.100
- CCS
- H26
- 发布
- 2013-11-30
- 实施
- 2013-11-30
This International Standard describes two types of reference blocks: —Type 1 reference blocks are used to determine the sensitivity levels of both fluorescent and colour contrast penetrant product families; —Type 2 reference blocks are used for routine assessment of the performance of both fluorescent and colour contrast penetrant testing. The reference blocks are to be used in accordance with part 1 of this International Standard.
Non-destructive testing.Penetrant testing.Part 3: Reference test blocks
- ICS
- 19.100
- CCS
- H26
- 发布
- 2013-11
- 实施
This part of ISO 3452 specifies the technical requirements and test procedures for penetrant materials for their type testing and batch testing. This part of ISO 3452 covers the temperature range 10℃ to 50℃. Additional tests in part 5 or part 6 of ISO 3452 may be required outside this range. On-site control tests and methods are detailed in ISO 3452-1.
Non-destructive testing.Penetrant testing.Part 2: Testing of penetrant materials
- ICS
- 19.100
- CCS
- H26
- 发布
- 2013-11
- 实施
本标准规定了热喷涂涂层结合强度检测方法。本标准适用于厚度大于0.38 mm(0.015 in)的热喷涂涂层垂直于涂层表面方向上的结合强度的检测。
Test method for adhesion or cohesion strength of thermal spray coatings
- ICS
- 19.100
- CCS
- H26
- 发布
- 2013-09-10
- 实施
- 2013-12-01
本标准规定了用浸蚀方法检查高强度钢构件表面局部热损伤的操作步骤和要求。本标准适用于裸露的高强度低合金钢构件和渗碳构件的浸蚀检查。本标准不适用于渗氮处理或碳氮共渗处理过的表面硬化钢构件。
Etch inspection of high strength steel parts
- ICS
- 19.100
- CCS
- H26
- 发布
- 2013-08-26
- 实施
- 2013-11-01
本标准规定了民航维修过程中钎焊氟离子检测的采样、测试方法、仪器、试剂、校准、步骤、计算和质量控制。本标准适用于民航维修过程中钎焊的氟离子检测。
Test methods for fluoride ion in braze welding
- ICS
- 19.100
- CCS
- H26
- 发布
- 2013-08-26
- 实施
- 2013-11-01
Non-destructive testing - Image quality of radiographs - Part 5: Determination of the image unsharpness value using duplex wire-type image quality indicators
- ICS
- 19.100
- CCS
- H26
- 发布
- 2013-08-10
- 实施
- 2013-08-10
Non-destructive testing. Image quality of radiographs. Determination of the image unsharpness value using duplex wire-type image quality indicators
- ICS
- 19.100
- CCS
- H26
- 发布
- 2013-07-31
- 实施
- 2013-07-31
Non-destructive testing. Image quality of radiographs. Experimental evaluation of image quality values and image quality tables
- ICS
- 19.100
- CCS
- H26
- 发布
- 2013-07-31
- 实施
- 2013-07-31
Non-destructive testing. Image quality of radiographs. Determination of the image quality value using wire-type image quality indicators
- ICS
- 19.100
- CCS
- H26
- 发布
- 2013-07-31
- 实施
- 2013-07-31
Non-destructive testing. Image quality of radiographs. Image quality classes
- ICS
- 19.100
- CCS
- H26
- 发布
- 2013-07-31
- 实施
- 2013-07-31
Non-destructive testing - Penetrant testing - Part 1: general principles
- ICS
- 19.100
- CCS
- H26
- 发布
- 2013-07-12
- 实施
- 2013-07-12
Non-destructive testing - Acoustic emission testing - Examination of metallic pressure equipment during proof testing - Planar location of AE sources; German version EN 14584:2013
- ICS
- 17.140.20;77.040.20
- CCS
- H26
- 发布
- 2013-07
- 实施
