H26 金属无损检验方法 标准查询与下载
共找到 1513 条与 金属无损检验方法 相关的标准，共 101 页
Founding. Magnetic particle testing
- ICS
- 19.100;77.180
- CCS
- H26
- 发布
- 2012-11-30
- 实施
- 2012-11-30
本标准规定了钢管自动漏磁探伤系统(一般由漏磁探伤仪、探测元件、磁化装置以及机械传动装置等部分组成)综合性能的测试条件、对比样管、测试准备、测试项目、测试方法、应达到的最低性能指标及测试报告内容。本标准适用于钢管直线前进和钢管螺旋前进的自动漏磁探伤系统综合性能的测试。对于钢棒自动漏磁探伤系统的综合性能测试可参照使用。
Measurement method of comprehensive properties for automatic magnetic flux leakage flaw detection system for steel tubes
- ICS
- 77.040.20
- CCS
- H26
- 发布
- 2012-11-07
- 实施
- 2013-03-01
Non-destructive testing - Ultrasonic thickness measurement
- ICS
- 19.100
- CCS
- H26
- 发布
- 2012-11
- 实施
Non-destructive testing. Ultrasonic testing. Specification for calibration block No. 1
- ICS
- 19.100
- CCS
- H26
- 发布
- 2012-10-31
- 实施
- 2012-10-31
This International Standard specifies reduirements for the dimensions, material and manufacture of a _ steel block for calibrating Ultrasonic test equipment used in manual testing.
Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 1
- ICS
- 19.100;25.160.40
- CCS
- H26
- 发布
- 2012-09
- 实施
SY/T 6858的本部分规定了采用A型脉冲反射式超声波检测仪检测、评定钻杆焊接缺陷的方法。本部分适用于钻杆生产中摩擦焊焊缝及热影响区的超声检测，也适用于在役或修复钻杆焊缝及热影响区的检测。
Nondestructive testing method for OCTG.Part 4:Ultrasonic inspection for drill pipe weld seams
- ICS
- 75.180.10;77.140.75
- CCS
- H26
- 发布
- 2012-08-23
- 实施
- 2012-12-01
本标准规定了高温紧固螺栓超声检测工艺方法和评定标准。本标准适用于火力发电机组汽缸、汽门、各种阀门和蒸汽管道法兰等直径不小于M32的高温紧固螺栓的超声检测。其他紧固螺栓的超声检测也可参照执行。
The technical guide of ultrasonic inspection for high-temperature tight bolts
- ICS
- 77.040.20
- CCS
- H26
- 发布
- 2012-08-23
- 实施
- 2012-12-01
SY/T 6858的本部分规定了钻具螺纹磁粉检测磁化方法、磁场强度、磁悬液配制、检测方法、磁痕评判、检测报告的内容及检测人员的一般要求。本部分适用于油气井钻井用铁磁性钻具螺纹部位表面或近表面缺陷的磁粉检测。
Nondestructive testing method for OCTG.Part 3:Magnetic particle testing for drilling tool thread
- ICS
- 75.180.10;77.040.20
- CCS
- H26
- 发布
- 2012-08-23
- 实施
- 2012-12-01
Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys (ISO 22825:2012); German version EN ISO 22825:2012
- ICS
- 25.160.40
- CCS
- H26
- 发布
- 2012-08
- 实施
This Standard specifies requirements for the automated angle beam ultrasonic examination (including the method using phased array probe) of longitudinal imperfections of seamless steel tubes and longitudinal imperfections of welded portions of welded steel tubes (excluding submerged arc-welded tubes).
Automated ultrasonic examination of steel pipes and tubes
- ICS
- 23.040.10;77.040.20;77.140.75
- CCS
- H26
- 发布
- 2012-06-20
- 实施
- 2012-06-20
This Standard specifies requirements for electromagnetic flux leakage examination of seamless and welded steel tubes (excluding submerged arc-welded tubes). Unless otherwise specified by the product standard or agreed between the purchaser and the manufacturer, it is mainly applicable to inspection of longitudinal imperfections, on tubes with an outside diameter greater than or equal to 10 mm.
Automated flux leakage examination of steel pipes and tubes
- ICS
- 23.040.10;77.040.20;77.140.75
- CCS
- H26
- 发布
- 2012-06-20
- 实施
- 2012-06-20
Non-destructive testing of welds. Ultrasonic testing. Testing of welds in austenitic steels and nickel-based alloys
- ICS
- 25.160.40
- CCS
- H26
- 发布
- 2012-05-31
- 实施
- 2012-05-31
本标准规定了民用航空器所用金属与非金属材料及零部件射线照相检测的一般要求和详细要求。 本标准适用于民用航空器所用金属与非金属材料及零部件的射线照相检测。
Nondestructive testing for aircraft.Radiographic testing
- ICS
- 19.100
- CCS
- H26
- 发布
- 2012-04-16
- 实施
- 2012-08-01
本标准规定了用磁粉检测法检验民用航空器所用铁磁性材料及零部件表面和近表面不连续的最低要求。 本标准适用于用磁粉检测法检验民用航空器所用铁磁性材料及制成品，包括原材料、毛坯、成品和半成品、焊接件和在役零件表面和近表面的裂纹、折叠、发纹、夹杂和其他不连续性。磁粉检测的材料适用性参见附录A. 本标准不适用于检验非铁磁性材料，如奥氏体不锈钢。
Nondestructive testing for aircraft.Magnetic paticle testing
- ICS
- 19.100
- CCS
- H26
- 发布
- 2012-04-16
- 实施
- 2012-08-01
Non-destructive testing - Ultrasonic testing - Examination for discontinuities perpendicular to the surface
- ICS
- 19.100
- CCS
- H26
- 发布
- 2012-04
- 实施
Non-destructive testing - Ultrasonic testing - Characterization and sizing of discontinuities
- ICS
- 19.100
- CCS
- H26
- 发布
- 2012-04
- 实施
Non-destructive testing - Ultrasonic testing - General principles
- ICS
- 19.100
- CCS
- H26
- 发布
- 2012-04
- 实施
Non-destructive testing - Ultrasonic testing - Time-of-flight diffraction technique as a method for detection and sizing of discontinuities
- ICS
- 19.100
- CCS
- H26
- 发布
- 2012-04
- 实施
Non-destructive testing - Ultrasonic testing - Transmission technique
- ICS
- 19.100
- CCS
- H26
- 发布
- 2012-04
- 实施
Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
- ICS
- 19.100
- CCS
- H26
- 发布
- 2012-04
- 实施
