H26 金属无损检验方法 标准查询与下载
共找到 1513 条与 金属无损检验方法 相关的标准，共 101 页
本标准规定了钢管自动涡流探伤系统（一般由涡流探伤仪、检测线圈、磁饱和装置以及机械传动装置等部分组成）综合性能的测试条件、对比试样、测试项目、测试方法、应达到的最低性能指标及测试报告内容。 本标准适用于钢管穿过式或旋转的钢管/扁平线圈式自动涡流探伤系统综合性能的测试，对于钢棒自动涡流或漏磁探伤系统以及采用其他形式检测线圈的钢管自动涡流探伤系统、钢管自动漏磁探伤系统的综合性能测试可参照使用。
Measurement method of comprehensive properties for automatic eddy current flaw detection system for steel tubes
- ICS
- 77.040.20
- CCS
- H26
- 发布
- 2011-12-20
- 实施
- 2012-07-01
本标准规定了钢管自动超声探伤系统（一般包括超声波探伤仪、超声探头和传动装置）综合性能的测试条件、对比试样、测试项目、测试方法、应达到的最低性能指标及测试报告内容。 本标准适用于钢管自动超声探伤系统综合性能的测试，对于手动超声探伤、电磁超声自动探伤、相控阵超声自动探伤及钢棒超声自动探伤系统的综合性能测试可参照使用。
Measurement method of comprehensive properties for automatic ultrasonic flaw detection system for steel tubes
- ICS
- 77.040.20
- CCS
- H26
- 发布
- 2011-12-20
- 实施
- 2012-07-01
Founding - Ultrasonic testing - Part 3 : spheroidal graphite cast iron castings.
- ICS
- 77.040.20
- CCS
- H26
- 发布
- 2011-12-01
- 实施
- 2011-12-30
Non-destructive testing - Terminology - Terms used in ultrasonic testing with phased arrays.
- ICS
- 01.040.19;19.100
- CCS
- H26
- 发布
- 2011-12-01
- 实施
- 2011-12-16
Non-destructive testing - Methods for absolute calibration of acoustic emission transducers by the reciprocity technique
- ICS
- 19.100
- CCS
- H26
- 发布
- 2011-12
- 实施
Founding. Ultrasonic testing. Spheroidal graphite cast iron castings
- ICS
- 77.040.20
- CCS
- H26
- 发布
- 2011-11-30
- 实施
- 2011-11-30
Non-destructive testing. Terminology. Terms used in ultrasonic testing with phased arrays
- ICS
- 01.040.19;19.100
- CCS
- H26
- 发布
- 2011-11-30
- 实施
- 2011-11-30
Non destructive testing - Radiation methods - Computed tomography - Part 1 : terminology.
- ICS
- 01.040.19;19.100
- CCS
- H26
- 发布
- 2011-11-01
- 实施
- 2011-11-26
Non destructive testing - Radiation methods - Computed tomography - Part 4 : qualification.
- ICS
- 19.100
- CCS
- H26
- 发布
- 2011-11-01
- 实施
- 2011-11-26
Non destructive testing - Radiation methods - Computed tomography - Part 2 : principle, equipment and samples.
- ICS
- 19.100
- CCS
- H26
- 发布
- 2011-11-01
- 实施
- 2011-11-26
Non destructive testing - Radiation methods - Computed tomography - Part 3 : operation and interpretation.
- ICS
- 19.100
- CCS
- H26
- 发布
- 2011-11-01
- 实施
- 2011-11-26
Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD).
- ICS
- 25.160.40
- CCS
- H26
- 发布
- 2011-11-01
- 实施
- 2011-11-05
Non-destructive testing - Performance-based qualification
- ICS
- 03.100.30;19.100
- CCS
- H26
- 发布
- 2011-11
- 实施
This part of BS 9690 specifies the basic requirements for screening pipes and similar tubular objects using the guided wave testing (GWT) method, including set-up, data collection and basic interpretation of the data.It is intended to be read in conjunction with BS 9690-1. This part is applicable to the testing of ferritic carbon and low-alloy steel pipes (tubes used for the transport of fluids) and structural tubulars (tubes used for load-bearing constructions) in the diameter range 1 inch (25 mm) to 60 inches (1.52 m), with maximum wall thickness of 2.2 inches (55 mm).
Non-destructive testing. Guided wave testing. Basic requirements for guided wave testing of pipes, pipelines and structural tubulars
- ICS
- 19.100
- CCS
- H26
- 发布
- 2011-10-31
- 实施
- 2011-10-31
This part of BS 9690 provides the general principles for guided wave testing. The specific conditions of application and use of guided wave testing, which depend on the type of object tested, are described in documents which could include: a) product standards; b) specifications; c) codes; d) contractual documents; e) written procedures. Unless otherwise specified in the referencing documents the minimum recommendations of this standard are applicable. This standard does not define: 1) extent of testing; 2) optimum test parameters for specific applications; or 3) acceptance criteria.
Non-destructive testing. Guided wave testing. General guidance and principles
- ICS
- 19.100
- CCS
- H26
- 发布
- 2011-10-31
- 实施
- 2011-10-31
Non destructive testing. Radiation methods. Computed tomography. Terminology
- ICS
- 01.040.19;19.100
- CCS
- H26
- 发布
- 2011-10-31
- 实施
- 2011-10-31
This Standard establishes the procedures for measuring, by means of electronic measuring instruments, the electrical characteristics of ultrasonic test instruments that are equipped with a manually operated display unit using the pulse-echo technique.
Method for evaluating electronic characteristics of ultrasonic test instruments
- ICS
- 19.100
- CCS
- H26
- 发布
- 2011-10-20
- 实施
Non destructive testing. Radiation methods. Computed Tomography. Operation and interpretation
- ICS
- 19.100
- CCS
- H26
- 发布
- 2011-09-30
- 实施
- 2011-09-30
Non destructive testing. Radiation methods. Computed tomography. Qualification
- ICS
- 19.100
- CCS
- H26
- 发布
- 2011-09-30
- 实施
- 2011-09-30
Non destructive testing. Radiation methods. Computed tomography. Principle, equipment and samples
- ICS
- 19.100
- CCS
- H26
- 发布
- 2011-09-30
- 实施
- 2011-09-30
