H26 金属无损检验方法 标准查询与下载
共找到 1513 条与 金属无损检验方法 相关的标准，共 101 页
Method for evaluating performance characteristics of ultrasonic pulse-echo testing systems
- ICS
- 19.100
- CCS
- H26
- 发布
- 2010-08-20
- 实施
This specification covers steel cleanliness requirements in inch/pound units for special aircraft-quality ferromagnetic steels, including hardenable corrosion resistant steels, by magnetic particle inspection methods. This specification contains sampling, sample preparation, inspection procedures and cleanliness rating criteria. The metric version, MAM 2304, has been cancelled. This procedure has been used typically for the cleanliness evaluation of blooms, billets, tube rounds, stock for forging or flash welded rings, slabs, bars, sheet, plate, tubing, and extrusions used in fabricating highly stressed parts where very strict magnetic particle inspection standards are used in final inspection of such parts, but may be used for qualification of a heat, melt or lot of steel.
Steel Cleanliness, Special Aircraft-Quality Magnetic Particle Inspection Procedure
- ICS
- 49.025.10
- CCS
- H26
- 发布
- 2010-08-18
- 实施
This specification covers steel cleanliness requirements in inch/pound units for aircraft-quality, ferro-magnetic, hardenable corrosion-resistant steels as determined by magnetic particle inspection methods. This specification contains sampling, specimen preparation, and inspection procedures and cleanliness rating criteria. The metric version, MAM 2303, has been cancelled. The SI units have been included in this specification, but the inch-pound units are primary. This procedure has been used typically for the cleanliness evaluation of blooms, billets, tube rounds, stock for forging or flash welded rings, slabs, bars, sheet, strip, plate, tubing, and extrusions used in fabricating parts subject to magnetic particle inspection, but may be used for qualification of a heat, melt, or lot of steel.
Steel Cleanliness, Aircraft Quality Martensitic Corrosion-Resistant Steels, Magnetic Particle Inspection Procedure
- ICS
- 49.025.10
- CCS
- H26
- 发布
- 2010-08-18
- 实施
Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 2: Probes; German version EN 12668-2:2010
- ICS
- 19.100
- CCS
- H26
- 发布
- 2010-06
- 实施
NB／T 20003的本部分规定了: -超声检测的通用技术要求、特定类型工件的相关补充要求和验收标准； -接触式超声脉冲回波法测量工件厚度的技术要求。 本部分适用于核电厂核岛机械设备的铸件、板材、锻件、管材和棒材等原材料和零件以及焊接接头、隔离层、堆焊层、复合板等在制造和安装过程中的超声检测。
Non-destructive testing for mechanical components in nuclear island of nuclear power plants-Part 2: Ultrasonic testing
- ICS
- 19.100;77.040.20
- CCS
- H26
- 发布
- 2010-05-01
- 实施
- 2010-10-01
NB／T 20003规定了核电厂核岛机械设备的无损检测方法、检测结果的质量分级和推荐性的验收标准。 NB／T 20003的本部分规定了核电厂核岛机械设备采用泄漏检测的技术要求和验收标准。 本部分适用于核岛机械设备及零部件在制造和安装过程中的泄漏检测。
Non-destructive testing for mechanical components in nuclear island of nuclear power plants-Part 8: Leak testing
- ICS
- 19.100;77.040.20
- CCS
- H26
- 发布
- 2010-05-01
- 实施
- 2010-10-01
NB/T 20003规定了核电厂核岛机械设备的无损检测方法、检测结果的质量分级和推荐性的验收标准。 NB/T 20003规定了核电厂核岛机械设备无损检测的一般要求和使用原则。 本部分适用于核电厂核岛机械设备制造和安装过程中的无损检验。检测方法包括超声检测、射线检测、渗透检测、磁粉检测、管材制品涡流检测、目视检测和泄露检测。
Non-destructive testing for mechanical components in nuclear island of nuclear power plants-Part 1: General requirements
- ICS
- 19.100;77.040.20
- CCS
- H26
- 发布
- 2010-05-01
- 实施
- 2010-10-01
NB／T 20003规定了核电厂核岛机械设备的无损检测方法、检测结果的质量分级和推荐性的验收标准。 NB／T 20003的本部分规定了核电厂核岛机械设备在制造和安装过程中进行目视检测的技术要求和验收标准。 本部分适用于核岛机械设备核用材料、零部件、焊接接头及设备表面的目视检测，以及核岛机械设备水压试验时的漏迹检查。 本部分不适用于设备制造阶段的尺寸测量。涉及其他各种无损检测结果辨认的目视观察不在本部分的范围内。
Non-destructive testing for mechanical components in nuclear island of nuclear power plants-Part 7: Visual testing
- ICS
- 19.100;77.040.20
- CCS
- H26
- 发布
- 2010-05-01
- 实施
- 2010-10-01
NB／T 20003规定了核电厂核岛机械设备的无损检测方法、检测结果的质量分级和推荐性的验收标准。 NB／T 20003的本部分规定了核电厂核岛机械设备采用连续法磁粉检测的技术要求和验收标准。 本部分适用于核电厂核岛机械设备用铁磁性材料、零部件及焊接接头在制造和安装过程中的磁粉检测。 本部分不适用于非铁磁性材料的检测。
Non-destructive testing for mechanical components in nuclear island of nuclear power plants-Part 5: Magnetic particle testing
- ICS
- 19.100;77.040.20
- CCS
- H26
- 发布
- 2010-05-01
- 实施
- 2010-10-01
NB／T 20003规定了核电厂核岛机械设备的无损检测方法、检测结果的质量分级和推荐性的验收标准。 NB／T 20003的本部分规定了核电厂核岛机械设备用管材制品进行涡流检测的技术要求和验收标准。 本部分适用于核电厂核岛机械设备用管材制品在制造利安装过程中的涡流检测。适用的管材尺寸为公称外径小于65 mm,公称厚度大于等于O.75 mm且小于3 mm。
Non-destructive testing for mechanical components in nuclear island of nuclear power plants-Part 6: Eddy current testing of tubular products
- ICS
- 19.100;77.040.20
- CCS
- H26
- 发布
- 2010-05-01
- 实施
- 2010-10-01
NB/T 20003规定了核电厂核岛机械设备的无损检测方法、检测结果的质量分级和推荐性的验收标准。 NB/T 20003的本部分规定了核电厂核岛机械设备采用渗透检测的技术要求和验收标准。 本部分适用于核电厂核岛机械设备用材料、零部件以及焊接接头在制造和安装过程中的表面开口缺陷的检测。
Non-destructive testing for mechanical components in nuclear island of nuclear power plants-Part 4: Penetrant testing
- ICS
- 19.100;77.040.20
- CCS
- H26
- 发布
- 2010-05-01
- 实施
- 2010-10-01
NB/T 20003规定了核电厂核岛机械设备的无损检测方法、检测结果的质量分级和推荐性的验收标准。 NB/T 20003的本部分规定了核电厂核岛机械设备采用X射线和γ射线检测的技术要求和验收标准。 本部分适用于核电厂核岛机械设备中铸件和焊接接头在制造和安装过程中的射线检测。
Non-destructive testing for mechanical components in nuclear island of nuclear power plants-Part 3: Radiographic testing
- ICS
- 19.100;77.040.20
- CCS
- H26
- 发布
- 2010-05-01
- 实施
- 2010-10-01
This European Standard defines terma used in ultrasonic testing
Non-destructive testing - Terminology - Part 4: Terms used in ultrasonic testing; Trilingual version EN 1330-4:2010
- ICS
- 01.040.19;19.100
- CCS
- H26
- 发布
- 2010-05
- 实施
This standard describes acoustic emission testing (AT) on metallic surroundings filled with liquids for the detection of corrosion processes that are active at the time of the test. It is applicable to metallic storage tanks, such as those used in the chemical and petrochemical industry.
Non-destructive testing - Acoustic emission - General principles of AE testing for the detection of corrosion within metallic surrounding filled with liquid; German version EN 15856:2010
- ICS
- 19.100
- CCS
- H26
- 发布
- 2010-05
- 实施
This standard specifies methods and acceptance criteria for assessing the electrical performance of analogue and digital ultrasonic instruments for pulse operation using A-scan display, employed for manual ultrasonic non-destructive examination with single or twin transducer probes operating within the centre frequency range 0, 5 MHz to 15 MHz. Ultrasonic instruments for continuous waves are not included in this standard. This standard may partly be applicable to ultrasonic instruments in automatic systems but then other tests can be needed to ensure satisfactory performance.
Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments; German version EN 12668-1:2010
- ICS
- 19.100
- CCS
- H26
- 发布
- 2010-05
- 实施
Steel castings - Magnetic particle inspection
- ICS
- 77.040.20;77.140.80
- CCS
- H26
- 发布
- 2010-04-30
- 实施
- 2010-04-30
Steel castings - Liquid penetrant inspection
- ICS
- 77.040.20;77.140.80
- CCS
- H26
- 发布
- 2010-04-30
- 实施
- 2010-04-30
Non-destructive testing - Terminology - Part 4 : terms used in ultrasonic testing.
- ICS
- 01.040.19;19.100
- CCS
- H26
- 发布
- 2010-04-01
- 实施
- 2010-04-03
This European standard consists of technical terms related to penetrant testing.
Non-destructive testing - Penetrant testing - Vocabulary (ISO 12706:2009); Trilingual version EN ISO 12706:2009
- ICS
- 01.040.19;19.100
- CCS
- H26
- 发布
- 2010-04
- 实施
Non-destructive testing - Characterization and verification of ultrasonic testing equipment - Part 1 : instruments.
- ICS
- 19.100
- CCS
- H26
- 发布
- 2010-03-01
- 实施
- 2010-03-10
