共找到 149 条与 冶金原料与辅助材料综合 相关的标准,共 10 页
Methods of chemical analysis and determination of physical properties of alumina Part 35: Determination of specific surface area Nitrogen adsorption method
Methods of chemical analysis and determination of physical properties of alumina Part 27: Particle size analysis and sieving method
Methods of chemical analysis and determination of physical properties of alumina - Part 25: Determination of bulk and tapped densities
Quantitative detection method of vanadium-titanium magnetite minerals
Terms and definitions for comprehensive utilization of vanadium-titanium magnetite
GB/T23615 的本部分规定了聚氨酯隔热胶的要求,试验方法、检验规则和标志、包装、和运输,贮存及质量证明书与订货单(或合同)内容。 本部分适用于异氰酸酯组合料和多元醇组合料(以下统称原胶)经交联反应制成的铝合金建筑型材用隔热材料(即聚氨酯隔热胶,以下简称隔热胶)。
Thermal barrier materials for architectural aluminum alloy profiles—Part 2: Thermal barrier polyurethane
Thermal barrier materials for architecture aluminium alloy extruded profiles—Part 1:Polyamide profiles
本标准规定了硫铁矿烧渣的要求、试验方法、检验规则、包装、标识、运输、贮存及合同(或订货单)内容等。本标准适用于硫铁矿经高温焙烧产生的烧渣,主要用于制造铁球团、炼铁。
Purple ore
GB/T 23615的本部分规定了铝合金建筑型材用聚氨酯隔热胶材料(以下简称隔热胶)用的异氰酸酯类混合物、多元醇树脂(以下统称为原胶)的要求、试验方法、检验规则和标志、包装、运输、贮存及质量证明书与订货单(或合同)内容。 本部分适用于经化学反应法转化成铝合金建筑型材用隔热胶的原胶。
Accessorial material for architectural aluminum alloy profiles.Part 2:Material for thermal barrier polyurethane
本标准规定了检验铝土矿取样精度的实验方法,并按照GB/T 25945-2010(ISO 8685)规定,以标准偏差的形式表示。本标准适用于检验铝土矿的取样精度。
Aluminium ores.Experimental methods for checking the precision of sampling
本标准规定了为确定初始份样最小数及取样方案而评估铝土矿分布不均匀性的实验方法。 本标准适用于铝土矿批中不均匀性的测定。
Aluminium ores.Experimental determination of the heterogeneity of distribution of a lot
本标准规定了按照GB/T 25945-2010/ISO 8685-1992程序规定取样时,对铝土矿取样偏差的检验方法。 本标准适用于对铝土矿取样偏差的检验。
Aluminium ores.Experimental methods for checking the bias of sampling
本标准规定了铝土矿测定(要求确定最小样品质量)质量特性偏差的试验方法。 本标准适用于铝土矿质量特性偏差的测定。
Aluminium ores.Experimental determination of the heterogeneity of constitution
本标准规定了铝土矿中铁总量无汞污染的测定方法。 本标准适用干铝土矿中以三氧化二铁衰示的铁总量的测定”测定范围罄%N50%。
Aluminium ores.Determination of total iron content.Titanium trichloride reduction method
本标准规定了铝土矿中水分含量的测定。 本标准适用于从散装铝土矿(例如舱料和堆料)中所取样品水分含量的测定。
Aluminium ores.Determination of the moisture content of bulk material
本标准规定了铝土矿取样的必要条件,从流动矿流中和在静置状态下,包括在限动传输带上,取得样品制备用的总样。与其他取样程序相比较,限动传输带上取样是样品收集的参考方法。从移动物流中取样是优先采用的方法。只有当无法从流动矿流中取样时才能考虑静态取样。本标准中规定的静态取样程序只是为了减小某些取样误差。 本标准适用于所有流动铝土矿矿流取样。所推荐程序或许对某些极端偏析情况不适用,如非常湿的粘性物料,或非常干易产生粉尘的物料。在这种情况下或许有必要转换为限动传输带上取样。
Aluminium ores.Sampling procedures
本标准规定了用于制备水分测定、化学分析和物理检测的铝土矿总样和副样的处理方法。 本标准适用于各种铝土矿。
Aluminium ores.Preparation of samples
本文件规定了焦化配煤、烧结矿配料、球团矿配料过程自动采样控制系统的集成系统基本要求、采样单元基本要求、制样单元基本要求和控制单元基本要求。 本文件适用于焦化配煤生产线、烧结矿配料、球团矿配料生产线。
Technical specifications for automatic sampling control system for metallurgical coking, sintering and pellet batching
Aluminum and aluminum alloy ingredient additives
Fine alumina classification and brand naming
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号