H40 钢铁产品综合 标准查询与下载

ISO 683-17:2014 热处理钢、合金钢和易切钢 第17部分:滚球和滚柱轴承钢

Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels

EN ISO 683-17:2014 热处理钢,合金钢和易切削钢.第17部分:滚珠轴承和滚柱轴承钢

Dieser Teil von ISO 683 enthalt die technischen Lieferbedingungen fur funf Gruppen von Walzlagerstahlen, wie in Tabelle 3 aufgefuhrt, namlich durchhartende Walzlagerstahle (Stahle mit ungefahr 1 % C und 1 % bis 2 % Cr), einsatzhartende Walzlagerstahle, induktionshartende Walzlagerstahle (unlegiert und legiert), nichtrostende Walzlagerstahle, warmharte Walzlagerstahle. Dieser Teil von ISO 683 gilt fur die in Tabelle 1 angegebenen Erzeugnisse und Warmebehandlungszustande und die Oberflachenzustande nach Tabelle 2. Zusatzlich zu diesem Teil von ISO 683 gelten die allgemeinen technischen Lieferbedingungen nach ISO 404.

Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2014)

JIS G 0416:2014 钢和钢制品.机械试验用试件和样品的制备和定位

This Standard specifies identification marks,location and preparation of samples and test pieces intended for mechanical tests taken from steel sections,bars,rods, sheets (including strips in coil and flats) and tubular products as defined in JIS G 0203. If agreed in the order,this Standard may also apply to other metallic products.

Steel and steel products -- Location and preparation of samples and test pieces for mechanical testing

DB53/T 620.1-2014 长距离矿浆管道输送 第1部分：设计规范

本部分规定了长距离矿浆管道输送工程的设计基本要求，输送工艺、矿浆输送泵站、管线、配套设施设计要求，试验及其数据应用要求等。 本部分适用于复杂地形的固液两相高浓度均质流或伪均质流矿浆长距离输送管道的设计。

Long distance slurry pipeline transportation part 1: design specification

DB53/T 620.2-2014 长距离矿浆管道输送 长距离矿浆管道输送 第2部分：运行控制

本部分规定了长距离管道输送工程矿浆制备、主泵运行与控制以及管道输送运行与控制等要求。 本部分适用于复杂地形固液两相高浓度均质流或伪均质流长距离矿浆管道输送的运行与控制。

Long-distance slurry pipeline transportation Long-distance slurry pipeline transportation Part 2: Operational control

ISO 683-4:2014 热处理钢、合金钢和易切削钢.第4部分:易切削钢

Heat-treatable steels, alloy steels and free-cutting steels - Part 4: Free-cutting steels

KS D 2103-2014 铸造用生铁

Foundry pig iron

SAE AMS5518M-2014 拉伸强度为150ksi(1034 MPa)18Cr-8Ni冷轧钢制耐腐蚀薄板材和带材

This specification covers a corrosion-resistant steel in the form of sheet and strip. These products have been used typically for parts requiring strength and moderate forming or bending, but usage is not limited to such applications. Mechanical properties specified herein are obtained by cold working (strain hardening) and not by heat treatment. Therefore, the cold-worked product should not be heated to a temperature which adversely affects the mechanical properties or corrosion resistance before, during, or after fabrication.

Steel, Corrosion Resistant, Sheet and Strip 18Cr - 8Ni Cold Rolled, 150 Ksi (1034 MPa) Tensile Strength

BS ISO 15510:2014 不锈钢.化学成分

Stainless steels. Chemical composition

JIS G 0404:2014 钢和钢制品.一般技术交付要求

This Standard specifies the general technical delivery requirements for steel and steel products as defined in JIS G 0203 with the exception of steel forgings/castings and powder metallurgical products.

Steel and steel products -- General technical delivery requirements

ISO 15510:2014 不锈钢.化学成分

This International Standard lists the chemical compositions of stainless steels agreed by ISO/TC 17/SC 4, mainly on the basis of a composition of the specifications in existing ISO, ASTM, EN, JIS, and GB (Chinese) standards. They apply to all wrought product forms including ingots and semi-finished material.

Stainless steels - Chemical composition

SAE AMS5845J-2014 20Cr-35Ni-35Co-10Mo真空感应和自耗电极真空再熔炼溶解热处理、加工增强和老化的耐腐蚀合金圆形棒材

This specification covers a high-strength, corrosion-resistant alloy in the form of bars.

Alloy, Corrosion-Resistant, Round Bars 20Cr - 35Ni - 35Co - 10Mo Vacuum Induction Plus Consumable Electrode Vacuum Remelted Solution Heat Treated, Work Strengthened, and Aged

SAE AMS5844H-2014 20Cr-35Ni-35Co-10Mo真空感应和真空自耗电极真空再熔炼溶解热处理和加工增强的耐腐蚀合金圆形棒材

This specification covers a high-strength, corrosion-resistant alloy in the form of bars.

Alloy, Corrosion-Resistant, Round Bars, 20Cr - 35Ni - 35Co - 10Mo, Vacuum Induction Plus Consumable Electrode Vacuum Remelted, Solution Heat Treated and Work Strengthened

BS 7608:2014 钢产品的疲劳设计和评估指南

This British Standard gives methods for assessing the fatigue life of parts of steel products that are subject to repeated fluctuations of stress. It is applicable to all areas of industrial application that are not covered by other British Standards containing fatigue assessment rules. NOTE Some British Standards have specific product acceptance tests for fatigue life, but do not have assessment rules. In such cases the guidance in this British Standard might be applicable for product development purposes.

Guide to fatigue design and assessment of steel products

BS 7608:2014+A1:2015 钢产品的疲劳设计和评估指南

Guide to fatigue design and assessment of steel products

JIS G 0577:2014 不锈钢点蚀电位测量的方法

This Japanese Industrial Standard specifies the methods of measuring the pitting potential of stainless steel in sodium chloride solution by the potentiokinetic method.

Methods of pitting potential measurement for stainless steels

SN/T 0313-2014 进出口钢材中钼含量的测定 硫代乙酰胺分离-8-羟基喹啉重量法

本标准规定了进出口钢材中钼量的检验方法。本标准适用于进出口钢材中耐热腐蚀钢、不锈钢、高速工具钢的钼量测定,测定范围:2.00%~8.00%。

Determination of molybdenum in steel for import and export.8-hydroxyquinoline gravimetric after separation with thioacetamide

ASTM A700-14 装船钢制品的包装, 标记和装载方法的标准实施规程

1.1 This guide covers the packaging, marking, and loading of steel products for shipment. Assuming proper handling in transit, this guide is intended to assist shippers in packaging and loading steel products to arrive at their destination safely and in good condition. It is also intended that this guide may be used for attaining uniformity, simplicity, sufficiency, and economy in the shipment of steel products. 1.2 This guide applies to semi-finished steel products, bars, structural shapes and sheet piling, rods, wire and wire products, tubular products, plates, sheets, and strips, tin mill products, and castings. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Packaging, Marking, and Loading Methods for Steel Products for Shipment

ASTM A866-14 耐磨中碳轴承钢的标准规格

1.1 This specification covers medium carbon bearing quality steel to be used in the manufacture of anti-friction bearings. 1.2 Supplementary requirements of an optional nature are provided and when desired shall be so stated in the order. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

Standard Specification for Medium Carbon Anti-Friction Bearing Steel

ASTM A295/A295M-14 高碳耐磨轴承钢的标准规格

1.1 This specification covers high-carbon bearing-quality steel to be used in the manufacture of anti-friction bearings. 1.2 Supplementary requirements of an optional nature are provided and when desired shall be so stated in the order. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

Standard Specification for High-Carbon Anti-Friction Bearing Steel