H40 钢铁产品综合 标准查询与下载

ASTM A866-14 耐磨中碳轴承钢的标准规格

1.1 This specification covers medium carbon bearing quality steel to be used in the manufacture of anti-friction bearings. 1.2 Supplementary requirements of an optional nature are provided and when desired shall be so stated in the order. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

Standard Specification for Medium Carbon Anti-Friction Bearing Steel

ASTM A36/A36M-14 碳素结构钢的标准规格

1.1 This specification2 covers carbon steel shapes, plates, and bars of structural quality for use in riveted, bolted, or welded construction of bridges and buildings, and for general structural purposes. 1.2 Supplementary requirements are provided for use where additional testing or additional restrictions are required by the purchaser. Such requirements apply only when specified in the purchase order. 1.3 When the steel is to be welded, a welding procedure suitable for the grade of steel and intended use or service is to be utilized. See Appendix X3 of Specification A6/A6M for information on weldability. 1.4 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system is to be used independently of the other, without combining values in any way. 1.5 The text of this specification contains notes or footnotes, or both, that provide explanatory material. Such notes and footnotes, excluding those in tables and figures, do not contain any mandatory requirements. 1.6 For structural products produced from coil and furnished without heat treatment or with stress relieving only, the additional requirements, including additional testing requirements and the reporting of additional test results, of A6/A6M apply.

Standard Specification for Carbon Structural Steel

ASTM A295/A295M-14 高碳耐磨轴承钢的标准规格

1.1 This specification covers high-carbon bearing-quality steel to be used in the manufacture of anti-friction bearings. 1.2 Supplementary requirements of an optional nature are provided and when desired shall be so stated in the order. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

Standard Specification for High-Carbon Anti-Friction Bearing Steel

KS B ISO 17526:2013 光学和光学仪器.激光器和激光相关设备.激光器的使用寿命

이 표준은 여러 가지 유형의 레이저의 특성을 기술하고, 장기적 작용 상태를 추정 및 예측하는 시험방법과 평가 절차와 이에 대한 용어와 정의를 포함한다.이 표준에 나타난 방법들은 레이저의 수명에 관련된 용어를 정의하고, 수명을 결정짓기 위한 시험절차와 토대가 되는 상황을 규정한다. 이것은 광통신에 사용되는 다이오드 레이저만 제외하고 수명이 중대한 쟁점이 되는 모든 유형의 레이저에 적용된다.

Optics and optical instruments ?; Lasers and laser-related equipment ?; Lifetime of lasers

EN 10357:2013 食品化工行业用奥氏体型,奥氏体.铁素体和铁素体纵向焊接不锈钢管

This European Standard specifies dimensions, tolerances, materials, internal and external surface characteristics, and marking of stainless steels longitudinally fusion welded tubes for the food and chemical industry.

Austenitic@ austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry

JIS G 1257-12-2:2013 钢铁.原子吸收光谱测定测定法.第12部分:铅的测定.第2节:碘化铅萃取后的火焰原子化法

Iron and steel -- Atomic absorption spectrometric method -- Part 12: Determination of lead -- Section 2: Flame atomization after extraction of iodide

DIN EN ISO 377:2013 钢和钢制品.机械试验用样品和试件的定位与制备(ISO 377-2013).德文版本EN ISO 377-2013

Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2013); German version EN ISO 377:2013

ISO 6929:2013 钢材.词汇表

This International Standard defines terms for steel products according to their a) stage of manufacture, b) shape and dimensions, and c) appearance.

Steel products.Vocabulary

BS EN 10269:2013 具有特殊高温和/或低温性能的紧固件用钢和镍合金

Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties

BS ISO 883:2013 不带固定孔的带圆角可转位硬性金属(碳化物)镶嵌件.尺寸规格

Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole. Dimensions

BS ISO 10474:2013 钢和钢制品.检验文件

Steel and steel products. Inspection documents

CB/T 3474.1-2013 船用柴油机钢模锻件 第1部分：技术条件

本标准规定了船用柴油机钢模锻件(以下简称锻件)的分类原则、技术要求、试验方法、检验规则及交付条件。本标准适用于质量不超过250 kg,最大尺寸不超过2 500 mm的船用柴油机结构钢模锻件。

Steel die forgings on diesel engine for ships.Part 1: Technical requirements

CB/T 4313-2013 中速柴油机整体曲轴钢锻件技术条件

本标准规定了中速柴油机整体曲轴钢锻件的要求、试验方法、检验规则、标志和证书、包装、贮存和运输等。本标准适用于整体锻造的中速柴油机曲轴钢锻件的制造和验收。

Specification of solid crankshaft forgings for median speed diesel engine

CB/T 3474.2-2013 船用柴油机钢模锻件 第2部分 公差及机械加工余量

本部分规定了船用柴油机钢质模锻件(以下简称锻件)的公差、机械加工余量。本部分适用于模锻锤、热模锻压力机、螺旋压力机和平锻机等模锻设备上成形,质量不超过250 kg,最大尺寸不超过2500 mm的结构钢模锻件。其它船用钢模锻件亦可参照使用。

Steel die forgings on diesel engine for ships.Part 2: Tolerances and machining allowances

ISO 10474:2013 钢和钢制品.检验文件

This International Standard defines the different types of inspection documents supplied to the purchaser, in accordance with the requirements of the order, for the delivery of steel products. This International Standard is to be used in conjunction with other International Standards which specify the general technical delivery conditions: — for steel and steel products, see ISO 404; — for steel castings, see ISO 4990. NOTE This International Standard can also apply to other products.

Steel and steel products - Inspection documents

ISO 404:2013 钢和钢制品.通用交货技术条件

This International Standard specifies the general technical delivery requirements for all steel products covered by ISO 6929, with the exception of steel castings and powder metallurgical products. ISO 10474 describes the inspection documents to be used. Where the delivery requirements agreed upon for the order or specified in the appropriate product or material standard differ from the general technical delivery requirements defined in this International Standard, then it is the requirements agreed for ordering or specified in the appropriate product or material standard that apply.

Steel and steel products - General technical delivery requirements

BS ISO 404:2013 钢和钢制品.通用交货技术条件

Steel and steel products. General technical delivery requirements

NB/T 20007.19-2013 压水堆核电厂用不锈钢.第19部分:1、2、 3 级马氏体不锈钢承压铸件

本部分规定了压水堆核电厂用1、2、3级可焊马氏体不锈钢承压铸件的制造、试验、检验和验收等技术要求。本部分适用于压水堆核电厂1、2、3级部件用ZG06Cr13Ni4Mo、ZG08Cr12Ni1、ZG07Cr16Ni4Cu3Nb可焊马氏体不锈钢承压铸件。

Stainless steel for pressurized water reactor nuclear power plants.Part 19: Class 1、2 and 3 pressure-retaining martensitic stainless steel castings

NB/T 20005.6-2013 压水堆核电厂用碳钢和低合金钢.第6部分:反应堆冷却剂泵电动机机座铸件

本部分规定了压水堆核电厂冷却剂泵电动机机座用碳钢或低合金钢铸件的制造、化学成分、力学性能、无损检测、缺陷部位的清除和修补、尺寸检查等技术要求。本部分适用于压水堆核电厂冷却剂泵电动机机座用碳钢或低合金钢铸件。

Carbon steel and alloy steel for pressurized water reactor nuclear power plants.Part 6: Motor support stand castings for reactor coolant pumps

NB/T 20005.5-2013 压水堆核电厂用碳钢和低合金钢.第5部分:1、2、3 级承压铸件

本部分规定了压水堆核电厂用1、2、3级碳钢和低合金钢承压铸件的化学成分、力学性能、试验方法、检验规则及外形尺寸等技术要求。本部分适用于压水堆核电厂用1、2、3级碳钢和低合金钢承压铸件的制造和验收。本部分不适用于主蒸汽隔离阀阀体、主给水止回阀体及其他有特殊要求的碳钢和低合金钢铸件。

Carbon steel and low alloy steel for pressurized water reactor nuclear power plants.Part 5: Class 1, 2 and 3 pressure retaining castings