H40 钢铁产品综合 标准查询与下载

KS D 3555-2008 钢管用热轧碳素钢带

이 표준은 용접 강관에 사용하는 열간 압연 강대(이하 강대라 한다.)에 대하여 규정한다.

Hot-rolled carbon steel strip for pipes and tubes

KS D 3541-2008 低温压力容器用碳素钢板

이 표준은 저온에서 사용하는 압력 용기 및 설비에 사용하는 열간 압연 탄소강 강판(이하 강

Carbon steel plates for pressure vessels for low temperature service

KS D 3585-2008 不锈钢卫生管道

이 표준은 낙농, 식품 공업 등에 사용하는 스테인리스강 위생관(이하 관이라 한다.)에 대하

Stainless steel sanitary tubing

DIN EN 10250-4 Berichtigung 1:2008 通用工程用开式模锻钢件.第4部分:不锈钢.技术勘误DIN EN 10250-4-2000

Open die steel forgings for general engineering purposes - Part 4: Stainless steels; German version EN 10250-4:1999, Corrigendum to DIN EN 10250-4:2000-02

KS B ISO 12209-3:2008 气瓶.压缩可呼吸空气用气瓶阀的放气连接器.第3部分:230巴阀适配器

이 표준은 호흡용 압축 공기 조정기를 위한 나사형 용기 밸브 출구를 요크형 출구로 바꾸는

Gas cylinders-Outlet connections for gas cylinder valves for compressed breathable air-Part 3:Adaptor for 230 bar valves

JIS G 0416 AMD 1:2008 钢和钢产品.机械测试用样品和试样的取样位置和制备(修改件1)

This translation has been made based on the Amendment to the origi- nal Japanese Industrial Standard revised by the Minister of Economy, Trade and Industry through deliberations at the Japanese Industrial Standards Committee as the result of proposal for revision of Japanese Industrial Standard with the draft being attached, based on the provi- sion of Article 12 Clause 1 of the Industrial Standardization Law ap" plicable to the case of revision by the provision of Article 14. Consequently, JIS G 0416:2006 is partially replaced with this Amend- ment.

Steel and steel products -- Location and preparation of samples and test pieces for mechanical testing (Amendment 1)

JIS G 4053:2008 机器结构用低合金钢

This Standard specifies the low-alloyed steels for machine structural use (hereafter referred to as "steels"), which are manufactured by hot forming such as hot rolling and hot forging. Steels are normally used after further forming such as forging and cutting and heat treatment or nitriding. NOTE 1 Depending on the thickness, steel plates and steel strip may include those subjected to cold rolling in addition to those manufactured by hot forming. NOTE 2 The International Standards corresponding to this Standard are as follows. ISO 683-1 : 1987 Heat-treatable steels, alloy steels and free-cutting steels--Part 1: Direct-hardening unalloyed and low-alloyed wrought steel in form of different black products ISO 683-10 : 1987 Heat-treatable steels, alloy steels and free-cutting steels--Part 10: Wrought nitriding steels ISO 683-11 : 1987 Heat-treatable steels, alloy steels and free-cutting steels Part 11: Wrought case-hardening steels (Overall evaluation : MOD) In addition, symbols which denote the degree of correspondence in the contents between the relevant International Standards and JIS are IDT (identical), MOD (modified), and NEQ (not equivalent) ac- cording to ISO/IEC Guide 21.

Low-alloyed steels for machine structural use

KS D 3552-2008 低碳钢丝

이 표준은 보통 철선, 못용 철선, 어닐링 철선 및 콘크리트용 철선(이하 선이라 한다.)에

Low carbon steel wires

KS D 3702-2008 不锈钢线材

이 표준은 스테인리스 강선재(이하 선재라 한다.)에 대하여 규정한다. 다만, 용접재료용 스

Stainless steel wire rods

KS D 9007-2008 铸铁锅

이 표준은 가정용 및 군용으로 사용되는 무쇠 솥(이하 무쇠 솥이라 한다.)에 대하여 규정한

Cast iron cooking pot

SAE AMS5518L-2008 拉伸强度为150ksi(1034 MPa)18Cr 8Ni冷轧钢制耐腐蚀薄板材和带材

This specification covers a corrosion-resistant steel in the form of sheet and strip. These products have been used typically for parts requiring strength and moderate forming and bending, but usage is not limited to such applications. Mechanical properties specified herein are obtained by cold working (strain hardening) and not by heat treatment. Therefore, the cold-worked product should not be heated to a temperature which adversely affects the mechanical properties or corrosion resistance before, during, or after fabrication.

Steel, Corrosion Resistant, Sheet and Strip 18Cr 8Ni Cold Rolled, 150 ksi (1034 MPa) Tensile Strength

SAE AMS5844G-2008 20Cr 35Ni 35Co 10Mo真空感应和真空自耗电极真空再熔炼溶解热处理和加工增强的耐腐蚀合金圆形棒材

This specification covers a high-strength, corrosion-resistant alloy in the form of bars. These bars have been used typically for applications requiring a combination of high strength, good tension-tension fatigue strength, toughness, ductility, and exceptionally good corrosion resistance after aging, but usage is not limited to such applications.

Alloy, Corrosion-Resistant, Round Bars 20Cr 35Ni 35Co 10Mo Vacuum Induction Plus Vacuum Consumable Electrode Vacuum Remelted Solution Heat Treated and Work Strengthened

SAE AMS5758H-2008 20Cr 35Ni 35Co 10Mo加工增强的真空感应和自耗电极真空再熔炼溶解热处理的耐腐蚀合金棒材

This specification covers a high-strength, corrosion-resistant alloy in the form of bars. These bars have been used typically for applications requiring a combination of high strength, good tension-tension fatigue strength, toughness, ductility, and exceptionally good corrosion resistance after work strenghtening and aging, but usage is not limited to such applications.

Alloy, Corrosion-Resistant, Bars 20Cr 35Ni 35Co 10Mo Vacuum Induction Plus Consumable Electrode Vacuum Remelted Solution Heat Treated for Work Strengthening

SAE AMS5845H-2008 20Cr 35Ni 35Co 10Mo真空感应和自耗电极真空再熔炼溶解热处理、加工增强和老化的耐腐蚀合金圆形棒材

This specification covers a high-strength, corrosion-resistant alloy in the form of bars. These bars have been used typically for parts requiring a combination of high strength, good tension-tension fatigue strength, toughness, ductility, and exceptionally good corrosion resistance, but usage is not limited to such applications.

Alloy, Corrosion-Resistant, Round Bars 20Cr 35Ni 35Co 10Mo Vacuum Induction Plus Consumable Electrode Vacuum Remelted Solution Heat Treated, Work Strengthened, and Aged

KS D 7014-2008 不锈钢涂敷焊条

이 표준은 크롬 11 % 이상 및 니켈 22 % 이하의 용착금속을 얻는 스테인리스강 피복

Stainless steel covered electrodes

KS D 7004-2008 低碳钢用涂料电焊条

이 표준은 연강의 용접에 사용하는 피복 아크 용접봉(이하 용접봉이라 한다.)에 대하여 규정

Covered electrodes for mild steel

KS D 7006-2008 高拉伸强度钢用涂敷焊条

이 표준은 인장강도 490N/mm2급에서 780N/mm2급까지의 고장력 강의 용접에 사용하

Covered electrodes for high tensile strength steel

EN 10213:2007/AC:2008 承压用铸钢件

Steel castings for pressure purposes

YB/T 4171-2008 含铜抗菌不锈钢

copper-containing antimicrobial stainless steel

BS EN 10084:2008 表面硬化钢.技术交付条件

1.1 This European Standard gives the technical delivery requirements for:  semi-finished products, hot formed, for example blooms, billets, slabs (see NOTE 2 and NOTE 3),  bars (see NOTE 2),  rod,  wide flats, quarto plates,  hot-rolled sheet/plate and strip,  hammer and drop forgings (see NOTE 2), manufactured from the case hardening non alloyed or alloyed steels (see NOTE 4) listed in Table 3 and supplied in one of the heat treatment conditions given for the different types of products in Table 1, lines 2 to 7 and in one of the surface conditions given in Table 2. The steels are in general intended for the fabrication of case-hardened (see Clause 3) machine parts. NOTE 1 European Standards relating to steels complying with the requirements for the chemical composition in Table 3 but which are supplied in other product forms or treatment conditions than given above or are intended for special applications, and European Standards for similar steel grades are listed in the Bibliography. NOTE 2 Hammer-forged semi-finished products (blooms, billets, slabs, etc.), seamless rolled rings and hammer-forged bars are included under semi-finished products or bars and not under the term "hammer and drop forgings". NOTE 3 Special agreements shall be made when ordering non-deformed continuously cast semi-finished products. NOTE 4 In accordance with EN 10020, the steels covered by this European Standard are special steels. 1.2 In special cases variations in these technical delivery requirements or additions to them may form the subject of an agreement at the time of enquiry and order (see Annex A). 1.3 In addition to the specifications of this European Standard, the general technical delivery requirements of EN 10021 are applicable, unless otherwise specified.

Case hardening steels - Technical delivery conditions