H54 其他钢铁产品 标准查询与下载

AIA/NAS NASM21067-1999 FSC 5310型450度F125 KSI Ftu钢低高度不固定100度CSK线路自动锁

aubrittleoeent accelerated anviromenntal reurabílíty and wench torque teats of relf-lockin8 nuts.

Nut, Self-Locking Gang Channel, 100 Degree CSK, Floating, Low Height, Steel, 125 KSI Ftu, 450 Degrees F

HB 5219.4-1998 镁合金化学分析方法 邻菲罗啉光度法测定铁含量

本标准规定了采用邻菲罗啉光度法测定镁合金中铁含量的方法原理、试剂、仪器、分析步骤、分析结果的计算和允许差。 　　本标准适用于镁合金中铁含量的测定。 　　测定范围：0.001％～0.20％

Magnesium alloy chemical analysis method o-phenanthroline spectrophotometric determination of iron content

HB 5219.5-1998 镁合金化学分析方法 原子吸收光谱分析法测定铁含量

本标准规定了原子吸收光谱法测定镁合金中铁含量的方法原理、试剂、仪器、分析步骤、分析结果的计算和允许差。 　　本标准适用于镁合金中铁含量的测定。 　　测定范围：0.01％～0.20％

Methods of chemical analysis of magnesium alloys - Determination of iron content by atomic absorption spectrometry

AIA/NAS NASM20995-1998 FSC 9505型保险锁丝

Wire, Safety or Lock FSC 9505

Wire, Safety or Lock

AIA/NAS NASM35812-1998 FSC 5340型钢尾部调节普通杆马蹄铁

Clevis, Rod, End-Adjustable and Plain, Steel FSC 5340

Clevis, Rod, End-Adjustable and Plain, Steel

KS D 0402-1997 钢铸件表面外形试验方法等级分类

이 규격은 사형 주강품의 기계 가공면 이외의 주물 표면의 겉모양 시험 방법 및 등급 분류에

Visual examination and classification of surface quality for steel castings

AIA/NAS NAS 380-1997 修正 14联邦科学委员会 CMAN.英寸系统单位下国家科学院文档准备与维护

Purpose. The standard practices established in this document provide means of obtaining uniformity in the preparation and maintenance of National Aerospace Standards prepared in inch system of units and shall be adhered to insofar as practicable. For preparation and maintenance of metric unit documents see NASl0000.

NAS Documents Preparation and Maintenance in the Inch System of Units FSC CMAN; Revision 14

AIA/NAS NAS 1554-1997 FSC 5325Rev. 3分离聚四氟乙烯索环

Grommet, PTFE-Split Revision 3; FSC 5325

Grommet, PTFE-Split Revision 3; FSC 5325

AIA/NAS NAS 550-1997 Rev. 6通用肘管安装装置

SEE PROCUREMENT SPECIFICATION, EXCEPT ALUMINUM ALLOY MATERIAL LIMITED TO 2014-T6 AND 2024T4 PER SPECIFICATIONS QQ-A-22514 TEMPER T6; QQ-A-20012 TEMPER T6; QQ-A-367, 2014-T6; QQ-A-20013 COND T4; QQ-A-22516 COND T4 AND QQ-A-25014 TEMPER T4

Fitting, Installation of Universal Elbow Rev 6

AIA/NAS NAS 1349-1997 Rev. 2刚性旋转轻型自位轮

Caster, Light Duty, Rigid and Swivel Rev. 2

Caster, Light Duty, Rigid and Swivel Rev. 2

YB/T 5150-1993 铸钢砂

Cast steel grit

YB/T 5152-1993 铸铁砂

cast iron sand

YB/T 5257-1993 F3701X（FT15）粉末冶金高速工具钢技术条件

F3701X (FT15) powder metallurgy high-speed tool steel technical conditions

YB/T 5258-1993 镍铁磁粉芯

Nickel Iron Magnetic Powder Core

YB/T 5138-1993 电焊条用还原铁粉

Reduced iron powder for welding rod

prEN 10213-2-1993 压力用途的钢铸件的交货技术条件.第2部分:环境温度和高温下使用的钢种

Technical delivery conditions for steel castings for pressure purposes; part 2: steel grades for use at ambient and elevated temperatures

prEN 10213-3-1993 压力用途的钢铸件的交货技术条件.第3部分:低温下使用的钢种

Technical delivery conditions for steel castings for pressure purposes; part 3: steel grades for use at low temperatures

prEN 10213-1-1993 压力用途的钢铸件的交货技术条件.第1部分:概述

Technical delivery conditions for steel castings for pressure purposes; part 1: general

prEN 10213-4-1993 压力用途的钢铸件的交货技术条件.第4部分:奥氏体和奥氏体-铁素体钢种

Technical delivery conditions for steel castings for pressure purposes; part 4: austenitic and austenitic-ferritic steel grades

KS D 0234-1992 包层钢试验方法

This Korean Industrial Standard specifies the testing methods for clad steel 8 mm or over in full thickness whose base metal is steel and cladding metal is stainless steel or non-ferrous metal, hereafter referred to as the "clad steel", used for pressure vessel, boiler, nuclear reactor, storage tank, etc. Remark 1. The units and numerical values given in { } in this Standard are based on the Traditional System of Units and are appended for informative reference. 2. The relative standard of this standard is equal to attached list.

Testing methods for clad steel