H60 有色金属及其合金产品综合 标准查询与下载

ASTM B635-00(2004)e1 镉锡机械沉积镀层标准规范

1.1 This specification covers the requirements for a coating that is a mixture of cadmium and tin mechanically deposited on metal products. The coating is provided in various thicknesses up to and including 12 m.1.2 Mechanical deposition greatly reduces the risk of hydrogen embrittlement and is suitable for coating bores and recesses in many parts that cannot be conveniently plated electrolytically. (See Appendix X1.)1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazards statements, see Section 7.

Standard Specification for Coatings of Cadmium-Tin Mechanically Deposited

ASME SEC II-B ADD-1999 BPVC.第II节.第B部分.非铁质材料规范.未归档

BPVC SECTION II Materials Part B - Nonferrous Material Specifications Non-Interfiled

BPVC SECTION II Materials Part B - Nonferrous Material Specifications Non-Interfiled

ASTM B898-99 活性和难溶金属复合板标准规范

1.1 This specification covers plate consisting of a base metal to which is bonded, integrally and continuously, on one or both sides a layer of one of the following: titanium, zirconium, tantalum, niobium, and their alloys. The material generally is intended for pressure vessel use. 1.2 The values stated in inch-pound units are to be regarded as the standard. The values in parentheses and in metric tables are provided for information only.

Standard Specification for Reactive and Refractory Metal Clad Plate

ASTM B899-99a 有色金属及合金的相关标准术语

1.1 To promote precise understanding and interpretation of standard, reports, and other technical writings promulgated by Committee B02. 1.2 To standardize the terminology used in these documents. 1.3 To explain the meanings of technical terms used within these documents for those not conversant with them.

Standard Terminology Relating to Non-ferrous Metals and Alloys

ASME SEC II-B-1998 BPVC.第II节.材料.第B部分.非铁质材料规范.未归档(锅炉和压力容器规范)

Boiler and Pressure Vessel.This part is a service book to the other Code Sections providing material specifications for nonferrous materials adequate for safety in the field of pressure equipment. These specifications contain requirements for heat treatment, manufacture, chemical composition, heat and product analyses, mechanical test requirements and mechanical properties, test specimens, and methods of testing. They are designated by SB numbers and are derived from ASTM "B" specifications.

BPVC SECTION II Materials Part B - Nonferrous Material Specifications Non-Interfiled(Boiler and Pressure Vessel Codes)

ASTM E703-98 有色金属的电磁(涡流)分类标准规程

1.1 This practice describes a procedure for sorting nonferrous metals using the electromagnetic (eddy-current) method. The procedure is intended for use with instruments using absolute or comparator-type coils for distinguishing variations in mass, shape, conductivity, and other variables such as alloy, heat treatment, or hardness that may be closely correlated with the electrical properties of the material. Selection of samples to evaluate sorting feasibility and to establish calibration standards is also described. 1.2 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Electromagnetic (Eddy-Current) Sorting of Nonferrous Metals

ASTM E703-98(2004)e1 有色金属的电磁(涡流)分类标准规程

Absolute and comparative methods provide a measure for sorting large quantities of nonferrous parts or stock with regard to composition or condition, or both. The comparative or two-coil method is used when high-sensitivity examination is required. The advantage of this method is that it almost completely suppresses interferences. The ability to accomplish these types of separations satisfactorily is dependent upon the relation of the electric characteristics of the nonferrous parts to their physical condition. These methods may be used for high-speed sorting in a fully automated setup where the speed of examination may approach many specimens per second depending on their size and shape. Successful sorting of nonferrous material depends mainly on the variables present in the sample and the proper selection of frequency and fill factor. The accuracy of a sort will be affected greatly by the coupling between the test coil field and the examined part during the measuring period.1.1 This practice describes a procedure for sorting nonferrous metals using the electromagnetic (eddy-current) method. The procedure is intended for use with instruments using absolute or comparator-type coils for distinguishing variations in mass, shape, conductivity, and other variables such as alloy, heat treatment, or hardness that may be closely correlated with the electrical properties of the material. Selection of samples to evaluate sorting feasibility and to establish standards is also described. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Electromagnetic (Eddy-Current) Sorting of Nonferrous Metals

ASME SEC II-B INT VOL 40-1997 说明.第40卷

BPVC SECTION II Materials Part B Interpretations Volume 40

Interpretations Volume 40

JIS H 0301:1997 有色金属的抽样、样品制备和分析检验的通用规则

この規格は,非鉄金属地金のサンプリング，試料調製及び分析検査に関する一般事項について現定する。

General rules for sampling, sample preparation and analytical testing of non-ferrous metals

BS EN 61249-5-1:1996 互连结构材料 带涂层和不带涂层的导电箔和薄膜的分规范集 铜箔（用于制造覆铜基材）

This specification gives requirements for properties of copper foil intended for use in the manufacture of copper-clad laminated sheets and of copper-clad flexible materials, used in the manufacture of printed boards. It applies to copper foil supplied in rolls, sheets or cut panels.

Materials for interconnection structures. Sectional specification set for conductive foils and films with and without coatings. Copper foils (for the manufacture of copper-clad base materials)

CB/T 102-1996 锡基合金轴瓦铸造技术条件

本标准规定了锡基轴承合金的技术要求、轴瓦基壳的要求、轴瓦的铸造工艺技术要求，以及轴瓦铸造质量的检验。 本标准适用于船用柴油机及船舶轴系衬套等锡荃合金轴瓦的铸造。

Tin-based alloy bearing bush casting technical conditions

BS EN 61249-7-1:1996 互连结构材料 约束芯材的截面规范集 铜/殷钢/铜

This specification gives the requirements for copper-clad Invar material for use in the fabrication of metal-clad laminated sheets, used for printed boards. The use of copper-clad Invar material in printed boards modifies some properties of the boards, for example thermal capacity and coefficient of thermal expansion. This specification covers copper-clad Invar material of nominal thickness from 0,1 mm to 2,4 mm. It applies mainly to copper-clad Invar material supplied in rolls, but by agreement between purchaser and supplier it may be applied to copper-clad Invar material produced in sheets.

Materials for interconnection structures. Sectional specification set for restraining core materials. Copper/invar/copper

YS/T 93-1996 膏状软钎料规范

Specification for Solder Paste

ASME SEC II-B INT VOL 36-1995 说明.第36卷

BPVC SECTION II Materials Part B Interpretations Volume 36

Interpretations Volume 36

YS/T 88-1995 铜、铅电解阳极泥化学分析方法 火试金重量法测定金量和银量

Method for chemical analysis of copper and lead electrolytic anode slime - Determination of gold and silver by fire test and gold gravimetric method

ANSI/ASTM B741:1995 纸电谱法测量金属基体上金涂层孔隙率的方法

This test method covers equipment and techniques for determining porosity in gold coatings, particularly electrodeposits and clad metals used on electrical contacts. This test method is designed to show whether the porosity level is less or greater than some value which by experience is considered by the user to be acceptable for the intended application. This test method is suitable for flat surfaces, or with appropriate fixtures, for gently curved surfaces. A variety of other porosity testing methods are described in Guide B765 and in the literature. Detailed critical reviews of porosity testing are also available. Other porosity test methods are B735, B798, B799 and B809. This test method is specifically designed for use with gold coatings (95% gold) on substrates of copper and nickel and their alloys. Although not covered in this standard, variations of this test method may be found useful in evaluating coatings other than gold. The values stated in SI units are to be regarded as standard. The values in parenthesis are for information only. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to its use. For a specific precautionary statement, see Note 1.

Test Method for Porosity in Gold Coatings on Metal Substrates by Paper Electrography

WJ 648-1995 光学仪器用有色合金压铸件规范

Specification for non-ferrous alloy die castings for optical instruments

WJ 642-1995 军用锡箔规范

Military Tin Foil Specifications

WJ 650-1995 光学仪器用有色合金砂型铸件规范

Specification for non-ferrous alloy sand castings for optical instruments

WJ 651-1995 光学仪器用有色合金金属型铸件规范

Specification for non-ferrous alloy metal mold castings for optical instruments