H64 稀有轻金属及其合金 标准查询与下载

YS/T 582-2013 电池级碳酸锂

本标准规定了电池级碳酸锂的要求、试验方法、检验规则、标志、包装、运输、贮存及质量证明书和合同(或订货单)内容、本标准适用于以各种方法生产的电池级碳酸锂、

Battery grade lithium carbonate

YS/T 886-2013 纯钛型材

本标准规定了纯钛型材的要求、试验方法、检验规则、标志、包装、运输、贮存和质量证明书以及合同(或订单)内容、本标准适用于冷轧法生产的,用于制作眼镜框架部件的纯钛型材、

Unalloyed titanium profiles

JIS H 4635 ERRATUM 1:2013 勘误表

ERRATUM

JIS H 4630 ERRATUM 1:2013 勘误表

ERRATUM

ASTM B338-13 冷凝器和热交换器用无缝和焊接钛及钛合金管标准规格

1.1 This specification2 covers the requirements for 28 grades of titanium and titanium alloy tubing intended for surface condensers, evaporators, and heat exchangers, as follows: 1.1.1 Grade 1—Unalloyed titanium, 1.1.2 Grade 2—Unalloyed titanium, 1.1.2.1 Grade 2H—Unalloyed titanium (Grade 2 with 58 ksi minimum UTS), 1.1.3 Grade 3—Unalloyed titanium, 1.1.4 Grade 7—Unalloyed titanium plus 0.12 to 0.258201;% palladium, 1.1.4.1 Grade 7H—Unalloyed titanium plus 0.12 to 0.258201;% palladium (Grade 7 with 58 ksi minimum UTS), 1.1.5 Grade 9—Titanium alloy (38201;% aluminum, 2.58201;% vanadium), 1.1.6 Grade 11—Unalloyed titanium plus 0.12 to 0.258201;% palladium, 1.1.7 Grade 12—Titanium alloy (0.38201;% molybdenum, 0.88201;% nickel), 1.1.8 Grade 13—Titanium alloy (0.58201;% nickel, 0.058201;% ruthenium), 1.1.9 Grade 14—Titanium alloy (0.58201;% nickel, 0.058201;% ruthenium), 1.1.10 Grade 15—Titanium alloy (0.58201;% nickel, 0.058201;% ruthenium), 1.1.11 Grade 16—Unalloyed titanium plus 0.04 to 0.088201;% palladium, 1.1.11.1 Grade 16H—Unalloyed titanium plus 0.04 to 0.088201;% palladium (Grade 16 with 58 ksi minimum UTS), 1.1.12 Grade 17—Unalloyed titanium plus 0.04 to 0.088201;% palladium, 1.1.13 Grade 18—Titanium alloy (38201;% aluminum, 2.58201;% vanadium) plus 0.04 to 0.088201;% palladium, 1.1.14 Grade 26—Unalloyed titanium plus 0.08 to 0.148201;% ruthenium, 1.1.14.1 Grade 26H—Unalloyed titanium plus 0.08 to 0.148201;% ruthenium (Grade 26 with 58 ksi minimum UTS), 1.1.15 Grade 27—Unalloyed titanium plus 0.08 to 0.148201;% ruthenium, 1.1.16 Grade 28—Titanium alloy (38201;% aluminum, 2.58201;% vanadium) plus 0.08 to 0.148201;% ruthenium, 1.1.17 Grade 30—Titanium alloy (0.38201;% cobalt, 0.058201;% palladium),

Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers

ASTM B265-13a 钛及钛合金带材、薄板材及板材标准规格

1.1 This specification2 covers annealed titanium and titanium alloy strip, sheet, and plate as follows: 1.1.1 Grade 1—UNS R50250. Unalloyed titanium, 1.1.2 Grade 2—UNS R50400. Unalloyed titanium, 1.1.2.1 Grade 2H—UNS R50400. Unalloyed titanium (Grade 2 with 58 ksi (400 MPa) minimum UTS), 1.1.3 Grade 3—UNS R50550. Unalloyed titanium, 1.1.4 Grade 4—UNS R50700. Unalloyed titanium, 1.1.5 Grade 5—UNS R56400. Titanium alloy (68201;% aluminum, 48201;% vanadium), 1.1.6 Grade 6—UNS R54520. Titanium alloy (58201;% aluminum, 2.58201;% tin), 1.1.7 Grade 7—UNS R52400. Unalloyed titanium plus 0.12 to 0.258201;% palladium, 1.1.7.1 Grade 7H—UNS R52400. Unalloyed titanium plus 0.12 to 0.258201;% palladium (Grade 7 with 58 ksi (400 MPa) minimum UTS), 1.1.8 Grade 9—UNS R56320. Titanium alloy (3.08201;% aluminum, 2.58201;% vanadium), 1.1.9 Grade 11—UNS R52250. Unalloyed titanium plus 0.12 to 0.258201;% palladium, 1.1.10 Grade 12—UNS R53400. Titanium alloy (0.38201;% molybdenum, 0.88201;% nickel), 1.1.11 Grade 13—UNS R53413. Titanium alloy (0.58201;% nickel, 0.058201;% ruthenium), 1.1.12 Grade 14—UNS R53414. Titanium alloy (0.58201;% nickel, 0.058201;% ruthenium), 1.1.13 Grade 15—UNS R53415. Titanium alloy (0.58201;% nickel, 0.058201;% ruthenium), 1.1.14 Grade 16—UNS R52402. Unalloyed titanium plus 0.04 to 0.088201;% palladium, 1.1.14.1 Grade 16H—UNS R52402. Unalloyed titanium plus 0.04 to 0.088201;% palladium (Grade 16 with 58 ksi (400 MPa) minimum UTS), 1.1.15 Grade 17—UNS R52252. Unalloyed titanium plus 0.04 to 0.088201;% palladium, 1.1.16 Grade 18—UNS R56322. Titanium alloy (38201;% aluminum, 2.58201;% vanadium) plus 0.04 to 0.088201;% palladium, 1.1.17 Grade 19—UNS R58640. Titanium alloy (38201;% aluminum, 88201;% vanadium, 68201;% chromium, 48201;% zirconium, 48201;% molybdenum), ......

Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate

ASTM B265-13 钛及钛合金带材、薄板材及板材标准规格

1.1 This specification2 covers annealed titanium and titanium alloy strip, sheet, and plate as follows: 1.1.1 Grade 1—Unalloyed titanium, 1.1.2 Grade 2—Unalloyed titanium, 1.1.2.1 Grade 2H—Unalloyed titanium (Grade 2 with 58 ksi minimum UTS), 1.1.3 Grade 3—Unalloyed titanium, 1.1.4 Grade 4—Unalloyed titanium, 1.1.5 Grade 5—Titanium alloy (68201;% aluminum, 48201;% vanadium), 1.1.6 Grade 6—Titanium alloy (58201;% aluminum, 2.58201;% tin), 1.1.7 Grade 7—Unalloyed titanium plus 0.12 to 0.258201;% palladium, 1.1.7.1 Grade 7H—Unalloyed titanium plus 0.12 to 0.258201;% palladium (Grade 7 with 58 ksi minimum UTS), 1.1.8 Grade 9—Titanium alloy (3.08201;% aluminum, 2.58201;% vanadium), 1.1.9 Grade 11—Unalloyed titanium plus 0.12 to 0.258201;% palladium, 1.1.10 Grade 12—Titanium alloy (0.38201;% molybdenum, 0.88201;% nickel), 1.1.11 Grade 13—Titanium alloy (0.58201;% nickel, 0.058201;% ruthenium), 1.1.12 Grade 14—Titanium alloy (0.58201;% nickel, 0.058201;% ruthenium), 1.1.13 Grade 15—Titanium alloy (0.58201;% nickel, 0.058201;% ruthenium), 1.1.14 Grade 16—Unalloyed titanium plus 0.04 to 0.088201;% palladium, 1.1.14.1 Grade 16H—Unalloyed titanium plus 0.04 to 0.088201;% palladium (Grade 16 with 58 ksi minimum UTS), 1.1.15 Grade 17—Unalloyed titanium plus 0.04 to 0.088201;% palladium, 1.1.16 Grade 18—Titanium alloy (38201;% aluminum, 2.58201;% vanadium) plus 0.04 to 0.088201;% palladium, 1.1.17 Grade 19—Titanium alloy (38201;% aluminum, 88201;% vanadium, 68201;% chromium, 48201;% zirconium, 48201;% molybdenum), 1.1.18 Grade 20—Titanium alloy (38201;% aluminum, 88201;% vanadium, 68201;% chromium, 48201;% zirconium, 48201;% molybdenum) plus 0.048201;% to 0.088201;% palladium, ......

Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate

ASTM B348-13 钛及钛合金棒和坯锭的标准规格

1.1 This specification2 covers annealed titanium and titanium alloy bars and billets as follows: 1.1.1 Grade 1—UNS R50250. Unalloyed titanium, 1.1.2 Grade 2—UNS R50400. Unalloyed titanium, 1.1.2.1 Grade 2H—UNS R50400. Unalloyed titanium (Grade 2 with 58 ksi (400 MPa) minimum UTS), 1.1.3 Grade 3—UNS R50550. Unalloyed titanium, 1.1.4 Grade 4—UNS R50700. Unalloyed titanium, 1.1.5 Grade 5—UNS R56400. Titanium alloy (68201;% aluminum, 48201;% vanadium), 1.1.6 Grade 6—UNS R54520. Titanium alloy (58201;% aluminum, 2.58201;% tin), 1.1.7 Grade 7—UNS R52400. Unalloyed titanium plus 0.12 to 0.258201;% palladium, 1.1.7.1 Grade 7H—UNS R52400. Unalloyed titanium plus 0.12 to 0.258201;% palladium (Grade 7 with 58 ksi (400 MPa) minimum UTS), 1.1.8 Grade 9—UNS R56320. Titanium alloy (38201;% aluminum, 2.58201;% vanadium), 1.1.9 Grade 11—UNS R52250. Unalloyed titanium plus 0.12 to 0.258201;% palladium, 1.1.10 Grade 12—UNS R53400. Titanium alloy (0.38201;% molybdenum, 0.88201;% nickel), 1.1.11 Grade 13—UNS R53413. Titanium alloy (0.58201;% nickel, 0.058201;% ruthenium), 1.1.12 Grade 14—UNS R53414. Titanium alloy (0.58201;% nickel, 0.058201;% ruthenium), 1.1.13 Grade 15—UNS R53415. Titanium alloy (0.58201;% nickel, 0.058201;% ruthenium), 1.1.14 Grade 16—UNS R52402. Unalloyed titanium plus 0.04 to 0.088201;% palladium, 1.1.14.1 Grade 16H—UNS R52402. Unalloyed titanium plus 0.04 to 0.088201;% palladiumm (Grade 16 with 58 (400 MPa) ksi minimum UTS), 1.1.15 Grade 17—UNS R52252. Unalloyed titanium plus 0.04 to 0.088201;% palladium, 1.1.16 Grade 18—UNS R56322. Titanium alloy (38201;% aluminum, 2.58201;% vanadium) plus 0.04 to 0.088201;% palladium, 1.1.17 Grade 19—UNS R58640. Titanium alloy (38201;% aluminum, 88201;% vanadium, 68201;% chromium, 48201;% zirconium, 48201;% molybdenum), 1.1.......

Standard Specification for Titanium and Titanium Alloy Bars and Billets

ASTM B367-13 钛和钛合金铸件的标准规格

1.1 This specification covers titanium and titanium alloy castings intended for general corrosion resistant and industrial applications. as follows: 1.1.1 Grade C-2—UNS R52550. Unalloyed titanium, 1.1.2 Grade C-3—UNS R52550. Unalloyed titanium, 1.1.3 Grade C-5—UNS R56400. Titanium alloy (6 % aluminum, 4 % vanadium), 1.1.4 Grade C-7—UNS R52700. Unalloyed titanium plus 0.12 to 0.25 % palladium, 1.1.5 Grade C-8—UNS R52700. Unalloyed titanium plus 0.12 to 0.25 % palladium, 1.1.6 Grade C-9—UNS R56320. Titanium alloy (3 % aluminum, 2.5 % vanadium), 1.1.7 Grade C-12—UNS R53400. Titanium alloy (0.3 % molybdenum, 0.8 % nickel), 1.1.8 Grade C-16—UNS R52402. Unalloyed titanium plus 0.04 to 0.08 % palladium, 1.1.9 Grade C-17—UNS R52252. Unalloyed titanium plus 0.04 to 0.08 % palladium, and 1.1.10 Grade C-38—UNS R54250. Titanium alloy (4 % aluminum, 2.5 % vanadium, 1.5 % iron). 1.2 This specification is intended for use of purchasers and/or producers of reactive metal castings for defining the requirements and assuring the properties of castings for unique corrosion-resistant applications, that is, not for commodity items which must meet all potential purchasers' requirements. 1.2.1 Users are advised to use the specification as a basis for obtaining castings which will meet minimum acceptance requirements established and revised by consensus of the members of the committee. 1.2.2 User requirements considered more stringent may be met by the addition to the purchase order of one or more supplementary requirements, which may include, but are not limited to, those listed in Sections S1 through S8. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

Standard Specification for Titanium and Titanium Alloy Castings

ASTM B862-13 钛和钛合金焊接管的标准规格

1.1 This specification covers the requirements for 33 grades of titanium and titanium alloy welded pipe intended for general corrosion resisting and elevated temperature service as follows: 1.1.1 Grade 1—Unalloyed titanium, low oxygen, 1.1.2 Grade 2—Unalloyed titanium, standard oxygen, 1.1.2.1 Grade 2H—Unalloyed titanium (Grade 2 with 58 ksi minimum UTS), 1.1.3 Grade 3—Unalloyed titanium, medium oxygen, 1.1.4 Grade 5—Titanium alloy (68201;% aluminum, 48201;% vanadium), 1.1.5 Grade 7—Unalloyed titanium plus 0.12 to 0.258201;% palladium, standard oxygen, 1.1.5.1 Grade 7H—Unalloyed titanium plus 0.12 to 0.258201;% palladium (Grade 7 with 58 ksi minimum UTS), 1.1.6 Grade 9—Titanium alloy (38201;% aluminum, 2.58201;% vanadium), 1.1.7 Grade 11—Unalloyed titanium plus 0.12 to 0.258201;% palladium, low oxygen, 1.1.8 Grade 12—Titanium alloy (0.38201;% molybdenum, 0.88201;% nickel), 1.1.9 Grade 13—Titanium alloy (0.58201;% nickel, 0.058201;% ruthenium), low oxygen, 1.1.10 Grade 14—Titanium alloy (0.58201;% nickel, 0.058201;% ruthenium), standard oxygen, 1.1.11 Grade 15—Titanium alloy (0.58201;% nickel, 0.058201;% ruthenium), medium oxygen, 1.1.12 Grade 16—Unalloyed titanium plus 0.04 to 0.088201;% palladium, standard oxygen, 1.1.12.1 Grade 16H—Unalloyed titanium plus 0.04 to 0.088201;% palladium (Grade 16 with 58 ksi minimum UTS), 1.1.13 Grade 17—Unalloyed titanium plus 0.04 to 0.088201;% palladium, low oxygen, 1.1.14 Grade 18—Titanium alloy (38201;% aluminum, 2.58201;% vanadium plus 0.04 to 0.088201;% palladium), 1.1.15 Grade 19—Titanium alloy (38201;% aluminum, 88201;% vanadium, 68201;% chromium, 48201;% zirconium, 48201;% molybdenum), 1.1.16 Grade 20—Titanium alloy (38201;% aluminum, 88201;% vanadium, 68201;% chromium, 48201;% zirconium, 48201;% molybdenum) plus 0.04 to 0.088201;% palladium, 1.1.17 Grade 21—Titanium alloy (158201;% molybdenum, 38201;% aluminum, 2.78201;% niobium, 0.258201;% silicon),

Standard Specification for Titanium and Titanium Alloy Welded Pipe

ASTM B863-13a 钛和钛合金丝的标准规格

1.1 This specification covers titanium and titanium alloy wire as follows: 1.1.1 Grade 1—UNS R50250. Unalloyed titanium, low oxygen, 1.1.2 Grade 2—UNS R50400. Unalloyed titanium, standard oxygen, 1.1.2.1 Grade 2H—UNS R50400. Unalloyed titanium (Grade 2 with 58 ksi (400 MPa) minimum UTS), 1.1.3 Grade 3—UNS R50550. Unalloyed titanium, medium oxygen, 1.1.4 Grade 4—UNS R50700. Unalloyed titanium, high oxygen, 1.1.5 Grade 5—UNS R56400. Titanium alloy (68201;% aluminum, 48201;% vanadium), 1.1.6 Grade 6—UNS R54520. Titanium alloy (58201;% aluminum, 2.58201;% tin), 1.1.7 Grade 7—UNS R52400. Unalloyed titanium plus 0.12 to 0.258201;% palladium, standard oxygen, 1.1.7.1 Grade 7H—UNS R52400. Unalloyed titanium plus 0.12 to 0.258201;% palladium (Grade 7 with 58 ksi (400 MPa) minimum UTS), 1.1.8 Grade 9—UNS R56320. Titanium alloy (38201;% aluminum, 2.58201;% vanadium), 1.1.9 Grade 11—UNS R52250. Unalloyed titanium plus 0.12 to 0.258201;% palladium, low oxygen, 1.1.10 Grade 12—UNS R53400. Titanium alloy (0.38201;% molybdenum, 0.88201;% nickel), 1.1.11 Grade 13—UNS R53413. Titanium alloy (0.58201;% nickel, 0.058201;% ruthenium), 1.1.12 Grade 14—UNS R53414. Titanium alloy (0.58201;% nickel, 0.058201;% ruthenium), 1.1.13 Grade 15—UNS R53415. Titanium alloy (0.58201;% nickel, 0.058201;% ruthenium), 1.1.14 Grade 16—UNS R52402. Unalloyed titanium plus 0.04 to 0.088201;% palladium, standard oxygen, 1.1.14.1 Grade 16H—UNS R52402. Unalloyed titanium plus 0.04 to 0.088201;% palladium (Grade 16 with 58 ksi (400 MPa) minimum UTS), 1.1.15 Grade 17—UNS R52252. Unalloyed titanium plus 0.04 to 0.088201;% palladium, low oxygen, 1.1.16 Grade 18—UNS R56322. Titanium alloy (38201;% aluminum, 2.58201;% vanadium) plus 0.04 to 0.088201;% palladium, 1.1.17 Grade 19—UNS R58640. Titanium alloy (38201;% aluminum, 88201;% vanadium, 68201;% chromium, 48201;% zirconium, 48201;% molybdenum),

Standard Specification for Titanium and Titanium Alloy Wire

ASTM B299-13 海绵钛标准规格

1.1 This specification covers the purchase of virgin titanium sponge metal. This virgin metal is commonly designated as titanium sponge because it is most commonly porous and sponge-like in texture, although metal produced electrolytically is granular and is essentially nonporous. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

Standard Specification for Titanium Sponge

ASTM B977-13 钛及钛铸块标准规格

1.1 This specification covers titanium and titanium alloy ingots as follows: 1.1.1 Grade 1—UNS R50250. Unalloyed titanium, 1.1.2 Grade 2—UNS R50400. Unalloyed titanium, 1.1.3 Grade 3—UNS R50550. Unalloyed titanium, 1.1.4 Grade 4—UNS R50700. Unalloyed titanium, 1.1.5 Grade 5—UNS R56400. Titanium alloy (68201;% aluminum, 48201;% vanadium), 1.1.6 Grade 6—UNS R54520. Titanium alloy (58201;% aluminum, 2.58201;% tin), 1.1.7 Grade 7—UNS R52400. Unalloyed titanium plus 0.12 to 0.258201;% palladium, 1.1.8 Grade 9—UNS R56320. Titanium alloy (38201;% aluminum, 2.58201;% vanadium), 1.1.9 Grade 11—UNS R52250. Unalloyed titanium plus 0.12 to 0.258201;% palladium, 1.1.10 Grade 12—UNS R53400. Titanium alloy (0.38201;% molybdenum, 0.88201;% nickel), 1.1.11 Grade 13—UNS R53413. Titanium alloy (0.58201;% nickel, 0.058201;% ruthenium), 1.1.12 Grade 14—UNS R53414. Titanium alloy (0.58201;% nickel, 0.058201;% ruthenium), 1.1.13 Grade 15—UNS R53415. Titanium alloy (0.58201;% nickel, 0.058201;% ruthenium), 1.1.14 Grade 16—UNS R52402. Unalloyed titanium plus 0.04 to 0.088201;% palladium, 1.1.15 Grade 17—UNS R52252. Unalloyed titanium plus 0.04 to 0.088201;% palladium, 1.1.16 Grade 18—UNS R56322. Titanium alloy (38201;% aluminum, 2.58201;% vanadium) plus 0.04 to 0.088201;% palladium, 1.1.17 Grade 19—UNS R58640. Titanium alloy (38201;% aluminum, 88201;% vanadium, 68201;% chromium, 48201;% zirconium, 48201;% molybdenum), 1.1.18 Grade 20—UNS R58645. Titanium alloy (38201;% aluminum, 88201;% vanadium, 68201;% chromium, 48201;% zirconium, 48201;% molybdenum) plus 0.04 to 0.088201;% palladium, 1.1.19 Grade 21—UNS R58210. Titanium alloy (158201;% molybdenum, 38201;% aluminum, 2.78201;% niobium, 0.258201;% silicon), 1.1.20 Grade 23—UNS R56407. Titanium alloy (68201;% aluminum, 48201;% vanadium with extra low interstitials, ELI), 1.1.21 Grade 24—UNS......

Standard Specification for Titanium and Titanium Ingots

ASTM B861-13 钛和钛合金无缝管标准规格

1.1 This specification covers the requirements for 34 grades of titanium and titanium alloy seamless pipe intended for general corrosion resisting and elevated temperature service as follows: 1.1.1 Grade 1—UNS R50250. Unalloyed titanium, low oxygen, 1.1.2 Grade 2—UNS R50400. Unalloyed titanium, standard oxygen, 1.1.2.1 Grade 2H—UNS R50400. Unalloyed titanium (Grade 2 with 58 ksi (400 MPa) minimum UTS), 1.1.3 Grade 3—UNS R50550. Unalloyed titanium, medium oxygen, 1.1.4 Grade 5—UNS R56400. Titanium alloy (68201;% aluminum, 48201;% vanadium), 1.1.5 Grade 7—UNS R52400. Unalloyed titanium plus 0.12 to 0.258201;% palladium, standard oxygen, 1.1.5.1 Grade 7H—UNS R52400. Unalloyed titanium plus 0.12 to 0.258201;% palladium (Grade 7 with 58 ksi (400 MPa) minimum UTS), 1.1.6 Grade 9—UNS R56320. Titanium alloy (38201;% aluminum, 2.58201;% vanadium), 1.1.7 Grade 11—UNS R52250. Unalloyed titanium plus 0.12 to 0.258201;% palladium, low oxygen, 1.1.8 Grade 12—UNS R53400. Titanium alloy (0.38201;% molybdenum, 0.88201;% nickel), 1.1.9 Grade 13—UNS R53413. Titanium alloy (0.58201;% nickel, 0.058201;% ruthenium), low oxygen, 1.1.10 Grade 14—UNS R53414. Titanium alloy (0.58201;% nickel, 0.058201;% ruthenium), standard oxygen, 1.1.11 Grade 15—UNS R53415. Titanium alloy (0.58201;% nickel, 0.058201;% ruthenium), medium oxygen, 1.1.12 Grade 16—UNS R52402. Unalloyed titanium plus 0.04 to 0.088201;% palladium, standard oxygen, 1.1.12.1 Grade 16H—UNS R52402. Unalloyed titanium plus 0.04 to 0.088201;% palladium (Grade 16 with 58 ksi (400 MPa) minimum UTS), 1.1.13 Grade 17—UNS R52252. Unalloyed titanium plus 0.04 to 0.088201;% palladium, low oxygen, 1.1.14 Grade 18—UNS R56322. Titanium alloy (38201;% aluminum, 2.58201;% vanadium plus 0.04 to 0.088201;% palladium), 1.1.15 Grade 19—UNS R58640. Titanium alloy (38201;% aluminum, 88201;% vanadium, 68201;% chromium, 48201;% zirconium, 48201;% molybdenum), 1.1.16 Grade 20—UNS R58645. Titanium alloy (38201;% aluminum, 88201;% vanadium, 68201;% chromium, 48201;% zirconium, 48201;% molybdenum) plus 0.04 ......

Standard Specification for Titanium and Titanium Alloy Seamless Pipe

ASTM B338-13a 冷凝器和热交换器用无缝和焊接钛及钛合金管标准规格

1.1 This specification2 covers the requirements for 28 grades of titanium and titanium alloy tubing intended for surface condensers, evaporators, and heat exchangers, as follows: 1.1.1 Grade 1—UNS R50250. Unalloyed titanium, 1.1.2 Grade 2—UNS R50400. Unalloyed titanium, 1.1.2.1 Grade 2H—UNS R50400. Unalloyed titanium (Grade 2 with 58 ksi (400 MPa) minimum UTS), 1.1.3 Grade 3—UNS R50550. Unalloyed titanium, 1.1.4 Grade 7—UNS R52400. Unalloyed titanium plus 0.12 to 0.258201;% palladium, 1.1.4.1 Grade 7H—UNS R52400. Unalloyed titanium plus 0.12 to 0.258201;% palladium (Grade 7 with 58 ksi (400 MPa) minimum UTS), 1.1.5 Grade 9—UNS R56320. Titanium alloy (38201;% aluminum, 2.58201;% vanadium), 1.1.6 Grade 11—UNS R52250. Unalloyed titanium plus 0.12 to 0.258201;% palladium, 1.1.7 Grade 12—UNS R53400. Titanium alloy (0.38201;% molybdenum, 0.88201;% nickel), 1.1.8 Grade 13—UNS R53413. Titanium alloy (0.58201;% nickel, 0.058201;% ruthenium), 1.1.9 Grade 14—UNS R53414. Titanium alloy (0.58201;% nickel, 0.058201;% ruthenium), 1.1.10 Grade 15—UNS R53415. Titanium alloy (0.58201;% nickel, 0.058201;% ruthenium), 1.1.11 Grade 16—UNS R52402. Unalloyed titanium plus 0.04 to 0.088201;% palladium, 1.1.11.1 Grade 16H—UNS R52402. Unalloyed titanium plus 0.04 to 0.088201;% palladium (Grade 16 with 58 ksi (400 MPa) minimum UTS), 1.1.12 Grade 17—UNS R52252. Unalloyed titanium plus 0.04 to 0.088201;% palladium, 1.1.13 Grade 18—UNS R56322. Titanium alloy (38201;% aluminum, 2.58201;% vanadium) plus 0.04 to 0.088201;% palladium, 1.1.14 Grade 26—UNS R52404. Unalloyed titanium plus 0.08 to 0.148201;% ruthenium, 1.1.14.1 Grade 26H—UNS R52404. Unalloyed titanium plus 0.08 to 0.148201;% ruthenium (Grade 26 with 58 ksi (400 MPa) minimum UTS), 1.1.15 Grade 27—UNS R52254. Unalloyed titanium plus 0.08 to 0.148201;% ruthenium, 1.1.16 Grade 28—UNS R56323. Titanium alloy (38201;% alu......

Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers

ASTM B863-13 钛和钛合金丝的标准规格

1.1 This specification covers titanium and titanium alloy wire as follows: 1.1.1 Grade 1—Unalloyed titanium, low oxygen, 1.1.2 Grade 2—Unalloyed titanium, standard oxygen, 1.1.2.1 Grade 2H—Unalloyed titanium (Grade 2 with 58 ksi minimum UTS), 1.1.3 Grade 3—Unalloyed titanium, medium oxygen, 1.1.4 Grade 4—Unalloyed titanium, high oxygen, 1.1.5 Grade 5—Titanium alloy (68201;% aluminum, 48201;% vanadium), 1.1.6 Grade 6—Titanium alloy (58201;% aluminum, 2.58201;% tin), 1.1.7 Grade 7—Unalloyed titanium plus 0.12 to 0.258201;% palladium, standard oxygen, 1.1.7.1 Grade 7H—Unalloyed titanium plus 0.12 to 0.258201;% palladium (Grade 7 with 58 ksi minimum UTS), 1.1.8 Grade 9—Titanium alloy (38201;% aluminum, 2.58201;% vanadium), 1.1.9 Grade 11—Unalloyed titanium plus 0.12 to 0.258201;% palladium, low oxygen, 1.1.10 Grade 12—Titanium alloy (0.38201;% molybdenum, 0.88201;% nickel), 1.1.11 Grade 13—Titanium alloy (0.58201;% nickel, 0.058201;% ruthenium), 1.1.12 Grade 14—Titanium alloy (0.58201;% nickel, 0.058201;% ruthenium), 1.1.13 Grade 15—Titanium alloy (0.58201;% nickel, 0.058201;% ruthenium), 1.1.14 Grade 16—Unalloyed titanium plus 0.04 to 0.088201;% palladium, standard oxygen, 1.1.14.1 Grade 16H—Unalloyed titanium plus 0.04 to 0.088201;% palladium (Grade 16 with 58 ksi minimum UTS), 1.1.15 Grade 17—Unalloyed titanium plus 0.04 to 0.088201;% palladium, low oxygen, 1.1.16 Grade 18—Titanium alloy (38201;% aluminum, 2.58201;% vanadium) plus 0.04 to 0.088201;% palladium, 1.1.17 Grade 19—Titanium alloy (38201;% aluminum, 88201;% vanadium, 68201;% chromium, 48201;% zirconium, 48201;% molybdenum), 1.1.18 Grade 20—Titanium alloy (38201;% aluminum, 88201;% vanadium, 68201;% chromium, 48201;% zirconium, 48201;% molybdenum) plus 0.04 to 0.088201;% palladium, 1.1.1......

Standard Specification for Titanium and Titanium Alloy Wire

ASTM B367-13(2017) 钛及钛合金铸件的标准规格

1.1 This specification covers titanium and titanium alloy castings intended for general corrosion resistant and industrial applications. as follows: 1.1.1 Grade C-2—UNS R52550. Unalloyed titanium, 1.1.2 Grade C-3—UNS R52550. Unalloyed titanium, 1.1.3 Grade C-5—UNS R56400. Titanium alloy (6 % aluminum, 4 % vanadium), 1.1.4 Grade C-7—UNS R52700. Unalloyed titanium plus 0.12 to 0.25 % palladium, 1.1.5 Grade C-8—UNS R52700. Unalloyed titanium plus 0.12 to 0.25 % palladium, 1.1.6 Grade C-9—UNS R56320. Titanium alloy (3 % aluminum, 2.5 % vanadium), 1.1.7 Grade C-12—UNS R53400. Titanium alloy (0.3 % molybdenum, 0.8 % nickel), 1.1.8 Grade C-16—UNS R52402. Unalloyed titanium plus 0.04 to 0.08 % palladium, 1.1.9 Grade C-17—UNS R52252. Unalloyed titanium plus 0.04 to 0.08 % palladium, and 1.1.10 Grade C-38—UNS R54250. Titanium alloy (4 % aluminum, 2.5 % vanadium, 1.5 % iron). 1.2 This specification is intended for use of purchasers and/or producers of reactive metal castings for defining the requirements and assuring the properties of castings for unique corrosion-resistant applications, that is, not for commodity items which must meet all potential purchasers’ requirements. 1.2.1 Users are advised to use the specification as a basis for obtaining castings which will meet minimum acceptance requirements established and revised by consensus of the members of the committee. 1.2.2 User requirements considered more stringent may be met by the addition to the purchase order of one or more supplementary requirements, which may include, but are not limited to, those listed in Sections S1 through S8. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This international standard was developed in accor

Standard Specification for Titanium and Titanium Alloy Castings

ASTM B862-13a 钛和钛合金焊接管的标准规格

1.1 This specification covers the requirements for 33 grades of titanium and titanium alloy welded pipe intended for general corrosion resisting and elevated temperature service as follows: 1.1.1 Grade 1—UNS R50250. Unalloyed titanium, low oxygen, 1.1.2 Grade 2—UNS R50400. Unalloyed titanium, standard oxygen, 1.1.2.1 Grade 2H—UNS R50400. Unalloyed titanium (Grade 2 with 58 ksi (400 MPa) minimum UTS), 1.1.3 Grade 3—UNS R50550. Unalloyed titanium, medium oxygen, 1.1.4 Grade 5—UNS R56400. Titanium alloy (68201;% aluminum, 48201;% vanadium), 1.1.5 Grade 7—UNS R52400. Unalloyed titanium plus 0.12 to 0.258201;% palladium, standard oxygen, 1.1.5.1 Grade 7H—UNS R52400. Unalloyed titanium plus 0.12 to 0.258201;% palladium (Grade 7 with 58 ksi (400 MPa) minimum UTS), 1.1.6 Grade 9—UNS R56320. Titanium alloy (38201;% aluminum, 2.58201;% vanadium), 1.1.7 Grade 11—UNS R52250. Unalloyed titanium plus 0.12 to 0.258201;% palladium, low oxygen, 1.1.8 Grade 12—UNS R53400. Titanium alloy (0.38201;% molybdenum, 0.88201;% nickel), 1.1.9 Grade 13—UNS R53413. Titanium alloy (0.58201;% nickel, 0.058201;% ruthenium), low oxygen, 1.1.10 Grade 14—UNS R53414. Titanium alloy (0.58201;% nickel, 0.058201;% ruthenium), standard oxygen, 1.1.11 Grade 15—UNS R53415. Titanium alloy (0.58201;% nickel, 0.058201;% ruthenium), medium oxygen, 1.1.12 Grade 16—UNS R52402. Unalloyed titanium plus 0.04 to 0.088201;% palladium, standard oxygen, 1.1.12.1 Grade 16H—UNS R52402. Unalloyed titanium plus 0.04 to 0.088201;% palladium (Grade 16 with 58 ksi (400 MPa) minimum UTS), 1.1.13 Grade 17—UNS R52252. Unalloyed titanium plus 0.04 to 0.088201;% palladium, low oxygen, 1.1.14 Grade 18—UNS R56322. Titanium alloy (38201;% aluminum, 2.58201;% vanadium plus 0.04 to 0.088201;% palladium), 1.1.15 Grade 19—UNS R58640. Titanium alloy (38201;% aluminum, 88201;% vanadium, 68201;% chromium, 48201;% zirconium, 48201;% molybdenum), 1.1.16 Grade 20—UNS R58645. Titanium alloy (38201;% aluminum, 88201;% vanadium, 68201;% chromium, 48201;% zirconium, 48201;% molybdenum) plus 0.04 to......

Standard Specification for Titanium and Titanium Alloy Welded Pipe

YS/T 828-2012 土壤及淡水环境阴极保护用钛阳极

本标准规定了土壤及淡水环境外加电流阴极保护用钛阳极的要求、试验方法、检验规则和标志、包装、运输、贮存及质量证明书与合同（或订货单）内容。 本标准适用于以土壤、细沙、淡水为使用环境，以铱为涂层主体，以钛为基体的金属阳极产品。

Titanium anodes for use in cathodic protection of soils or natural waters

KS D 2353-2012 海绵钛

이 표준은 전신재 및 주조품에 사용하는 스펀지 타이타늄에 대하여 규정한다.

Titanium sponge