H64 稀有轻金属及其合金 标准查询与下载

YS/T 360.6-2011 钛铁矿精矿化学分析方法.第6部分：氧化钙、氧化镁、磷量的测定.等离子体发射光谱法

本部分规定了钛铁矿精矿中氧化钙、氧化镁、磷量的测定方法。 本部分适用于钛铁矿精矿中氧化钙、氧化镁、磷量的测定，测定范围为氧化钙0.02%～2.00%；氧化镁0.02%～3.00%；磷0.001%～0.10%。

Methods of chemical analysis for ilmenite concentrate.Part 6:Determination of calcium oxide、magnesium oxide、phosphorus content.Inductively coupled plasma atomic emission spectrometry

YS/T 360.5-2011 钛铁矿精矿化学分析方法.第5部分：二氧化硅量的测定.硅钼蓝分光光度法

YS/T 360的本部分规定了钛铁矿精矿中二氧化硅量的测定方法。 本部分适用于钛铁矿精矿中二氧化硅量的测定。测定范围为0.50%～5.00%。

Methods of chemical analysis for ilmenite concentrate.Part 5:Determination of silicon dioxide content.molybdenum blue spectrophotometry

YS/T 777-2011 锆-钢复合板

本标准规定了爆炸复合法和爆炸-轧制复合法生产的锆-钢复合板（以下简称复合板）的要求、试验方法、检验规则和标志、包装、运输、贮存、质量证明书及合同（或订货单）内容。 本标准适用于耐蚀压力容器贮槽及其他用途的锆-钢爆炸复合板和爆炸-轧制复合板。

Zirconium clad steel plate

YS/T 360.3-2011 钛铁矿精矿化学分析方法.第3部分：氧化亚铁量的测定.重铬酸钾滴定法

YS/T 360的本部分规定了钛铁矿精矿中氧化亚铁量的测定方法。 本部分适用于钛铁矿精矿中氧化亚铁量的测定。测定范围为1.00%～40.00%。 本部分适用于含铬、钒量不大于3mg,钼，钨量不大于2mg,锡、铜量不大于1mg的试料中氧化亚铁量的测定。

Methods of chemical analysis for ilmenite concentrate.Part 3:Determination of ferrous oxide content.Potassium dichromate titrimetric method

YS/T 360.2-2011 钛铁矿精矿化学分析方法.第2部分：全铁量的测定.重铬酸钾滴定法

YS/T 360的本部分规定了钛铁矿精矿中全铁量的测定方法。 本部分适用于钛铁矿精矿中全铁量的测定。测定范围为1.00%～45.00%。

Methods of chemical analysis for ilmenite concentrate.Part 2:Determination of total iron content.Potassium dichromate titration

YS/T 360.1-2011 钛铁矿精矿化学分析方法.第1部分：二氧化钛量的测定.硫酸铁铵滴定法

YS/T 360的本部分规定了钛铁矿精矿中二氧化钛量的测定方法。 本部分适用于钛铁矿精矿中二氧化钛量的测定。测定范围为30.00%～70.00%。

Methods of chemical analysis for ilmenite concentrate.Part 1:Determination of titamium dioxide content.Ferric ammonium sulfate titration

YS/T 360.4-2011 钛铁矿精矿化学分析方法.第4部分：氧化铝量的测定.EDTA滴定法

YS/T 360的本部分规定了钛铁矿精矿中氧化铝量的测定方法。 本部分适用于钛铁矿精矿中氧化铝量的测定。测定范围为0.50%～5.00%。

Methods of chemical analysis for ilmenite concentrate.Part 4:Determination of aluminum oxide content.EDTA titration

YS/T 776-2011 钛合金用铝硅中间合金

本标准规定了钛合金用铝硅中间合金的要求、试验方法、检验规则、标志、包装、运输、贮存、质量证明书和合同（或订货单）等内容。 本标准适用于钛合金用铝硅中间合金。

Aluminum-silicon masteralloy for titanium alloy

YS/T 261-2011 锂辉石精矿

本标准规定了锂辉石精矿的要求、试验方法、检验规则及标志、包装、运输、贮存、质量证明书和合同（或订货单）内容。 本标准适用于采用各种选矿方法富集而获得的锂辉石精矿。该锂辉石精矿广泛用于玻璃陶瓷行业和生产锂的各种化工产品。

Spodumene concentrate

YS/T 221-2011 金属铍珠

本标准规定了金属铍珠的要求、试验方法、检验规则及标志、包装、运输、贮存、质量证明书和合同（或订货单）内容。 本标准适用于氟化铍镁热还原法制得的金属铍珠。

Beryllium metal pebbles

YS/T 756-2011 碳酸铯

本标准规定了碳酸铯的要求、试验方法、检验规则以及标志、包装、运输、贮存、质量证明书和合同（或订货单）内容。 本标准适用于采用合成法生产的碳酸铯。

Cesium carbonate

KS D 0005-2011 钛和钛合金取样方法

이 표준은 타이타늄 및 타이타늄 합금[스폰지 타이타늄, 잉곳(ingot), 가공재 및 주물

Sampling methods for titanium and titanium alloys

ASTM B265-11e1 钛及钛合金带材、薄板材及板材标准规格

1.1 This specification2 covers annealed titanium and titanium alloy strip, sheet, and plate as follows: 1.1.1 Grade 1???Unalloyed titanium, 1.1.2 Grade 2???Unalloyed titanium, 1.1.2.1 Grade 2H???Unalloyed titanium (Grade 2 with 58 ksi minimum UTS), 1.1.3 Grade 3???Unalloyed titanium, 1.1.4 Grade 4???Unalloyed titanium, 1.1.5 Grade 5???Titanium alloy (68201;% aluminum, 48201;% vanadium), 1.1.6 Grade 6???Titanium alloy (58201;% aluminum, 2.58201;% tin), 1.1.7 Grade 7???Unalloyed titanium plus 0.12 to 0.258201;% palladium, 1.1.7.1 Grade 7H???Unalloyed titanium plus 0.12 to 0.258201;% palladium (Grade 7 with 58 ksi minimum UTS), 1.1.8 Grade 9???Titanium alloy (3.08201;% aluminum, 2.58201;% vanadium), 1.1.9 Grade 11???Unalloyed titanium plus 0.12 to 0.258201;% palladium, 1.1.10 Grade 12???Titanium alloy (0.38201;% molybdenum, 0.88201;% nickel), 1.1.11 Grade 13???Titanium alloy (0.58201;% nickel, 0.058201;% ruthenium), 1.1.12 Grade 14???Titanium alloy (0.58201;% nickel, 0.058201;% ruthenium), 1.1.13 Grade 15???Titanium alloy (0.58201;% nickel, 0.058201;% ruthenium), 1.1.14 Grade 16???Unalloyed titanium plus 0.04 to 0.088201;% palladium, 1.1.14.1 Grade 16H???Unalloyed titanium plus 0.04 to 0.088201;% palladium (Grade 16 with 58 ksi minimum UTS), 1.1.15 Grade 17???Unalloyed titanium plus 0.04 to 0.088201;% palladium, 1.1.16 Grade 18???Titanium alloy (38201;% aluminum, 2.58201;% vanadium) plus 0.04 to 0.088201;% palladium, 1.1.17 Grade 19???Titanium alloy (38201;% aluminum, 88201;% vanadium, 68201;% chromium, 48201;% zirconium, 48201;% molybdenum), 1.1.18 Grade 20???Titanium alloy (38201;% aluminum, 88201;% vanadium, 68201;% chromium, 48201;% zirconium, 48201;% molybdenum) plus 0.048201;% to 0.088201;% palladium, 1.1.19 Grade 21???Titanium alloy (158201;% molybdenum, 38201;% aluminum, 2.78201;% niobium, 0.258201;% silicon), 1.1.20 ......

Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate

ASTM B600-11 钛及钛合金表面除垢和清洁的标准指南

1.1 This guide covers a cleaning and descaling procedure useful to producers, users, and fabricators of titanium and titanium alloys for the removal of ordinary shop soils, oxides, and scales resulting from heat treatment operations and foreign substances present as surface contaminants. 1.2 It is not intended that these procedures be mandatory for removal of any of the indicated soils but rather serve as a guide when titanium and titanium alloys are being processed in the wrought, cast, or fabricated form. 1.3 It is the intent that these soils be removed prior to chemical milling, joining, plating, fabrication, and in any situation where foreign substances interfere with the corrosion resistance, stability, and quality of the finished product. 1.4 Acid etching may be required following cleaning when the surface has an oxygen-contaminated layer or alpha case present. 1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.6 This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to consult and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Descaling and Cleaning Titanium and Titanium Alloy Surfaces

ASTM B265-11 钛及钛合金条板,薄板及中厚板标准规格

1.1 This specification covers annealed titanium and titanium alloy strip, sheet, and plate as follows: 1.1.1 Grade 18212;Unalloyed titanium, 1.1.2 Grade 28212;Unalloyed titanium, 1.1.2.1 Grade 2H8212;Unalloyed titanium (Grade 2 with 58 ksi minimum UTS), 1.1.3 Grade 38212;Unalloyed titanium, 1.1.4 Grade 48212;Unalloyed titanium, 1.1.5 Grade 58212;Titanium alloy (6 % aluminum, 4 % vanadium), 1.1.6 Grade 68212;Titanium alloy (5 % aluminum, 2.5 % tin), 1.1.7 Grade 78212;Unalloyed titanium plus 0.12 to 0.25 % palladium, 1.1.7.1 Grade 7H8212;Unalloyed titanium plus 0.12 to 0.25 % palladium (Grade 7 with 58 ksi minimum UTS), 1.1.8 Grade 98212;Titanium alloy (3.0 % aluminum, 2.5 % vanadium), 1.1.9 Grade 118212;Unalloyed titanium plus 0.12 to 0.25 % palladium, 1.1.10 Grade 128212;Titanium alloy (0.3 % molybdenum, 0.8 % nickel), 1.1.11 Grade 138212;Titanium alloy (0.5 % nickel, 0.05 % ruthenium), 1.1.12 Grade 148212;Titanium alloy (0.5 % nickel, 0.05 % ruthenium), 1.1.13 Grade 158212;Titanium alloy (0.5 % nickel, 0.05 % ruthenium), 1.1.14 Grade 168212;Unalloyed titanium plus 0.04 to 0.08 % palladium, 1.1.14.1 Grade 16H8212;Unalloyed titanium plus 0.04 to 0.08 % palladium (Grade 16 with 58 ksi minimum UTS), 1.1.15 Grade 178212;Unalloyed titanium plus 0.04 to 0.08 % palladium, 1.1.16 Grade 188212;Titanium alloy (3 % aluminum, 2.5 % vanadium) plus 0.04 to 0.08 % palladium, 1.1.17 Grade 198212;Titanium alloy (3 % aluminum, 8 % vanadium, 6 % chromium, 4 % zirconium, 4 % molybdenum), 1.1.18 Grade 208212;Titanium alloy (3 % aluminum, 8 % vanadium, 6 % chromium, 4 % zirconium, 4 % molybdenum) plus 0.04 % to 0.08 % palladium, 1.1.19 Grade 218212;Titanium alloy (15 % molybdenum, 3 % aluminum, 2.7 % niobium, 0.25 % silicon), 1.1.20

Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate

ASTM B977-11 钛及钛铸块标准规范

1.1 This specification covers titanium and titanium alloy ingots as follows: 1.1.1 Grade 18212;Unalloyed titanium, 1.1.2 Grade 28212;Unalloyed titanium, 1.1.3 Grade 38212;Unalloyed titanium, 1.1.4 Grade 48212;Unalloyed titanium, 1.1.5 Grade 58212;Titanium alloy (6 % aluminum, 4 % vanadium), 1.1.6 Grade 68212;Titanium alloy (5 % aluminum, 2.5 % tin), 1.1.7 Grade 78212;Unalloyed titanium plus 0.12 to 0.25 % palladium, 1.1.8 Grade 98212;Titanium alloy (3 % aluminum, 2.5 % vanadium), 1.1.9 Grade 118212;Unalloyed titanium plus 0.12 to 0.25 % palladium, 1.1.10 Grade 128212;Titanium alloy (0.3 % molybdenum, 0.8 % nickel), 1.1.11 Grade 138212;Titanium alloy (0.5 % nickel, 0.05 % ruthenium), 1.1.12 Grade 148212;Titanium alloy (0.5 % nickel, 0.05 % ruthenium), 1.1.13 Grade 158212;Titanium alloy (0.5 % nickel, 0.05 % ruthenium), 1.1.14 Grade 168212;Unalloyed titanium plus 0.04 to 0.08 % palladium, 1.1.15 Grade 178212;Unalloyed titanium plus 0.04 to 0.08 % palladium, 1.1.16 Grade 188212;Titanium alloy (3 % aluminum, 2.5 % vanadium) plus 0.04 to 0.08 % palladium, 1.1.17 Grade 198212;Titanium alloy (3 % aluminum, 8 % vanadium, 6 % chromium, 4 % zirconium, 4 % molybdenum), 1.1.18 Grade 208212;Titanium alloy (3 % aluminum, 8 % vanadium, 6 % chromium, 4 % zirconium, 4 % molybdenum) plus 0.04 to 0.08 % palladium, 1.1.19 Grade 218212;Titanium alloy (15 % molybdenum, 3 % aluminum, 2.7 % niobium, 0.25 % silicon), 1.1.20 Grade 238212;Titanium alloy (6 % aluminum, 4 % vanadium with extra low interstitials, ELI), 1.1.21 Grade 248212;Titanium alloy (6 % aluminum, 4 % vanadium) plus 0.4 to 0.8 % palladium, 1.1.22 Grade 258212;Titanium alloy (6 % aluminum, 4 % vanadium) plus 0.3 to 0.8 % nickel and 0.04 to 0.08 % palladium, 1.1.23 Grade 268212;Unalloyed titanium plus 0.08 to 0.14 % ruthenium, 1.1.24 Grade 278212;Unalloyed titanium plus 0.08 to 0.14 % ruthenium, 1.1.25 Grade 288212;Titanium alloy (3 % aluminum, 2.5 % vanadium) plus 0.08 to 0.14 % ruthenium, 1.1.26 Grade 298212;Titanium alloy......

Standard Specification for Titanium and Titanium Ingots

ASTM B348-11 钛及钛合金棒和坯锭的标准规范

1.1 This specification covers annealed titanium and titanium alloy bars and billets as follows: 1.1.1 Grade 18212;Unalloyed titanium, 1.1.2 Grade 28212;Unalloyed titanium, 1.1.2.1 Grade 2H8212;Unalloyed titanium (Grade 2 with 58 ksi minimum UTS), 1.1.3 Grade 38212;Unalloyed titanium, 1.1.4 Grade 48212;Unalloyed titanium, 1.1.5 Grade 58212;Titanium alloy (6 % aluminum, 4 % vanadium), 1.1.6 Grade 68212;Titanium alloy (5 % aluminum, 2.5 % tin), 1.1.7 Grade 78212;Unalloyed titanium plus 0.12 to 0.25 % palladium, 1.1.7.1 Grade 7H8212;Unalloyed titanium plus 0.12 to 0.25 % palladium (Grade 7 with 58 ksi minimum UTS), 1.1.8 Grade 98212;Titanium alloy (3 % aluminum, 2.5 % vanadium), 1.1.9 Grade 118212;Unalloyed titanium plus 0.12 to 0.25 % palladium, 1.1.10 Grade 128212;Titanium alloy (0.3 % molybdenum, 0.8 % nickel), 1.1.11 Grade 138212;Titanium alloy (0.5 % nickel, 0.05 % ruthenium), 1.1.12 Grade 148212;Titanium alloy (0.5 % nickel, 0.05 % ruthenium), 1.1.13 Grade 158212;Titanium alloy (0.5 % nickel, 0.05 % ruthenium), 1.1.14 Grade 168212;Unalloyed titanium plus 0.04 to 0.08 % palladium, 1.1.14.1 Grade 16H8212;Unalloyed titanium plus 0.04 to 0.08 % palladiumm (Grade 16 with 58 ksi minimum UTS), 1.1.15 Grade 178212;Unalloyed titanium plus 0.04 to 0.08 % palladium, 1.1.16 Grade 188212;Titanium alloy (3 % aluminum, 2.5 % vanadium) plus 0.04 to 0.08 % palladium, 1.1.17 Grade 198212;Titanium alloy (3 % aluminum, 8 % vanadium, 6 % chromium, 4 % zirconium, 4 % molybdenum), 1.1.18 Grade 208212;Titanium alloy (3 % aluminum, 8 % vanadium, 6 % chromium, 4 % zirconium, 4 % molybdenum) plus 0.04 %–0.08 % palladium, 1.1.19 Grade 218212;Titanium alloy (15 % molybdenum, 3 % aluminum, 2.7 % niobium, 0.25 % silicon), 1.1.20 Grade 238212;Titanium alloy (6 % aluminum, 4 % vanadium with extra low interstitial elements, ELI), 1.1.21

Standard Specification for Titanium and Titanium Alloy Bars and Billets

YS/T 744-2010 电池级无水氯化锂

本标准规定了电池级无水氯化锂的要求、试验方法、检验规则和标志、包装、运输、贮存、质量证明书及订货单(或合同)内容。 本标准适用于以各种原料制得的无水氯化锂,产品主要用于一步电解制取电池级金属锂,也可用于制造焊接材料、空调和作为高分子材料合成催化剂等。

Battery grade anhydrous lithium chloride

YS/T 299-2010 人造金红石

本标准规定了人造金红石的要求、试验方法、检验规则及标志、包装、运输、贮存、质量证明书和合同(或订货单)内容。 本标准适用于以钛铁矿做原料,采用预氧化,弱还原酸浸或强还原锈蚀等方法生产的人造金红石产品,以及生产精四氯化钛和供做电焊条涂料用的人造金红石产品。其他方法生产的人造金红石可参照执行。

Artificial rutile

KS D 0079-2010 钛焊接管压差测试方法

이 표준은 타이타늄 용접관(이하 용접관이라 한다.)의 기밀성을 확인하기 위한 차압 시험(이

Differential pressure testing method of titanium welded tubes