H72 粉末冶金材料与制品 标准查询与下载

JIS Z 2550:2000 烧结金属材料.规范

この規格は，軸受と機械部品に使用される焼結金属材料の化学成分，機械的特性及び物理的特性について規定する。

Sintered metal materials -- Specification

ASTM B848-00 粉末锻造(P/F)的铁构件标准规范

1.1 This specification covers powder forged ferrous materials fabricated by hot densification of atomized prealloyed or iron powders and intended for use as structural parts. 1.2 This specification covers powder forged parts made from the following materials: 1.2.1 Compositions1.2.1.1 P/F-10XX Carbon Steel (produced from atomized iron powder and graphite powder), 1.2.1.2 P/F-10CXX Copper-Carbon Steel (produced from atomized iron powder, copper and graphite powders), 1.2.1.3 P/F-11XX Carbon Steel with manganese sulfide for enhanced machinability (produced from atomized iron powder, manganese sulfide, and graphite powders), 1.2.1.4 P/F-11CXX Copper-Carbon Steel with manganese sulfide for enhanced machinability (produced from atomized iron powder, copper, manganese sulfide, and graphite powders), 1.2.1.5 P/F-42XX Nickel-Molybdenum Steel (produced from prealloyed atomized iron-nickel-molybdenum powder and graphite powder), 1.2.1.6 P/F-46XX Nickel-Molybdenum Steel (produced from prealloyed atomized iron-nickel-molybdenum powder and graphite powder), 1.2.1.7 P/F-44XX Molybdenum Steel (produced from prealloyed atomized iron-molybdenum powder and graphite powder), and 1.2.1.8 P/F-49XX Molybdenum Steel (produced from prealloyed atomized iron-molybdenum powder and graphite powder). Note 18212;Alloy composition designations are modifications of the AISI-SAE nomenclature. For example: 10CXX designates a plain carbon steel containing copper and XX amount of carbon. Compositional limits of alloy and impurity elements may be different from the AISI-SAE limits. Chemical composition limits are specified in Section 6. Note 28212;XX designates the forged carbon content, in hundredths of a percent, that is specified by the purchaser for the application. For a given specified carbon content, the permissible limits shall be as specified in 6.2. 1.2.2 Grades 1.2.2.1 Grade A8212;Density equivalent to a maximum of 0.5 % porosity. The minimum density of those sections of the powder forged part so designated by the applicable part drawing shall not be less than the value specified in Table 1. 1.2.2.2Grade B 8212;Density equivalent to a maximum of 1.5 % porosity. The minimum density of those sections of the powder forged part so designated by the applicable part drawing shall not be less than the value specified in . 1.3 Property values stated in inch-pound units are the standard. Conversion factors to SI units may be approximate.

Standard Specification for Powder Forged (P/F) Ferrous Structural Parts

ASTM B23-00(2010) 白色金属轴承合金(商品名称为“巴氏合金”) 的标准规范

1.1 This specification covers eight typical white metal bearing alloys, in bar or ingot form, known commercially as “babbitt metal.” The alloys are specified, covering the range commercially used, and are designated by the alloy numbers shown in Table 1. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

Standard Specification for White Metal Bearing Alloys (Known Commercially as "Babbitt Metal")

JB/T 53334-1999 粉末治金汽车减震器零件产品质量分等（内部使用）

Product quality classification of powder metallurgy automobile shock absorber parts (for internal use)

JB/T 53327-1999 中型载重汽车铁基粉末治金制动磨擦片产品质量分等（内部使用）

Product quality classification of iron-based powder metallurgy brake friction pads for medium-sized trucks (for internal use)

JB/T 53328-1999 装载机铜基湿式粉末治金磨擦片产品质量分等（内部使用）

Product quality grading of copper-based wet powder metallurgy friction discs for loaders (for internal use)

JB/T 53329-1999 锻压机床离合器铜基干式磨擦片产品质量分等（内部使用）

Quality grading of copper-based dry friction discs for forging machine tool clutches (for internal use)

JB/T 50052-1999 雾化6-6-3锡青铜粉产品质量分等

Product quality classification of atomized 6-6-3 tin bronze powder

JB/T 53344-1999 船用齿轮箱铜基湿式粉末治金磨擦片产品质量分等（内部使用）

Product quality grading of copper-based wet powder metallurgy friction discs for marine gearboxes (for internal use)

JB/T 58800-1999 飞机刹车用烧结金属摩擦车和对偶片产品质量分等

Quality grading of sintered metal friction pads and counter discs for aircraft brakes

JB/T 53338-1999 粉末治金机油泵齿轮产品质量分等（内部使用）

Quality grading of powder metallurgy oil pump gear products (for internal use)

JB/T 53331-1999 粉末治金6-6-3铜基含油轴承产品质量分等（内部使用）

Powder metallurgy 6-6-3 Copper base oil bearing product quality grading (for internal use)

JB/T 53332-1999 金属基镶嵌型固体自润滑轴承（衬）产品质量分等（内部使用）

Metal-based embedded solid self-lubricating bearings (lining) product quality classification (internal use)

JB/T 53342-1999 电力机车受电弓用粉末治金滑板产品质量分等（内部使用）

Product quality classification of powder metallurgy slide plate for electric locomotive pantograph (for internal use)

JB/T 53343-1999 烧结锡青铜过滤元件产品质量分等（内部使用）

Sintered tin bronze filter element product quality classification (for internal use)

JB/T 53333-1999 粉末热锻浮动油封密封环产品质量分等（内部使用）

Product quality grading of powder hot forging floating oil seal and sealing ring (for internal use)

JB/T 53336-1999 粉末治金（铁基）气门导管产品质量分等（内部使用）

Powder metallurgy (iron-based) valve guide product quality classification (internal use)

JB/T 53330-1999 粉末治金铁基含油轴承产品质量分等（内部使用）

Quality classification of powder metallurgy iron-based oil-impregnated bearings (for internal use)

JB/T 53341-1999 粉末治金用还原铁粉产品质量分等（内部使用）

Product quality classification of reduced iron powder for powder metallurgy (internal use)

ISO 2740:1999 烧结金属材料,不包括硬质金属 拉伸试验试样

This International Standard is applicable to all sintered metals and alloys, excluding hardmetals. This International Standard specifies: — the die cavity dimensions used for making tensile test pieces by pressing and sintering, and by Metal Injection Moulding (MIM) and sintering; — the dimensions of tensile test pieces machined from sintered and powder forged materials.

Sintered metal materials, excluding hardmetals - Tensile test pieces