J05 结构要素 标准查询与下载

ISO 4755:1983 紧固件 ISO米制外螺纹用螺纹退刀槽

Lays down the form and dimensions of undercuts for bolts, screws and similar externally threaded products, recommended for use in those cases where it is needed for components such as plugs.

Fasteners; Thread undercuts for external metric ISO threads

AIA/NAS NAS 76-1983 Rev. 8铜或青铜压配合普通套管

This non4overnment docwnent rn adopted on 30 January 1984 and ia approved for use by DoDe The indicated indwtry group has furnished the clearance required %y existing re@ations, Copies of the domment are stocked by the DoD Single Stock Point, Naval. ptrhl icatiorm and Forms Canter, PhSl.adelphia, PA 191 20, for issue to DoD activities only. Contractom and industry groups mat obtain copies directly from National 8tc?ndards AssociRtion, Ince y 5161 River Road, Rethesda, MD m16.

Bushing-Plain, Press Fit, Copper& Bronze Rev. 8

ANSI/ASME B1.2-1983 统一螺纹的量规和测量

This Standard provides essentials specifications and dimensions for the gages used on Unified inch screw threads (UN and UNR thread form)and covers the specifications and dimensions for the thread gages and measuring equipment listed in Tables 1 and 2. The basic purpose and use of each gage are also described.

Gages and Gaging for Unified Screw Threads

ANSI/ASME B1.20.1-1983 通用的管螺纹(英制)

Covers dimensions and gaging of pipe threads for general purpose applications.

Pipe Threads, General Purpose (Inch)

AIA/NAS NA 0156-1982 设计参数公制阳螺纹钮扣

This nongovernment docurruint was adopted on 22 May 1986 and is approved for use by DoD. The indicated industry group has furnished the clearance required by existing regulations. by DOD Single SWk Point, Naval Publications and Forms Center, Philadelphia, PA 19120, for issue to DoD a c t i v i t i e s only. Contractors. and industry groups must obtain copies directly from National Standards Association, Inc., 5161 River Fbad, Bethesda, MD 20816.

Male Threaded Fasteners, Metric Design Parameters for

HB 3296-1979 随机工具技术条件

random tool specification

HB 3292-1979 注油枪

Grease gun

HB 3291-1979 油枪

oil gun

AIA/NAS NAS 1655-1981 (Rev. 1)1981年12月取代外壳尺寸12接线盒嵌入物排列 [代替: DLA MIL-STD-1669 VALID NOTICE 1, DLA MIL-STD-1669 VALID NOTICE 1, DLA MIL-STD-1669, DLA MIL-STD-1669]

Insert Arrangement, Electrical Connector, Shell Size 12 Superseded - December 1981 (Rev. 1) [Use: DLA MIL-STD-1669 VALID NOTICE 1, DLA MIL-STD-1669 VALID NOTICE 1, DLA MIL-STD-1669, DLA MIL-STD-1669]

Insert Arrangement, Electrical Connector, Shell Size 12 Superseded - December 1981 (Rev. 1) [Use: DLA MIL-STD-1669 A, DLA MIL-STD-1669 A, DLA MIL-STD-1669 VALID NOTICE 1, DLA MIL-STD-1669 VALID NOTICE 1, DLA MIL-STD-1669, DLA MIL-STD-1669]

AIA/NAS NAS 1647-1981 (Rev. 1)1981年12月取代外壳尺寸16接线盒嵌入物排列 [代替: DLA MIL-STD-1554 VALID NOTICE 2, DLA MIL-STD-1554 VALID NOTICE 2, DLA MIL-STD-1554 NOTICE 4, DLA MIL-STD-1554 NOTICE 4, DLA MIL-STD-1554 VALID NOTICE 1]

Insert Arrangements Electrical Connector, Shell Size 16 Superseded - December 1981 (Rev. 1) [Use: DLA MIL-STD-1554 VALID NOTICE 2, DLA MIL-STD-1554 VALID NOTICE 2, DLA MIL-STD-1554 NOTICE 4, DLA MIL-STD-1554 NOTICE 4, DLA MIL-STD-1554 VALID NOTICE 1

Insert Arrangements Electrical Connector, Shell Size 16 Superseded - December 1981 (Rev. 1) [Use: DLA MIL-STD-1554 A, DLA MIL-STD-1554 A, DLA MIL-STD-1554 VALID NOTICE 2, DLA MIL-STD-1554 VALID NOTICE 2, DLA MIL-STD-1554 NOTICE 4, DLA MIL-STD-1554 NOT

AIA/NAS NAS 1649-1981 (Rev. 1)1981年12月取代外壳尺寸22接线盒嵌入物排列 [代替: DLA MIL-STD-1554 VALID NOTICE 2, DLA MIL-STD-1554 NOTICE 4, DLA MIL-STD-1554 VALID NOTICE 1, DLA MIL-STD-1554 NOTICE 3, DLA MIL-STD-1554 NOTICE 2, DLA MIL-STD-1554 NOTICE 1, DLA]

NATIONAL AEROSPACE STANDARDS COMMITTEE

Insert Arrangements Electrical Connector, Shell Size 22 (Rev. 1) [Use: DLA MIL-STD-1554 A, DLA MIL-STD-1554 VALID NOTICE 2, DLA MIL-STD-1554 NOTICE 4, DLA MIL-STD-1554 VALID NOTICE 1, DLA MIL-STD-1554 NOTICE 3, DLA MIL-STD-1554 NOTICE 2, DLA MIL-STD-15

AIA/NAS NAS 1661-1981 (Rev. 1)外壳尺寸24接线盒嵌入物排列

Insert Arrangement, Electrical Connector, Shell Size 24 (Rev. 1)

Insert Arrangement, Electrical Connector, Shell Size 24 (Rev. 1)

AIA/NAS NAS 1668-1981 (Rev. 1)1981年12月取代接线盒封口索环插销 [代替: DLA MS3187 REV F, DLA MS3187 REV F, DLA MS3187 REV E NOTICE 1, DLA MS3187 REV E NOTICE 1, DLA MS3187 REV E, DLA MS3187 REV E, DLA MS3187 REV D, DLA MS3187 REV D, DLA]

Plug, Grommet Sealing, Electrical Connector Superseded - December 1981 (Rev. 1) [Use: DLA MS3187 REV F, DLA MS3187 REV F, DLA MS3187 REV E NOTICE 1, DLA MS3187 REV E NOTICE 1, DLA MS3187 REV E, DLA MS3187 REV E, DLA MS3187 REV D, DLA MS3187 REV D, DLA

Plug, Grommet Sealing, Electrical Connector Superseded - December 1981 (Rev. 1) [Use: DLA MS3187 REV F, DLA MS3187 REV F, DLA MS3187 REV E NOTICE 1, DLA MS3187 REV E NOTICE 1, DLA MS3187 REV E, DLA MS3187 REV E, DLA MS3187 REV D, DLA MS3187 REV D, DLA

AIA/NAS NAS 1685-1981 (Rev. 2)外壳尺寸8接线盒嵌入物排列

Insert Arrangement, Electrical Connector, Shell Size 8 (Rev. 2)

Insert Arrangement, Electrical Connector, Shell Size 8 (Rev. 2)

AIA/NAS NAS 1644-1981 (Rev. 1)1981年12月取代外壳尺寸10接线盒嵌入物排列 [代替: DLA MIL-STD-1554 VALID NOTICE 2, DLA MIL-STD-1554 VALID NOTICE 2, DLA MIL-STD-1554 NOTICE 4, DLA MIL-STD-1554 NOTICE 4, DLA MIL-STD-1554 VALID NOTICE 1]

Insert Arrangements Electrical Connector, Shell Size 10 Superseded - December 1981 (Rev. 1) [Use: DLA MIL-STD-1554 VALID NOTICE 2, DLA MIL-STD-1554 VALID NOTICE 2, DLA MIL-STD-1554 NOTICE 4, DLA MIL-STD-1554 NOTICE 4, DLA MIL-STD-1554 VALID NOTICE 1

Insert Arrangements Electrical Connector, Shell Size 10 Superseded - December 1981 (Rev. 1) [Use: DLA MIL-STD-1554 A, DLA MIL-STD-1554 A, DLA MIL-STD-1554 VALID NOTICE 2, DLA MIL-STD-1554 VALID NOTICE 2, DLA MIL-STD-1554 NOTICE 4, DLA MIL-STD-1554 NOT

AIA/NAS NAS 1567-1981 (Rev. 2)抗风化铝合金铸件接线盒集合

Junction Box Assembly Cast Al Aly, Weatherproof (Rev. 2)

Junction Box Assembly Cast Al Aly, Weatherproof (Rev. 2)

AIA/NAS NAS 1570-1981 (Rev. 2)接线盒垫圈

Gasket - Junction Box (Rev. 2)

Gasket - Junction Box (Rev. 2)

AIA/NAS NAS 1659-1981 (Rev. 3)外壳尺寸20接线盒嵌入物排列

CONTACT IDENTIFICATION LETTERS ON REAR GROMMET FACE OF SOCKET AND P I N INSERT SHALL BE WITHIN 45' EITHER SIDE OF VERTLCAL CENTERLINE ABOVE THE CONTACT CAVITY. IDENTIFICkTlON OF CONTACT CAVITIES A AND W IS OPTIONAL FOR THE -39 INSERT ARRANGEMENT

Insert Arrangement, Electrical Connector, Shell Size 20 (Rev. 3)

AIA/NAS NAS 1658-1981 (Rev. 1)1981年12月取代外壳尺寸18接线盒嵌入物排列 [代替: DLA MIL-STD-1669 VALID NOTICE 1, DLA MIL-STD-1669 VALID NOTICE 1, DLA MIL-STD-1669, DLA MIL-STD-1669]

Insert Arrangement, Electrical Connector, Shell Size 18 Superseded - December 1981 (Rev. 1) [Use: DLA MIL-STD-1669 VALID NOTICE 1, DLA MIL-STD-1669 VALID NOTICE 1, DLA MIL-STD-1669, DLA MIL-STD-1669]

Insert Arrangement, Electrical Connector, Shell Size 18 Superseded - December 1981 (Rev. 1) [Use: DLA MIL-STD-1669 A, DLA MIL-STD-1669 A, DLA MIL-STD-1669 VALID NOTICE 1, DLA MIL-STD-1669 VALID NOTICE 1, DLA MIL-STD-1669, DLA MIL-STD-1669]

AIA/NAS NAS 1657-1981 (Rev. 1)1981年12月取代外壳尺寸16接线盒嵌入物排列 [代替: DLA MIL-STD-1669 VALID NOTICE 1, DLA MIL-STD-1669 VALID NOTICE 1, DLA MIL-STD-1669, DLA MIL-STD-1669]

AL. ALLOY DIE CASTING ALCOA*13 ( A M Y 57-93.8 GR.2) MAY BE PURCHASED FROM WARVIìì A\RCRAFT DIE CASTING CORP. OR EQUM

Insert Arrangement, Electrical Connector, Shell Size 16 Superseded - December 1981 (Rev. 1) [Use: DLA MIL-STD-1669 A, DLA MIL-STD-1669 A, DLA MIL-STD-1669 VALID NOTICE 1, DLA MIL-STD-1669 VALID NOTICE 1, DLA MIL-STD-1669, DLA MIL-STD-1669]