J09 卫生、安全、劳动保护 标准查询与下载

EN 10217-7:2014 压力用途焊接钢管.交货技术条件.第7部分:不锈钢管

This Part of EN 10217 specifies the technical delivery conditions in two test categories for welded tubes of circular cross-section made of austenitic and austenitic-ferritic stainless steel which are intended for pressure and corrosion resisting purposes at room temperature, at low temperatures or at elevated temperatures. NOTE Once this standard is published in the Official Journal of the European Union (OJEU) under Directive 97/23/EC, pressure equipment directive, presumption of conformity to the Essential Safety Requirements (ESR) of Directive 97/23/EC is limited to technical data of materials in this standard and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of the Pressure Equipment Directive are satisfied, needs to be done by the designer or manufacturer of the pressure equipment, taking also into account the subsequent manufacturing processes which may affect properties of the base materials.

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes

BS EN 61496-2:2013 机械安全性.电敏防护设备.使用有源光电子保护器件设备(AOPDs)的详细要求

Safety of machinery. Electro-sensitive protective equipment. Particular requirements for equipment using active opto-electronic protective devices (AOPDs)

GOST EN 953-2014 机械安全. 保护装置. 固定和可移动保护装置的设计和制造的通用要求

Safety of machinery. Guards. General requirements for the design and construction of fixed and movable guard

GOST ISO 13849-1-2014 机械安全. 控制系统的安全相关性部件. 第1部分. 通用设计原则

Safety of machinery. Safety-related parts of control systems. Part 1. General principles for design

BS EN ISO 14119:2013 机械安全性.带有联锁装置的保护装置.设计和选择原则

Safety of machinery. Interlocking devices associated with guards. Principles for design and selection

DIN EN 60204-33:2011 电力机械设备的安全.第33部分:对半导体制造设备的要求(IEC 60204-33-2009,修改版);德文版本EN 60204-33-2011

Safety of machinery - Electrical equipment of machines - Part 33: Requirements for semiconductor fabrication equipment (IEC 60204-33:2009, modified); German version EN 60204-33:2011

BS EN ISO 12100:2010 机械安全性.设计通则.风险评估和风险降低

Safety of machinery. General principles for design. Risk assessment and risk reduction

DIN EN 60204-11 Berichtigung 1:2010 机械安全性.机械电气设备.第11部分:大于1000V a.c.或1500V.d.c不超过36KV的高压设备要求 (IEC 60204-11-2000); 德文版本 EN 60204-11:-2000, DIN EN 60204-11 (VDE 0113-11):2001-05 技术勘误; 德文版本 CENELEC-Cor.-2010 to EN 60204-11-2000

Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equipment for voltages above 1000 V a.c. or 1500 V d.c. and not exceeding 36 kV (IEC 60204-11:2000); German version EN 60204-11:2000, Corrigendum to DIN EN 60204-11 (VDE

DIN EN 60204-1 Berichtigung 1:2010 机械安全性.机械的电气设备.第1部分:一般要求.技术勘误DIN EN 60204-1 (VDE 0113-1)-2007

Safety of machinery - Electrical equipment of machines - Part 1: General requirements (IEC 60204-1:2005, modified); German version EN 60204-1:2006, Corrigendum to DIN EN 60204-1 (VDE 0113-1):2007-06; German version CENELEC-Cor. :2010 to EN 60204-1:2006

EN 14681:2006+A1:2010 机械安全.电弧炉炼钢用机械和设备的安全要求

This European Standard specifies the general safety requirements for electric arc furnaces (EAF) to melt steel not containing radioactive material. This European Standard deals with all significant hazards, hazardous situations and events pertinent to EAF, when used as intended and under conditions foreseen by the manufacturer, but also includes foreseeable faults and malfunctions in case of misuse. This European Standard specifies also criteria for the plant and equipment integrated in the production process. This European Standard specifies the requirements to ensure the safety of persons which are to be met during the design, assembly, transport, commissioning, operation, maintenance and decommissioning of the equipment. This European Standard assumes that installations are operated and maintained by adequately trained and competent personnel. Manual intervention for setting, adjustment and maintenance is accepted as part of the normal use of the equipment. This European Standard covers the following equipment (see Annex B): EAF with AC technology (alternating current); EAF with DC technology (direct current); scrap pre-heating technology; associated equipment/devices according Annex B. The following equipment is not covered by this European Standard: induction furnace; resistance-arc furnace; electron beam furnace; plasma furnace; other electrical furnaces used in secondary steelmaking. This European Standard does not specify safety requirements for the following equipment, which can be an integral or complementary part of the equipment covered by the Scope: a) cranes; b) scrap basket; c) transport car for scrap basket; d) elephant house (furnace encasing for environmental reasons); e) separate scrap drying equipment.

Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces

EN 14656:2006+A1:2010 机械安全.钢铁和有色金属挤压机的安全要求

This European Standard applies to: extrusion presses from the exit side of the heater through associated handling, cooling and quenching equipment including, e. g. the puller, the hot saw, the run-out table, the stretcher, the cold saw, cold saw table and/or coiler when incorporated into the equipment, to a point where the extruded product is passed to associated finishing equipment. It specifies the health and safety requirements at all stages in the life of the equipment, its design, ordering, construction, use and disposal. This European Standard specifies requirements to be met by the manufacturer to ensure the health and safety of persons during construction, transport, commissioning, operation, maintenance and de-commissioning, as well as in the event of foreseeable faults as malfunctions which may occur in the equipment. This European Standard deals with all significant hazards, hazardous situations and events relevant to extrusion presses when they are used as intended and under conditions which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard is not applicable to extrusion presses which are manufactured before the date of its publication as EN.

Safety of machinery - Safety requirements for extrusion presses for steel and non-ferrous metals

EN 14673:2006+A1:2010 机械安全.锻造钢和有色金属的液压驱动开式热模锻压力机的安全要求

This European Standard applies to: hydraulically powered open die forging presses for hot working; handling and cooling equipment connected with the control system of the forging line, e. g., manipulators, rotating type handling devices, die shifting devices, table devices and tool changing devices; handling equipment designed specifically to be used within the forging line, e. g., material manipulation devices, turnover or handling devices attached to fork lift trucks or cranes etc. It specifies the health and safety requirements at all stages in the life of the equipment, its design, ordering, construction, use and disposal. This European Standard specifies requirements to be met by the manufacturer to ensure the health and safety of persons during construction, transport, commissioning, operation, maintenance and de-commissioning, as well as in the event of foreseeable faults as malfunctions which may occur in the equipment. This European Standard deals with all significant hazards, hazardous situations and events relevant to hydraulically powered open die hot forging presses when they are used as intended and under conditions foreseeable by the manufacturer (see Clause 4). This European Standard does not cover: hydraulically controlled closed die forging presses for hot working; mechanically powered hot forging presses; mobile manipulators as defined in 3.4.2; standard transport and lifting equipment modified for use with material manipulation devices, turnover and handling devices such as for fork lift trucks and cranes. This European Standard is not applicable to machinery which was manufactured before the date of publication of this standard by CEN.

Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals

EN 1034-1:2000+A1:2010 机械安全.造纸机和精整机设计和施工的安全要求.第1部分:共同要求

This standard applies to paper making and paper finishing machines. It contains definitions and requirements which apply to all paper making and paper finishing machines listed in annex A and shall be used in connection with the specific part applicable for the respective machine listed in annex A. Specific parts can contain additional requirements or deviations from EN 1034-1 in which case the specific stipulations take precedence over the specification made in EN 1034-1. The standard deals with the hazards listed in 4. This standard does not apply to machines used in paper converting. See EN 1010-1 to EN 1010-5. This standard applies to machines produced after............. (date of CEN approval).

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements

BIP 2184-2010 机械和工作设备的危险管理

Risk Management of Machinery and Work Equipment

ANSI B11.19-2010 机械.安全防护性能标准

This standard provides performance requirements for the design, construction, installation, operation and maintenance of guards, safeguarding devices, awareness devices, safeguarding methods, as well as for complementary equipment and measures, safe work procedures and safety functions. This standard also covers the safeguarding requirements for mechanical power transmission apparatus. This standard does not provide the requirements for the selection of the safeguarding for a particular application.

Machines -Performance Criteria for Safeguarding

ANSI B11.0-2010 机械设备安全性.一般要求和风险评估

This standard applies to new, modified or rebuilt power driven machines, not portable by hand, used to shape and/or form metal or other materials by cutting, impact, pressure, electrical or other processing techniques, or a combination of these processes. This can be a single machine or a machinery system(s). Other industry sectors may benefit from applying this standard. Where a machine-specific standard exists and the requirements of that standard conflict with the requirements in this standard, the requirements of the machine-specific standard shall generally apply. Deviations from the requirements of this standard or from any machine-specific standard shall be based on a documented risk assessment..

Safety of Machinery - General Requirements and Risk Assessment

DIN EN 1760-3:2009 机械安全性.压敏保护装置.第3部分:压敏减震器,压敏板,压敏线和类似设备的设计和试验的通则(包括修改件A1-2009).英文版本DIN EN 1760-3-2009-09

This document deals with requirements for pressure sensitive protective devices which are not specified in EN 1760-1 and EN 1760-2. The majority of these devices are produced for specific applications and are not available as off-the-shelf items. The purpose of this document relates primarily to safety and reliability rather than suitability. For the relationship between safety and reliability, see EN 954-1:1996, Annex D. This document specifies requirements for pressure sensitive protective devices with and without an external reset facility. This document does not specify the dimensions of pressure sensitive protective devices in relation to any particular application. Specific requirements for particular applications may be set out in relevant type C standards. The document does not cover stopping devices used only for the regular operation, including emergency stopping, of machinery. It also does not apply to use in locations accessible to elderly or disabled persons or children, where special additional requirements may be necessary. Basic requirements are given for pressure sensitive protective devices not covered in EN 1760-1 and EN 1760-2. Specific requirements are given for the following devices: -- pressure sensitive bumpers; -- pressure sensitive plates; -- pressure sensitive wires (trip wires). NOTE Some requirements are made with respect to electromagnetic compatibility (EMC). These are intended to meet the requirements of the Council Directive 98/37/EC ("Machinery Directive") only and not those of Council Directive 89/336/EC ("EMC Directive") .

Safety of machinery - Pressure sensitive protective devices - Part 3: General principles for the design and testing of pressure sensitive bumpers, plates, wires and similar devices (includes Amendment A1:2009); English version of DIN EN 1760-3:2009-09

EN 1837:1999+A1:2009 机械的安全性.机器的整体照明

This standard specifies the parameters of integral lighting systems designed to provide illumination in and/or at both stationary and mobile machines to enable the safe use of the machine and the efficient performance of the visual task within and/or at the machine to be carried out. This standard does not specify lighting systems mounted on the machine to specifically illuminate visual tasks outside the machine. The function and requirements of these systems are specified in the European Standard dealing with the lighting of work places. This European Standard is under preparation. This standard does not establish additional requirements for the operation of lighting systems in severe conditions (extreme environmental conditions such as freezer applications, high temperatures, etc.); subject to special rules (e. g. explosive atmospheres); where the transmittance is reduced by environmental conditions, such as smoke, splashing, etc.

Safety of machinery - Integral lighting of machines

NF E09-060:2009 机械设备安全.护罩.固定式和活动式护照的设计和构造的一般要求

Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards.

JIS B 9706-1:2009 机械安全性.指示、标记和传动.第1部分:视觉、听觉和触觉信号的要求

This Standard specifies requirements for visual, acoustic and tactile methods of indicating safety-related information, at the human-machine interface and to exposed persons.

Safety of machinery -- Indication, marking and actuation -- Part 1: Requirements for visual, acoustic and tactile signals