J16 阀门 标准查询与下载

JB/T 14313-2022 核电厂用稳压器比例喷雾阀 技术规范

Technical Specifications for Pressure Regulator Proportional Spray Valves for Nuclear Power Plants

ASME B16.10-2022 阀门的面对面和端到端尺寸

This Standard covers face-to-face and end-to-end dimensions of straightway valves, and center-to-face and center-to-end dimensions of angle valves. Its purpose is to ensure installation interchangeability for valves ofa givenmaterial, type, size, rating class, and end connection. Face-to- face and center-to-face dimensions apply to flanged end valves with facings defined in para. 2.3.1 and to other valves intended for assembly between flat face or raised face flanges. Endto-end dimensions apply to grooved end, buttwelding end, and flanged end valves with facings defined in para. 2.3.3. Center-to-end dimensions apply to buttwelding end and to flanged end valves with facings defined in para. 2.3.3. 本标准涵盖直通阀的面对面和端到端尺寸，以及角阀的中心到面和中心到端尺寸。其目的是确保给定材料、类型、尺寸、额定等级和端接的阀门的安装互换性。面对面和中心对面尺寸适用于具有第2.3.1款中定义的面层的法兰端阀，以及用于在平面或凸面法兰之间组装的其他阀门。端对端尺寸适用于带槽端、对焊端和法兰端阀，其面层见第 2.3.3 段。中心到端尺寸适用于对接焊接端和法兰端阀，其面层见第2.3.3段。

Face-to-Face and End-to-End Dimensions of Valves

BS EN ISO 14245:2021 气瓶 液化石油气钢瓶阀门的规格和测试 自动关闭

Gas cylinders. Specifications and testing of LPG cylinder valves. Self-closing

ISO 5752:2021 法兰连接的管道系统用金属法兰. 结构长度和端面至中心的尺寸

This document specifies the basic series of face-to-face (FTF) and centre-to-face (CTF) dimensions for two-way metal valves of the gate, globe, diaphragm, ball, plug, butterfly design types used as isolating and check valves in flanged pipe systems. Each basic series of face-to-face and centre-to-face dimensions can be used as required with flanges of mating dimensions conforming to the equivalent EN or ASME flange series. This document covers valves with the following PN, Class, DN and NPS values: — PN 2,5; PN 6; PN 10; PN 16; PN 25; PN 40; PN 63; PN 100; PN 160; PN 250; PN 320; PN 400; — Class 125; Class 150; Class 250; Class 300; Class 600; Class 900; Class 1500; Class 2500; — DN 10; DN 15; DN 20; DN 25; DN 32; DN 40; DN 50; DN 65; DN 80; DN 100; DN 125; DN 150; DN 200; DN 250; DN 300; DN 350; DN 400; DN 450; DN 500; DN 600; DN 650; DN 700; DN 750; DN 800; DN 900; DN 1000; DN 1050; DN 1200; DN 1400; DN 1600; DN 1800; DN 2000; — corresponding to nominal sizes NPS: ⅜; ½; ¾; 1; 1 ¼; 1 ½; 2; 2 ½; 3; 4; 5; 6; 8; 10; 12; 14; 16; 18; 20; 24; 26; 28; 30; 32; 36; 40; 42; 48; 56; 64; 72; 80. NOTE See Annex B for the relationship between DN and NPS.

Metal valves for use in flanged pipe systems - Face-to-face and centre-to-face dimensions

NF D36-402*NF EN 1488:2021 建筑物用阀门. 膨胀阀组. 试验和要求

Building valves - Expansion groups - Tests and requirements

ISO 10631:2021 工业阀门. 金属蝶阀

This document specifies the general requirements for design, materials (e.g. steel, cast iron, ductile iron, copper alloy), pressure/temperature ratings and testing for butterfly valves having metallic bodies for use in flanged or butt-welding piping systems. This document applies to metallic butterfly valves used for all industrial applications. Additional requirements given in the relevant application standards can apply to butterfly valves used for more specific applications (e.g. for the water industry, the chemical and petrochemical process industry, the oil and gas industry). This document covers butterfly valves of the following nominal sizes, DN and NPS: — DN 40; 50; 65; 80; 100; 125; 150; 200; 250; 300; 350; 400; 450; 500; (550); 600; (650); 700; 750; 800; 900; 1000; 1050; 1200; 1400; 1500; 1600; 1800; 2000; 2200; 2400. — NPS 1 ½; 2; 2 ½; 3; 4; 5; 6; 8; 10; 12; 14; 16; 18; 20; (22); 24; (26); 28; 30; 32; 36; 40; 42; 48; 54; 56; 60; 64; 66; 72; 78; 80; 84; 88; 90; 96. This document is applicable to butterfly valves of the following pressure designations, PN and Class: — PN 2,5; PN 6; PN 10; PN 16; PN 25; PN 40; PN 63; PN 100; — Class 25, 125; 150; 250; 300; 600. NOTE 1 It is possible that the nominal sizes listed are not available for all pressure designations. NOTE 2 Nominal sizes listed in parenthesis are not common industry sizes, but are used in some application standards.

Industrial valves - Metallic butterfly valves

API STD 6DSSX-2021 海底管道阀门的操纵器和安装套件（第一版；ERTA 1:2021年5月）

Operator and Mounting Kits for Subsea Pipeline Valves (FIRST EDITION; ERTA 1: May 2021)

DIN EN ISO 4126-3:2021 过压保护安全设备. 第3部分: 组合中防爆板安全设备和安全阀(ISO 4126-3-2020); 德文版本EN ISO 4126-3-2020

This document specifies the requirements for the in-series combination of safety devices covered by EN ISO 4126-1, 4 and 5 and the bursting disc safety devices covered by EN ISO 4126-2 when the bursting disc safety device is fitted within no more than five pipe diameters from the

Safety devices for protection against excessive pressure - Part 3: Safety valves and bursting disc safety devices in combination (ISO 4126-3:2020); German version EN ISO 4126-3:2020

BS ISO 6002:2021 工业阀门. 用螺栓连接阀盖的钢制闸阀

Industrial valves. Bolted bonnet steel gate valves

ISO 6002:2021 工业阀门. 用螺栓连接阀盖的钢制闸阀

This document specifies the requirements for bolted bonnet steel gate vales having the following features: — bolted bonnet; — outside screw and yoke; — inside screw (alternative for PN 10, PN 16, Class 150, PN 25 and PN 40 only); — single or double obturator; — wedge or parallel seating; — with or without non-metallic obturator or seat seals; — flanged or butt-welding ends. It covers valves of the nominal sizes DN: — 10; 15; 20; 25; 32; 40; 50; 65; 80; 100; 125; 150; 200; 250; 300; 350; 400; 450; 500; 600; 700; 800; 900; 1000; corresponding to nominal pipe sizes NPS: — ⅜; ½; ¾; 1; 1 ¼; 1 ½; 2; 2 ½; 3; 4; 5; 6; 8; 10; 12; 14; 16; 18; 20; 24; 28; 32; 36; 40; and applies to valves of the following pressure designations: — PN 10; 16; 25; 40; 63; 100; — Class 150; 300; 600. This document applies to bolted bonnet steel gate valves used for all industrial applications. Additional requirements given in the relevant application standards can apply to bolted bonnet steel gate valves used for more specific applications (e.g. for the water industry, the chemical and petrochemical process industry, the oil and gas industry).

Industrial valves - Bolted bonnet steel gate valves

ASTM B1000-21 城市废水、污水以及水处理行业中使用的搪瓷衬里管, 配件以及阀门的浇筑制备和试验程序的标准规程

1.1?The following procedures and practices are intended to provide guidelines for processing and quality control that will provide acceptable results for the intended end use, keeping in mind the varying quality of the castings available. 1.2?The recommendations are based on wh

Standard Practices for Casting Preparation and Test Procedure of Porcelain Enamel-lined Pipe, Fittings, and Valves for Use in the Municipal Wastewater, Sewage, and Water Treatment Industry

ASTM F993-21 阀门锁紧装置的标准规格

1.1?This specification2 covers the application, design, and materials for valve locking devices. 1.2?Locking devices Types I and II described in this specification are designed to secure the valve in a fully opened or completely closed position. 1.3?This specification does not

Standard Specification for Valve Locking Devices

BS EN 13953:2020 液化石油气设备和附件. 可运输可再填充液化石油气 (LPG) 储罐用减压阀

LPG equipment and accessories. Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG)

DIN EN 12569:2020 工业阀门. 化学和石化过程工业阀门. 要求和试验; 德文版 EN 12569-2020

This document applies to valves of DN 15 and larger, made of metallic materials for chemical and petrochemical plants. It contains additional requirements to those contained in the relevant European product standards (e. g. EN 593, EN 1349) and EN 16668. The use of design codes o

Industrial valves - Valves for chemical and petrochemical process industry - Requirements and tests; German version EN 12569:2020

DIN EN ISO 17871:2020 气瓶. 速释气瓶阀门. 规格和型式试验 (ISO 17871-2020); 德文版本EN ISO 17871-2020

This International Standard in conjunction with ISO 10297:2014 and ISO 14246:2014 specifies design, type testing, marking and manufacturing tests, and examinations requirements for quick-release cylinder valves intended to be fitted to refillable transportable gas cylinders which

Gas cylinders - Quick-release cylinder valves - Specification and type testing (ISO 17871:2020); German version EN ISO 17871:2020

ASME A112.18.8-2020 污水管道系统用污水阀

Sanitary Waste Valves for Plumbing Drainage Systems

JB/T 13881-2020 船用阀门电动装置技术条件

Technical conditions for marine valve electric devices

JB/T 7746-2020 紧凑型锻钢阀门

Compact forged steel valve

JB/T 13882-2020 电站用高温高压平板闸阀

High temperature and high pressure flat gate valve for power stations

JB/T 13887-2020 自动控制回流阀

Automatic control return valve