J18 链传动、皮带传动与键联结 标准查询与下载

DIN ISO 4347:2011 叶片链,连接叉及槽轮.尺寸规格,计量力和抗拉强度(ISO 4347-2004)

This International Standard specifies the characteristics of chains used for general lifting purposes, together with the rim profiles of sheaves and the chain attachmens of clevises. It gives dimensions, limits for interchangeability, length measurement, preloading and minimum tensile strengths.It is not applicable to 8×8 lacing.

Leaf chaines, clevises and sheaves - Dimensions, measuring forces and tensile strengths (ISO 4347:2004)

JIS B 1810:2011 滚动链传动选择指南

This Japanese Industrial Standard gives guidelines for the selection of chain drives, composed of a roller chain, bush chain and sprockets specified in JIS B 1801.

Guidelines for the selection of roller chain drives

DIN ISO 13203:2011 链条,链齿轮和附件.等同术语表(ISO 13203-2005)

Chains, sprockets and accessories - List of equivalent terms (ISO 13203:2005)

ASME B29.1-2011 精密动力传动滚子链,连接件及链轮

Roller Chains are a series of alternately assembled roller links and pin links in which the pins articulate inside the bushings and the rollers are free to turn on the bushings. Pins and bushings are press fit in their respective link plates. Roller chain may be single-strand having one row of roller links, or mutliple-strand havings more than one roll of roller links, in which the center plates are located between the strands of roller links.

Precision Power Transmission Roller Chains, Attachments, and Sprockets

ASME B29.100-2011 双齿节滚动传送链、附件及链轮

This Standard covers double-pitch roller chains (and their attachments and sprockets) which consist of series of alternately assembled roller links and pin links in which the pins articulate inside the bushings and the rollers are free to turn on the bushings. The pins and the bushings are press-fitted into their respective link plates.

Double-Pitch Roller Chains, Attachments, and Sprockets

ANSI/ASME B29.1-2011 精确电力传输滚筒链,附件和链轮

Roller Chains are a series of alternately assembled roller links and pin links in which the pins articulate inside the bushings and the rollers are free to turn on the bushings. Pins and bushings are press fit in their respective link plates. Roller chain may be single-strand having one row of roller links, or mutliple-strand havings more than one roll of roller links, in which the center plates are located between the strands of roller links.

Precision Power Transmission Roller Chains, Attachment and Sprockets

ANSI/ASME B29.100-2011 精密输电,双间距输电和双间距输送滚子链,附件和链轮

This Standard covers double-pitch roller chains (and their attachments and sprockets) which consist of series of alternately assembled roller links and pin links in which the pins articulate inside the bushings and the rollers are free to turn on the bushings. The pins and the bushings are press-fitted into their respective link plates.

Precision Power Transmission, Double-Pitch Power Transmission, and Double-Pitch Conveyor Roller Chains, Attachments and Sprockets

ASTM D3950-11 非金属皮带(及连接方法)的标准规格

1.1 This specification covers nonmetallic strapping and joining methods intended for use in closing, reinforcing, and bundling articles for shipment, unitizing, palletizing, and bracing for car loading and truck loading. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 The following safety hazards caveat pertains only to the test method portion, Section 12, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Strapping, Nonmetallic (and Joining Methods)

KS B ISO 4156-2:2010 圆柱渐开线花键.米制模数、齿侧室心.第2部分:尺寸

이 표준은 측면 끼워 맞춤 직선(비헬리컬) 원통 인벌류트 스플라인의 설계와 제작에 대한 기

Straight cylindrical involute splines-Metric module, side fit-Part 2:Dimensions

KS B ISO 4156-3:2010 圆柱渐开线花键.米制模数、齿侧室心.第3部分:检验

이 표준은 측면 맞춤의 직선(비헬리컬) 원통형 인벌류트 스플라인의 검사에 대한 데이터와 지

Straight cylindrical involute splines－Metric module, side fit－Part 3：Inspection

KS B ISO 4156-1:2010 圆柱渐开线花键.米制模数、齿侧室心.第1部分:概述

이 표준은 측면 끼워 맞춤의 직선(비헬리컬) 원통 인벌류트 스플라인의 설계와 제작에 대한

Straight cylindrical involute splines-Metric module, side fit-Part 1:Generalities

KS B ISO 4183:2010 带传动.标准的和窄V带.带轮(标准宽度系列)

이 표준은 표준(단면 Y, Z, A, B, C, D, E) V-벨트 및 가는 나비(단면 S

Grooved pulleys for narrow V belts

JIS B 1804:2010 板式链

Leaf chains

DIN 5464:2010 带直边的花键轴连接. 重型系列

In this standard treats straight-sided splines with 0°angle of pressure, heavy series. This heavy series has relative to the DIN ISO 14 more teeth for higher load capacity. This standard provides geometry and the associated tolerances. The fundamental procedure details for the inspection from DIN ISO 14 are here also valid and not indicated additionally.

Straight-sided splines - Heavy series

JB/T 8545-2010 自动扶梯梯级链、附件和链轮

本标准规定了自动扶梯用梯级链条的结构型式、基本参数和尺寸、抗拉强度和链长精度,以及与这些链条相配的附件和链轮的技术要求。

Escalator step chains, attachments and sprockets

JB/T 10969-2010 多板销轴链

本标准规定了多板销轴链的结构型式、尺寸、长度测量、预拉载荷及最小抗拉强度等。 本标准适用于矿场、冶金等行业应用的多板销轴链。

Galle chains

JB/T 10970-2010 链条压出力试验规范

本标准规定了精密滚子链(含重载系列)、套筒链、摩托车链压出力试验的技术要求、样品制备、试验条件、试验方法等。 本标准适用于按GB／T 1243—2006、GB／T 14212—2003要求制造的链条。结构相同、型式尺寸相近的其他链条(不含电镀链条)，可参照执行。

Chains testing rules of extrusion force

JB/T 6368-2010 链条产品分类

本标准规定了链条产品分类的方法。 本标准适用于对链条产品进行分类和命名。

Classification for chain products

ASME B29.8-2010 叶状链,Ｕ型钩和轮

The document covers the lacing, pin diameter, diameter of link plate holes, link plate contour and thickness, chain widths, and minimum ultimate tensile strengths and also recommends clevis and sheave design.

Leaf Chains, Clevises, and Sheaves

ANSI/ASME B29.8-2010 叶状链,Ｕ型钩和滑车轮

This Standard covers Leaf Chains (series of link plates alternately assembled with pins in such a way that the joint is free to articulate between adjoining pitches); Clevises (devices used to anchor the chain) and Sheaves (grooved wheels defined in Fig 6 of the Standard). This Standard is not intended to be submitted for consideration as an ISO or ISO/IEC JTC-1 Standard.

Leaf Chains, Clevises and Sheaves