J42 量具与量仪 标准查询与下载
共找到 1176 条与 量具与量仪 相关的标准，共 79 页
Geometrical product specifications (GPS) - Workshop plug gauges and spherical plug gauges for inside diameters with tolerance class according to DIN EN ISO 286-1 and DIN EN ISO 286-2 from 1 mm to 500 mm nominal size - Deviations and tolerances for gauges
- ICS
- 17.040.40
- CCS
- J42
- 发布
- 2017-03
- 实施
The document applies to standard design micrometer callipers for external measurement for dimensions up to 500 mm, with a maximal measuring range of 25 mm and with a scale interval and a resolution of 0,01 mm respectively. It specifies the most important dimensional, functional and quality characteristics of micrometers and their testing.#,,#
Verification of geometrical parameters - Micrometers - Part 1: Standard design micrometer callipers for external measurement; concepts, requirements, testing
- ICS
- 01.040.17;17.040.30
- CCS
- J42
- 发布
- 2017-02
- 实施
- 0000-00-00
Small angle inspection instrument
- ICS
- 17.040.30
- CCS
- J42
- 发布
- 2017-01-09
- 实施
- 2017-07-01
Oil pipe thread parameter measuring instrument
- ICS
- 17.040.30
- CCS
- J42
- 发布
- 2017-01-09
- 实施
- 2017-07-01
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges
- ICS
- 17.040.10
- CCS
- J42
- 发布
- 2017-01-01
- 实施
本规程适用于分度值为0.01 mm，测量范围上限不超过300 mm的Ⅰ型深度千分尺和Ⅱ型深度千分尺的首次检定、后续检定和使用中检查。
Depth Micrometers
- ICS
- CCS
- J42
- 发布
- 2016-11-30
- 实施
- 2017-05-30
本标准规定了板厚千分尺的术语和定义、型式与基本参数、要求、试验方法、检查条件、检查方法、标志与包装。 本标准适用于分度值为0.01 mm、0.001 mm和分辨力为0.001 mm，测微螺杆螺距为0.5 mm、1 mm或其他规格，量程为10 mm、15 mm、25 mm或50 mm，测量范围上限最大至300 mm的机械读数板厚千分尺和电子数显板厚千分尺(统称板厚千分尺)。
Sheet metal micrometer
- ICS
- 17.040.30
- CCS
- J42
- 发布
- 2016-01-15
- 实施
- 2016-06-01
本标准规定了白光三维测量系统的术语和定义、型式、要求、检验条件、检验方法、标志与包装。 本标准适用于基十区域扫描的白光光学三维测量系统，也适用于蓝光、绿光、红外光、彩色光等光学三维测量系统。
White light 3D measuring systems
- ICS
- 17.040.30
- CCS
- J42
- 发布
- 2016-01-15
- 实施
- 2016-06-01
本标准规定了游标划线圆规的术语和定义、型式与基本参数、要求、检验条件、检验方法、标志与包装。 本标准适用于分度值为0.1 mm、测量和划线范围上限至3 000 mm的游标划线圆规。
Vernier crossed compasses
- ICS
- 17.040.30
- CCS
- J42
- 发布
- 2016-01-15
- 实施
- 2016-06-01
本标准规定了圆柱直齿渐开线花键量仪的术语和定义、型式、要求、检验方法、标志与包装。 本标准适用于测量分度圆直径D≤180 mm的圆柱直齿渐开线花键(见GB/T 3478)的圆柱直齿渐开线花键量仪(以下简称量仪)。GB/T 3478规定的分度圆直径D>180 mm或未规定的圆柱直齿渐开线花键的检验量仪，可参照使用。
Straight cylindrical involute splines.Meter
- ICS
- 17.040.30
- CCS
- J42
- 发布
- 2016-01-15
- 实施
- 2016-06-01
本标准规定了定中心杠杆指示表的术语和定义、型式与基本参数、要求、检验条件、检验方法、标志与包装。 本标准适用于分度值／分辨力为0.01 mm、0.005mm，指示表量程不大于3 mm的定中心杠杆指示表。
Centering dial indicator
- ICS
- 17.040.30
- CCS
- J42
- 发布
- 2016-01-15
- 实施
- 2016-06-01
本标准规定了闪测影像测量仪的术语和定义、型式与基本参数、要求、试验方法、检验条件、检验规则、标志与包装。 本标准适用于不带XY移动平台、被测量工件(或工件的被测量区域)可在测量范围内一次完整成像的影像测盘仪。
Quick video measuring machine
- ICS
- 17.040.30
- CCS
- J42
- 发布
- 2016-01-15
- 实施
- 2016-06-01
This part of ISO 1938 specifies the most important metrological and design characteristics of plain limit gauges of linear size. This part of ISO 1938 defines the different types of plain limit gauges used to verify linear dimensional specifications associated with linear size. This part of ISO 1938 also defines the design characteristics and the metrological characteristics for these limit gauges as well as the new or wear limits state Maximum Permissible Limits (MPLs) for the new state or wear limits state for these metrological characteristics. In addition, this part of ISO 1938 describes the use of limit gauges. It covers linear sizes up to 500 mm.
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size
- ICS
- 17.040.10;17.040.30
- CCS
- J42
- 发布
- 2015-11-01
- 实施
